Multiquip MVC-64HW user manual

User manual for the device Multiquip MVC-64HW

Device: Multiquip MVC-64HW
Category: Biscuit Joiner
Manufacturer: Multiquip
Size: 1.4 MB
Added : 4/30/2013
Number of pages: 72
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Multiquip MVC-64HW. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Multiquip MVC-64HW.

For your convenience

If looking through the Multiquip MVC-64HW user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Multiquip MVC-64HW on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Multiquip MVC-64HW to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Multiquip MVC-64HW User manual - Online PDF
Advertisement
« Page 1 of 72 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Multiquip MVC-64HW but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Multiquip MVC-64HW. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

OPERATION AND PARTS MANUAL
Plate Compactor
Models
MVC-64H/HW
(Honda GX120K1 Gasoline Engine)
Revision #5 (03/01/07)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

Summary of the content on the page No. 2

l PAGE 2 — MVC-64H/HW PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #5 (03/01/07)

Summary of the content on the page No. 3

NOTE PAGE MVC-64H/HW PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #5 (03/01/07) — PAGE 3

Summary of the content on the page No. 4

TABLE OF CONTENTS Honda GX120K1SM12 Multiquip MVC-64H/HW Engine Plate Compactor Cylinder Head Assembly .................................... 38-39 Proposition 65 Warning ............................................. 2 Cylinder Barrel (Recoil) Assembly ..................... 40-41 Here's How To Get Help ............................................ 3 Crankcase Cover Assembly............................... 42-43 Table Of Contents ..................................................... 4 Crankshaft Asse

Summary of the content on the page No. 5

PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Order parts on-line using Multiquip’s SmartEquip website! Username and Password, E-mail us at: parts@multiquip.com. ■ View Parts Diagrams To obtain an MQ Account, contact your ■ Order Parts District Sales Manager for more information. ■ Print Specification Information Use the internet and qualify for a 5% Discount Got

Summary of the content on the page No. 6

MVC-64H/HW — SPECIFICATIONS TS ABLE 1. COMPACTOR SPECIFICATION MW odel MVC-64H/H C) entrifugal Force 2,275 lbs. (1,032 kg V) ibration Frequency 5,600 vpm (93 Hz M) aximum Forward Speed 82 ft/min (25 m/min Plate Size (L x W) 21.3 x 13.8 in (541 x 350 mm) Overall Dimensions (L x W x H) 34.6 x 13.8 x 34.9 in (879 x 350 x 886 mm) O) perating Weight (with water tank) 165 lbs. (75 kg O) perating Weight (without water tank) 143 lbs. (65 kg Maximum Area of Compaction 5,658 sq. ft/hr (526 sq. m/hr) Table

Summary of the content on the page No. 7

MVC-64H/HW — DIMENSIONS Figure 1. MVC-64H/HW Plate Compactor Dimensions TABLE 3. DIMENSIONS REFERENCE LETTER DESCRIPTION DIMENSION In. (mm) Height (Handle Upright) 36 In. (914 mm) A Width 13 In. (330 mm) B Length (Handle Upright) 25 In. (635 mm) C Plate Length 21 In. (533 mm) D Length (Handle Lowered) 36 In. (914 mm) E Height (Compactor Only) 25 In. (635 mm) F 27 x 15 x 28 In. Shipping Dimensions (686 x 381 x 711) MVC-64H/HW PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #5 (03/01/07) — P

Summary of the content on the page No. 8

MVC-64H/HW — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! HAZARD SYMBOLS Potential hazards associated with the operation of the MQ Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Model MVC-64H/HW Plate Compactor. will be referenced Messages and Operating Instructions could result in injury to with Hazard Symbols which appear throughout this manual, yourself and others. and will be referenced

Summary of the content on the page No. 9

MVC-64H/HW — SAFETY MESSAGE ALERT SYMBOLS CAUTION - Equipment Damage Hazards CAUTION - Rotating Parts Hazards NEVER operate equipment with covers, Other important messages are provided throughout this or guards removed. Keep fingers, hands, manual to help prevent damage to your light tower, other hair and clothing away from all moving property, or the surrounding environment. parts to prevent injury. CAUTION - Accidental Starting Hazards WARNING - Read Manual ALWAYS place the power source, cir

Summary of the content on the page No. 10

MVC-64H/HW — RULES FOR SAFE OPERATION ■NEVER touch the hot exhaust CAUTION - Read Manual! manifold, muffler or cylinder. Allow these parts to cool before servicing Failure to follow instructions in this engine or mixer. manual may lead to serious injury or ■High Temperatures – Allow the even death! This equipment is to be engine to cool before adding fuel or operated by trained and qualified performing service and maintenance functions. Contact personnel only! This equipment is for with hot! co

Summary of the content on the page No. 11

MVC-64H/HW — RULES FOR SAFE OPERATION ■ NEVER run engine without air filter. Severe engine damage TRANSPORTING may occur. ■ ALWAYS shutdown engine before transporting. ■ ALWAYS service air cleaner frequently to prevent carburetor ■ Tighten fuel tank cap securely and close fuel cock to malfunction. prevent fuel from spilling. ■ ALWAYS be sure the operator is familiar with proper safety ■ Drain fuel when transporting compactor over long precautions and operations techniques before using distances

