Summary of the content on the page No. 1
INSTRUCTION MANUAL
3 series
Automatic Wrist Blood
Pressure Monitor
Model BP629
ESPAÑOL
ENGLISH
Summary of the content on the page No. 2
TABLE OF CONTENTS TABLE OF CONTENTS Before using the Monitor Introduction ......................................................................................................... 3 Safety Information ................................................................................................4 Operating the Device ..........................................................................4 Care and Maintenance .........................................................................
Summary of the content on the page No. 3
INTRODUCTION ® ® Thank you for purchasing the OMRON BP629 IntelliSense Automatic Wrist Blood Pressure Monitor. Fill in for future reference. DATE PURCHASED:__________________ SERIAL NUMBER:____________________ The monitor is compact and easy-to-use at home, at work, and during travel. Perfect for people who frequently monitor their own blood pressure. Your new digital blood pressure monitor uses the oscillometric method of blood pressure measurement. This means the monitor detect
Summary of the content on the page No. 4
SAFETY INFORMATION To assure the correct use of the product, basic safety measures should always be followed including the warnings and cautions listed in this instruction manual. SAFETY SYMBOLS USED IN THIS INSTRUCTION MANUAL Indicates a potentially hazardous situation which, if not avoided, WARNING could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, CAUTION may result in minor or moderate injury to the user or patient or damage to
Summary of the content on the page No. 5
SAFETY INFORMATION Do not use a cellular phone near the device. It may result in an operational failure. Use only Omron authorized parts and accessories. Parts and accessories not approved for use with the device may damage the unit. batteries. This may damage the unit. CARE AND MAINTENANCE Do not submerge the device or any of the components in water. Store the device and the components in a clean, safe location.
Summary of the content on the page No. 6
BEFORE TAKING A MEASUREMENT To ensure a reliable reading follow these recommendations: 1. Avoid eating, drinking alcohol, smoking, exercising, and bathing for 30 minutes before taking a measurement. Rest for at least 15 minutes before taking the measurement. 2. Stress raises blood pressure. Avoid taking measurements during stressful times. 3. The cuff can be applied to your left or right wrist. 4. Measurements should be taken in a quiet place. 5. Position the unit at heart level throughout the
Summary of the content on the page No. 7
KNOW YOUR UNIT Main Unit: Display Wrist cuff Memory (MEM) button Battery compartment START/STOP button Date/Time Setting ( ) button Date/Time Setting ( ) button Components: INSTRUCTION MANUAL 3 series Automatic Wrist Blood Pressure Monitor Model BP629 5329416-7A INTRODUCTION Thank you for purchasing the OMRON® BP629 IntelliSense® Automatic Wrist Blood Pressure Monitor . Fill in for future reference. DATE PURCHASED: __________________ SERIAL NUMBER: ____________________ 2 “AAA” Alkaline Batte
Summary of the content on the page No. 8
UNIT DISPLAY Systolic blood pressure Diastolic blood pressure Memory symbol Average value symbol Irregular heartbeat symbol Pulse display Movement error symbol Battery low symbol Date/Time display Blood pressure level indicator Heartbeat symbol (Flashes during measurement) Deflation symbol 8
Summary of the content on the page No. 9
DISPLAY SYMBOLS IRREGULAR HEARTBEAT SYMBOL ( ) When the monitor detects an irregular rhythm two or more times during the measurement, the Irregular Heartbeat Symbol ( ) will appear on the display with the measurement values. rhythm that varies by less than 25% from the Pulse average rhythm or 25% more than the average Blood rhythm detected while the monitor is measuring pressure the systolic and diastolic blood pressure. If the irregular heartbeat symbol ( ) displays w
Summary of the content on the page No. 10
DISPLAY SYMBOLS This is a general guideline because blood pressure depends on age and morbidity. A lower home blood pressure goal may be recommended for certain patients, including diabetic patients, pregnant women, and patients with renal failure. WARNING Self-diagnosis and treatment using measured results may be dangerous. Follow the instructions of your physician or licensed healthcare provider. WARNING DO NOT adjust medication based on measurement results from this b
