Summary of the content on the page No. 1
Homeowners Guide
Bath Whirlpool
K-1111
M product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de M corresponden a México
(Ej. K-12345M)
Français, page “Français-1”
Español, página ″Español-1”
1042951-5-B
Summary of the content on the page No. 2
Operating Instructions INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING: When using electrical products, basic precautions should always be followed, including the following: DANGER: Risk of personal injury. To reduce the risk of injury, do not permit children to use this unit unless they are closely supervised at all times. WARNING: Risk of personal injury. To avoid injury, exercise care when enter
Summary of the content on the page No. 3
Operating Instructions (cont.) Keep small objects such as bath toys and bathing accessories out of the whirlpool while the unit is running. Repeated use of personal care products containing oils can damage plastic whirlpool components. Do not use heavy, vegetable-based shampoos or bath oils. Whirlpool hydro-massage action can cause even a small amount of bubble bath, bath soap, shampoo, or bath oil to foam excessively. For this reason, please don’t use these products during whirlpool operation.
Summary of the content on the page No. 4
The user keypad allows you to turn The bath provides a reservoir the whirlpool and heater on and off for the hydro-massage action. and regulate the water flow. Adjustable jets allow you to The heater helps adjust the air and water flow maintain the water and direction. temperature up to 104˚F (40˚C). NOTE: Bath shown for The pump motor provides illustrative purposes. quiet, variable speed power Your bath model may vary. to circulate the water. Your Kohler Whirlpool Your new whirlpool i
Summary of the content on the page No. 5
Flexjet Flow Mode Increases Flow or Pulse Rate Activates Mode Selected Indicator Bar - Shows Rotate outer Water Flow Volume ring to access desired mode. Chromatherapy Chromatherapy - Cycle Specific Color Power Decreases On/Off Flow Heater Lighted User Keypad On/Off User Keypad Operation NOTE: Symbols illuminated in blue indicate available modes/features. Active modes will be illuminated in green. Power On/Off - The whirlpool pump turns on and off using the power button. Heater On/Off -
Summary of the content on the page No. 6
Chromatherapy Operation (cont.) Rotate the outer ring on the keypad to select this mode and press ″OK″ to activate it. Use the up or down arrows to reach the desired color and press ″OK″ to activate the desired color. 1042951-5-B 6 Kohler Co.
Summary of the content on the page No. 7
Fill with water 2" (5.1 cm) above the highest jet. Position the jet nozzles Turn the Flexjet to direct the water flow trim clockwise to as desired. decrease the flow. Turn the Flexjet trim counterclockwise to increase the flow. Filling and Operating Your Whirlpool NOTE: Please read these steps carefully before operating your whirlpool. NOTE: The water temperature in the whirlpool should not exceed 104° F (40° C). The heater will automatically turn off as the water temperature approaches 1
Summary of the content on the page No. 8
Power Activates Increases Mode Flow or Selected Pulse Decreases Mode Flow or Selector Pulse FCC Compliance FCC ID : N82-KOHLER001 Canada ID : 4554A-KOHLER001 Compliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired op
Summary of the content on the page No. 9
Programming the Remote Control (cont.) Turn the whirlpool power on. Turn off all modes of operation. Wait approximately one minute until the keypad darkens completely. On the user keypad, press the up arrow, down arrow and the ″OK″ button simultaneously. The bottom LED on the keypads indicator bar will begin flashing. While the LED is flashing, press the ″OK″ button on the keypad. A light sequence will illuminate up and down the indicator bar. While the indicator bar light sequence is active, pres
Summary of the content on the page No. 10
Limited One-Year Warranty For the U.S.A. and Canada Only KOHLER plumbing fixtures, faucets and fittings are warranted to be free of defects in material and ® workmanship for one year from date of installation. Kohler Co. will, at its election, repair, replace or make appropriate adjustment where Kohler Co. inspection discloses any such defects occurring in normal usage within one year after installation. Kohler Co. is not responsible for removal or installation costs. To obtain warranty service, c
Summary of the content on the page No. 11
One-Year Warranty - For Mexico (cont.) fashion and as a consequence has suffered damages attributable to the consumer, individual, or hardware not authorized by Kohler Co. 3. This warranty does not cover the damages as a result of disaster such as fire or acts of God, including flooding, earthquake, or electric storms, etc. To obtain a list of distributors in your area where you can exercise your rights under this warranty, please call 001-877-680-1310. KOHLER CO., KOHLER, WI 53044 U.S.A. IMPORTER
Summary of the content on the page No. 12
Troubleshooting Procedures (cont.) Symptoms Probable Causes Recommended Action B. Wiring harness from user B. Check wiring for proper keypad to control is loose, connections. Replace wiring disconnected, or damaged. harness if necessary. Refer to the installer/dealer. C. User keypad does not work. C. Replace user keypad. Refer to the installer/dealer. D. Control does not work. D. Replace control. Refer to the installer/dealer. 5. User keypad is illuminated, but A. Power cord from pump to A. Chec
Summary of the content on the page No. 13
Troubleshooting Procedures (cont.) Symptoms Probable Causes Recommended Action B. Dry or dislodged jet O-ring B. Remove jet, replace and (squeal). lubricate O-ring, and reinstall jet. 13. Remote control does not work. A. Batteries improperly installed A. Replace batteries. or dead. B. Antenna on wiring harness is B. Replace wiring harness. Refer damaged. to the installer/dealer. C. Remote control not C. See homeowners guide or programmed correctly. service manual. D. Remote control does not work
Summary of the content on the page No. 14
1019933 Chromatherapy Lights *Note: All tubing 1" unless otherwise noted. 93841 Screw 95462** Pillow 1012821 Light Housing 1010618 Elbow 1049953 Lens 1049954 Nut 1048233 LED Lighting Harness Tee Heater 1048232 Plug/Wire Assembly 1015017 Plug/Wire Assembly 1-1/2" Tubing 1-1/2" Tubing 1-1/2" Tubing **Finish/color code must be specified when ordering. Service Parts 1042951-5-B 14 Kohler Co.