Summary of the content on the page No. 12

MVC-64H/HW — OPERATION AND SAFETY DECALS Machine Safety Decals The MVC-64H/HW Plate Compactor is equipped with a number of safety decals (Figure 2). These decals are provided for operator safety and maintenance information. The illustration below shows these decals as they appear on the machine. Should any of these decals become unreadable, replacements can be obtained from your dealer. l Figure 2. Operation and Safety Decals PAGE 12 — MVC-64H/HW PLATE COMPACTOR — OPERATION & PARTS MANUAL

Summary of the content on the page No. 13

MVC-64H/HW — GENERAL INFORMATION Definition of Plate Compactor Frequency/Speed The Mikasa MVC-64H/HW is a walk behind, plate compactor The compactor's vibrating plate has a frequency of 5,600 vpm designed for the compaction of sand, mixed soils and asphalt. (vibrations per minute). The travel speed of the compactor is This plate compactor is a powerful compacting tool capable of approximately 82 ft./minute (25 meters/minute). applying a tremendous force in consecutive high frequency Engine v

Summary of the content on the page No. 14

MVC-64H/HW — COMPONENTS (PLATE COMPACTOR) Figure 3. MVC-64H/HW Plate Compactor Components Figure 3 shows the location of the components and general 6. Belt Cover – Remove this cover to gain acess to the V- maintenance parts. The function of each component is described belts. NEVER run the compactor without the V-belt cover. If below: the V-belt cover is not installed, the possibility exist that your hand may get caught between the V-belt and clutch, 1. Water Tank Cap (for MVC-64HW only) – Re

Summary of the content on the page No. 15

MVC-64H/HW — COMPONENTS (HONDA GX120K1SM12 ENGINE) Figure 4. Engine Controls & Components INITIAL SERVICING 8. Spark Plug – Provides spark to the ignition system. Set The engine (Figure 4) must be checked for proper lubrication and spark plug gap to 0.6 - 0.7 mm (0.028 - 0.031 inch) for filled with fuel prior to operation. Refer to the manufacturer's engine HONDA engine. Clean spark plug once a week. manual for instructions and details of operation and servicing. 9. Muffler – Used to reduce n

Summary of the content on the page No. 16

MVC-64H/HW — INSPECTION The Oil Alert system will Before Starting automatically stop the engine NOTE 1. Read safety instructions at the beginning of manual. before the engine falls below safe limits. Always be sure to check 2. Clean the compactor, removing dirt and dust. Particularly, the the engine oil level prior to starting bottom of the plate, engine cooling air inlet, carburetor and the engine. air cleaner. 3. Check the air filter for dirt and dust. If the air filter is dirty, blow Table 4

Summary of the content on the page No. 17

MVC-64H/HW — INSPECTION V-Belt Check 2. The V-belt tension is proper if the V-belt bends 10 to 15 mm (Figure 10) when depressed with finger at midway between Caution - V-Belt check the clutch and vibration pulley shafts. NEVER attempt to check the V-belt with the engine running. Severe injury can occur if your hand (Figure 7) gets caught between the V-belt and the clutch. Always use safety gloves. CLUTCH PULLEY Figure 9. V-Belt Tension 3. A loose V-belt will decrease the power transmission outp

Summary of the content on the page No. 18

MVC-64H/HW — INITIAL START-UP The CLOSED position of the Caution - Read Manual choke lever enriches the fuel NOTE mixture for starting a COLD D DO NOT attempt to operate the plate compactor engine. The OPEN position until the Safety, General Information and provides the correct fuel mixture Inspection sections of this manual have been for normal operation after read and thoroughly understood. starting, and for restarting a warm engine. 1. Place the fuel valve lever (Figure 11) in the "ON" posi

Summary of the content on the page No. 19

MVC-64H/HW — INITIAL START-UP/OPERATION 6. If the engine has started, slowly return the choke lever Operation (Figure 13) to the CLOSED position. If the engine has not started repeat steps 1 through 5. CAUTION - Safety Rules 7. Before the compactor is put into operation run the engine for Make sure to follow all safety rules referenced in the safety 3-5 minutes. section of this manual before operating compactor. Keep work area clear of debris and other objects that could cause 8. Check for abno

Summary of the content on the page No. 20

MVC-64H/HW — MAINTENANCE CAUTION - Inspection Intervals CAUTION - Inspection These inspection intervals are for operation under normal Inspection and other services should always be carried out conditions. Adjust your inspection intervals based on the on hard and level ground with the engine shut down. number of hours plate compactor is in use, and particular working conditions. Inspection and Maintenance Service Tables. 1. To make sure your plate compactor is always in good working condition


Alternative user manuals
# User manual Category Download
1 Multiquip MVC-64H User manual Biscuit Joiner 0
2 Multiquip GX12061 User manual Biscuit Joiner 0
3 Multiquip MVC98D2 User manual Biscuit Joiner 0
4 Multiquip MVC-64E/EW User manual Biscuit Joiner 2
5 Multiquip MVH-306D User manual Biscuit Joiner 0
6 Multiquip MVH-306DS User manual Biscuit Joiner 1
7 Multiquip MVC88VTH User manual Biscuit Joiner 0
8 Multiquip MVC88VTHW User manual Biscuit Joiner 2
9 Multiquip MVH406GH User manual Biscuit Joiner 0
10 Philips AK 640 User manual Biscuit Joiner 0
11 Bil-Jax B33-01-0078 User manual Biscuit Joiner 1
12 Philips MCD515 User manual Biscuit Joiner 0
13 Chicago Electric 68987 User manual Biscuit Joiner 14
14 Black & Decker Workmate 225 Type 6 User manual Biscuit Joiner 22
15 Black & Decker 3382 User manual Biscuit Joiner 3