Summary of the content on the page No. 1
Owner’s manual
Mode d’emploi
Manual de instrucciones
RMX465D
AM/FM MD PLAYER WITH CD
CHANGER CONTROL
•
LECTEUR MD AM/FM AVEC
COMMANDE DE CHANGEUR CD
•
RADIO DE AM/FM Y REPRODUCTOR DE
MINIDISCOS CON CONTROL DE CAMBIADOR
DE DISCOS COMPACTOS
6
Clarion Co., Ltd.
PE-4026B
All Rights Reserved. Copyright © 1999: Clarion Co., Ltd.
1999/12 (A·C) 280-7434-00
Printed in China / Imprimé en Chine / Inpreso en China
Summary of the content on the page No. 2
Thank you for purchasing this Clarion product. Memorándum ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer. The CD changer has its own manual, but no explanations for operating it are described. Contents 1. FEATURES .
Summary of the content on the page No. 3
Handling MD 11. ESPECIFICACIONES 2. PRECAUTIONS Use only MDs bearing the mark. 1. When the inside of the car is very cold and 2. Driving on extremely bumpy roads which Sintonizador de FM Audio Handling Storage the player is used soon after switching on cause severe vibration may cause the sound Gama de frecuencias: Salida máxima de potencia: the heater moisture may form on the disc or to skip. • Do not expose minidiscs to direct sunlignt or • Never open the shutter on the MD cartridge. 180 W (4
Summary of the content on the page No. 4
4. NOMENCLATURE 3. CONTROLS / LES COMMANDES / CONTROLES 10. INDICACIONES DE ERROR Note: Cuando ocurra un error, se visualizará el tipo del mismo. • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). Tome las medidas descritas a continuación para solucionar el problema. Source unit / Appareil pilote / Unidad fuente Names of Buttons Indicación de error Causa Solución ERROR 2 En el interior del deck de minidiscos Ésta es una avería del mecanism
Summary of the content on the page No. 5
5. DCP The control panel can be detached to prevent Storing the DCP in the DCP Case theft. When detaching the control panel, store it Hold the DCP, in the orientation as shown in the in the included DCP case to prevent scratches. figure below, and put it into the supplied DCP We recommend taking the control panel with you case. (Ensure the DCP is in the correct orienta- when leaving the car. tion.) Removing the DCP 1. Hold down POWER button 3 for 1 second or longer to turn off the power. 2. Pres
Summary of the content on the page No. 6
6. REMOTE CONTROL Receiver for remote control unit 6 Operating range: 30° in all directions Remote control unit Signal transmitter ¥ ) * ( & ™ ¡ £ ¢ § ∞ Inserting the Batteries 1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow. AA (UM-3/1.5V) 2. Insert the AA (UM-3/1.5V) batteries that came Batteries with the remote control unit facing in the directions shown in the figure, then close the rear cover. Notes: Using batteries improperly can cause them
Summary of the content on the page No. 7
Functions of Remote Control Unit Buttons Mode Radio MD CD changer Button ¥ FUNC Turns power on and off. When pressed and held for 1 second: Turns power off. Switches among radio, MD and CD changer. & BAND Switches reception band. Plays the first track. Moves the next disc in DISC UP Top play. increasing order. PROG TOP * VOLUME Increases and decreases volume (in all modes). ( SEARCH Moves preset channels up Moves tracks up and down. Moves tracks up and and down. When pressed and held for down. 1
Summary of the content on the page No. 8
7. OPERATIONS Note: Be sure to read this chapter referring to the front diagrams of Basic Operations chapter “3. CONTROLS” on page 5 (unfold). Adjusting the volume CAUTION Turning the Rotary volume knob $ clockwise Be sure to lower the volume before switch- increases the volume; turning it counterclockwise ing off the unit power or the ignition key. The decreases the volume. unit remembers its last volume setting. If you ∗ The volume level is from 0 (minimum) to 33 (maxi- switch the power off wi
Summary of the content on the page No. 9
Basic Operations Adjusting the bass ommended to use the loudness effect. 1. Press and hold LD button 2 for 1 second or 1. Press A-M button 2 and select “BASS”. longer to turn on the loudness effect. When 2. Turning the Rotary knob $ clockwise empha- the loudness effect is turned on, the display sizes the bass; turning it counterclockwise will show “LOUD ON”. attenuates the bass. 2. Press and hold LD button 2 for 1 second or ∗ The factory default setting is “0”. (Adjustment longer to turn off