Summary of the content on the page No. 15
1003065 Suction Flange 73518 Removal Tool Plug 93685 Housing 96708 Flange 65886 (Acrylic and FRP) 60050 (Cast Iron) 65054** Gasket Screw 96895** (Colored Finishes) 65061** (Metal Finishes) Cover 65226** Suction Cover Plug 93836 (1/2") 93837 (3/4") 93838 (1") 93839 (1-1/4") 94853 (1-1/2") Tube (w/Couplings) 91967 Check Valve 67665 Plug 94469 Flange Removal Tool 67429 Flange 67889 Jet Housing 65885 (Acrylic and FRP) 67668 (Cast Iron) Gasket 34353 O-Ring Single Jet For Whirlpools With 5 or Less J
Summary of the content on the page No. 16
61776 1018964 Lock Washer 1033678 Bracket 67065 60320 Screw Ground Lug Screw 1001794 93892-A 61776 Locknut Electrical Box Lock Washer 67065 Ground Lug 60320 Screw 93893 Cover 61845-K 93003 Copper Grounding Wire 1019433 Strain Relief 1005363 Carriage Bolt Nut 1010029 1034673 Pump Tee Connector To Tee Heater 90153 Nut 94821 O-Ring 1016953 1016954 1.5 HP Pump Motor 1010673 Seal 1010548 Volute 1010676 Cover 1010677 1013755 Screw Impeller 1019446-A [1-3/4" (4.4 cm)] 1010675 1019446-B [2-3/4" (7 cm)]
Summary of the content on the page No. 17
1012653 1022408 Adapter 1032545 In-line Heater Housing 1012916 Nut w/Screws 94821 O-Ring 1011679 94821 Gasket O-Ring 1012653 Adapter 1012977 Adapter 1018710 Tee Heater 94821 1012916 O-Ring Nut with Screws 94821 O-Ring 1012977 Adapter 1011679 Gasket **Finish/color code must be specified when ordering. Kohler Co. 17 1042951-5-B
Summary of the content on the page No. 18
1020677 Gasket 1023381 Wrench 65157 Nut 1013453 Spring 1013452** Dial Trim 1013499 Housing Carefully study decal and cover detail below for proper service part identification 91639 O-Ring 1020678-A 1020678-B Cover/Circuit Board Cover/Circuit Board (w/Wrench) (w/Wrench) 1013497-B 1013497-A Decal Decal 1020678-C 1020678-D Cover/Circuit Board Cover/Circuit Board (w/Wrench) (w/Wrench) 1013497-C 1013497-D Decal Decal 1020678-E 1020678-M Cover/Circuit Board Cover/Circuit Board (w/Wrench) (w/Wren
Summary of the content on the page No. 19
1013464-A 1013822-A** Decal Remote w/Stand 1023091** Cap 1022253-A** 1013471** Remote Stand 1013822-B** 1013464-B Remote w/Stand Decal 1023091** Cap 1022253-B** Remote 1013471** Stand **Finish/color code must be specified when ordering. Kohler Co. 19 1042951-5-B
Summary of the content on the page No. 20
Guide du propriétaire Baignoire à hydromassage Renseignements importants CONSIGNES RELATIVES AUX RISQUES D’INCENDIE, D’ÉLECTROCUTION OU DE BLESSURES CORPORELLES LIRE ET SUIVRE TOUTES LES INSTRUCTIONS CONSERVER CES INSTRUCTIONS AVERTISSEMENT : Lors de l’utilisation des produits électriques, des précautions de base devraient toujours être observées, incluant ce qui suit: DANGER : Risque de blessure corporelle. Afin de réduire les risques de blessures, ne jamais permettre à un enfant d’utiliser cet