Summary of the content on the page No. 11
BATTERY INSTALLATION CAUTION 1. Press the hook on the bottom of the battery cover and lift the cover off in the direction of the arrow. (negative) polarities match the polarities of the battery compartment as indicated. 3. Set the date and time. 4. Replace the battery cover. NOTE: Make sure that the battery cover is securely in position. 11
Summary of the content on the page No. 12
BATTERY INSTALLATION BATTERY REPLACEMENT Low Battery Indicator When the Low Battery Indicator appears on the display, turn the monitor off and remove all the batteries. Replace with 2 new batteries at the same time. Long-life alkaline batteries are recommended. WARNING plenty of clean water. Contact a physician immediately. NOTES: while the unit is still on, the date and time will be reset to that of the previous use. The measurement result
Summary of the content on the page No. 13
SETTING THE DATE AND TIME time. If the date and time has not been set, the measurement values are stored without any date or time information. 1. TO START THE SETTING Press the Date/Time Setting button ( ) to adjust the date and time. 2. SETTING THE YEAR Press the Date/Time Setting button ( ) to advance by increments of one year. Press the Date/Time Setting button ( ) to set the current year. NOTES: When the display r
Summary of the content on the page No. 14
SETTING THE DATE AND TIME 3. SETTING THE MONTH Press the Date/Time Setting button ( ) to advance by increments of one month. Press the Date/Time Setting button ( ) to set the current month. 4. SETTING THE DAY Press the Date/Time Setting button ( ) to advance by increments of one day. Press the Date/Time Setting button ( ) to set the current day. 5. SETTING THE HOUR The time is set using AM or PM. Press the Date/Time Setting button ( ) to advance by increments of one
Summary of the content on the page No. 15
APPLYING THE WRIST CUFF CAUTION Read all of the information in the instruction manual and any other literature in the box before operating the unit. CAUTION This device is intended for use in measuring blood pressure and pulse rate in the adult population. Do not use this device on infants or persons who cannot express their intentions. APPLYING THE CUFF ON THE LEFT WRIST 1. Roll up sleeve. Make sure your sleeve is not rolled up too your arm. 2. Wrap the cuff direct
Summary of the content on the page No. 16
APPLYING THE WRIST CUFF 5. Fold the remaining part of the wrist cuff back out of the way. APPLYING THE CUFF ON THE RIGHT WRIST When taking a measurement using the right wrist position the cuff as shown in the illustration. 16
Summary of the content on the page No. 17
TAKING A MEASUREMENT 2. Hold your arm across your chest at heart level. Sit still and do not talk or move during the measurement. 3. Press the START/STOP button. All symbols appear on the display. 17
Summary of the content on the page No. 18
TAKING A MEASUREMENT The Heartbeat Symbol ( Remain still and do not move until the entire measurement process is completed. NOTE: 4. After the monitor has detected your blood pressure blood pressure and pulse rate are displayed. 5. Press the START/STOP button to turn the monitor off. NOTE: The monitor will automatically turn off after two minutes. 18
Summary of the content on the page No. 19
USING THE MEMORY FUNCTION Every time you complete a measurement the monitor stores the blood pressure and pulse rate in the memory. The monitor automatically stores up to 60 sets of measurement values (blood pressure and pulse rate). When 60 sets of measurement values are stored, the oldest record is deleted to save the most recent values. AVERAGING FUNCTION The monitor calculates the average reading based on up to the three most recent sets of measurement values taken within 10 minutes of t
Summary of the content on the page No. 20
USING THE MEMORY FUNCTION NOTES: The date and time are alternately displayed with the measurement values. 3. Press the START/STOP button to turn the monitor off. TO DELETE ALL VALUES STORED IN THE MEMORY You cannot partially delete values stored in the memory. All values will be deleted. 1. Press the START/STOP button to turn the monitor on. 2. While holding the MEM button, press the START/STOP button down for more than 5 seconds until the display appe