Summary of the content on the page No. 10
Radio Operations button # is pressed, the station is sought in FM reception the direction of lower frequencies. For enhanced FM performance the ® tuner includes signal actuated Manual tuning stereo control and Multipath noise reduction There are 2 ways available: Quick tuning and step circuits. tuning. When you are in the step tuning mode, the Changing the reception area frequency changes one step at a time. In quick This unit is initially set to USA frequency intervals tuning mode, you can qu
Summary of the content on the page No. 11
Radio Operations MD Operations Auto store Loading an MD Auto store is a function for storing up to 6 stations 1. After confirming the orientation of an MD, insert the MD into the insertion slot. that are automatically tuned in sequentially. If 6 stations cannot be received, a previously stored Notes: station remains unoverwritten at the memory • Never insert foreign objects into the MD insertion position. slot. • If an MD is not inserted easily, there may be 1. Press BND button @ and select the
Summary of the content on the page No. 12
MD Operations Selecting a track Random play Track-up The random play selects and plays individual tracks on a disc in no particular order. This function 1. Press the right side of SRCH button # to continues automatically until it is canceled. move ahead to the beginning of the next track. 1. Press RDM button 7. “RDM” lights in the 2. Each time you press the right side of SRCH display, an individual track is selected button #, the track advances ahead to the randomly and play begins. beginning
Summary of the content on the page No. 13
8. OPERATIONS OF ACCESSORIES CD Changer Operations 2. Each time you press the right side of SRCH CD changer functions button #, the track advances ahead to the When an optional CD changer is connected beginning of the next track. through the C-BUS cable, this unit controls all Track-down the CD changer functions. This unit can control a total of 2 changers. 1. Press the left side of SRCH button # to move back to the beginning of the current track. Press FNC button 3 and select the CD changer m
Summary of the content on the page No. 14
CD Changer Operations 1. Press and hold SCN button 9 for 1 second Disc random play or longer. “DISC” and “SCN” light in the display The disc random play selects and plays individual and the disc scan play starts. tracks or discs automatically in no particular 2. To cancel the disc scan play, press SCN button order. This function continues automatically until 9 again. “DISC” and “SCN” go off from the it is canceled. display and the current track continues to play. 1. Press and hold RDM button 7 f
Summary of the content on the page No. 15
9. TROUBLESHOOTING Problem Cause Measure Power does not Fuse is blown. Replace with a fuse of the same amperage. If the turn on. fuse blows again, consult your store of purchase. (No sound is produced.) Incorrect wiring. Consult your store of purchase. No sound output Power antenna lead is 1. Turn the unit off. when operating shorted to ground or 2. Remove all wires attached to the power antenna the unit with excessive current is required lead. Check each wire for a possible short to amplifiers
Summary of the content on the page No. 16
10. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Cause Error Display Measure ERROR 2 An MD is caught inside the MD deck and This is a failure of MD deck’s mechanism is not ejected. and consult your store of purchase. ERROR 3 An MD cannot be played due to scratches, Replace with a non-scratched, etc. non-warped-disc. ERROR 6 An MD is loaded upside-down inside the Eject the disc then reload it properly. M
Summary of the content on the page No. 17
11. SPECIFICATIONS FM Tuner Audio Frequency Range: Maximum Power Output: 87.9 MHz to 107.9 MHz 180 W (45 W × 4 ch) (EIAJ) Usable Sensitivity: Continuous Average Power Output: 11 dBf 16 W × 4, into 4 Ω , 20 Hz to 20 kHz, 1%THD 50dB Quieting Sensitivity: Bass Control Action (30 Hz): 17 dBf ±13 dB Alternate Channel Selectivity: Treble Control Action (10 kHz): 75 dB ±10 dB Stereo Separation (1 kHz): Line Output Level (MD 1 kHz): 35 dB 1.8 V Frequency Response (±3 dB): 30 Hz to 15 kHz General Power
Summary of the content on the page No. 18
Memo 20 RMX465D
