Fisher-Price GO DIEGO GO K6673 user manual

Summary of the content on the page No. 1

K6673
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Tools required for assembly: Phillips Screwdriver,
Hammer and Scrap Block of Wood (not included).
Age: 2-5 years
Weight limit: 55 lbs (25 kg).
www.fi sher-price.com

Summary of the content on the page No. 2

Consumer Information WARNING CAUTION To avoid serious injury: This product contains small parts • Adult supervision is required. in its unassembled state. Adult assembly is required. • Never use near cars and other motor vehicles, near streets, steps, sloped IMPORTANT! driveways, hills, roadways, alleys, swimming • Please save all packaging material until assembly is pool areas or other bodies of water. complete to ensure that no parts are discarded. • Always wear shoes or sneakers. • Pleas

Summary of the content on the page No. 3

Assembly PUSH Straight Axle Assembly Seat Frame 3 Bottom View 1 • Turn the frame upside down. • Insert the straight axle assembly through the holes in • Fit the seat onto the frame. the rear of the frame. • Push fi rmly near the back end of the seat to "snap" it into place. Bushing (Grooved Side Down) Wheel (Flat Side First) Rear Wheel (Indented Side Down) Straight Axle Wheel Hub Bushing (Flat Side Down) (Smooth Side First) Wheel Hub (Pointed End First) 4 • Turn the assembly upright. • Slide

Summary of the content on the page No. 4

Assembly Pedal Axle Tab Pedal Hub Pedal Hub 7 • Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs fi t into the slot in each pedal hub. • While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the 5 front wheel. • Press the pedal hubs into the center of the front wheel • Fit the cap nut on the end of the straight axle. until they are fl ush with the surface of the front wheel. • Tap the cap nut with a hammer. Gently pull the rear •

Summary of the content on the page No. 5

Assembly Label Decoration Fork Post 3 4 7 8 Right Side Fork Covers 1 9 • Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the 2 fork covers face the rear wheels. 6 Fork Post Handlebar Front 5 Handlebar Back 3 ¾" Screw Left Side • Wipe the vehicle with a clean, dry cloth to remove any ¾" Screw oils before applying labels. 2¼" Screw • Apply labels exactly as shown in the illustrations. For best results, avoid repositioning the label af

Summary of the content on the page No. 6

Care Consumer Information • Periodically, check the plastic parts and if broken or IMPORTANT! It is a good practice to start training cracked, dispose of them properly. children very young regarding the importance of helmet use. When children are older and riding bicycles and • Periodically, check all fasteners regularly to be sure faster vehicles, it is important that they use a helmet they are tight. If the fasteners are not tight, tighten each and every time they ride. For this reason, e