Summary of the content on the page No. 1
8102REUSL000200/ FT-600R V1 By Firstech LLC Version 1.0 www.firstechonline.com www.compustar.com
User Manual
Applicable to the following remote(s)
600R (1Way 4Button Remote)
FCC ID : VA5JR260A433
Toll Free : 888-820-3690
21911 68th Ave S
Kent, WA 98032
Summary of the content on the page No. 2
Table of Contents Introduction Thank you for purchasing a Firstech 600R system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you Read this entire manual. Please note that this manual applies to the 600R 4 Button Remote. The 600R remote can be used with our remote start and keyless (CS600-S / AR600-S) Sending Commands 8 System. 600R can also be used with our basic alarm system(CS600-A) The AR-600-S offers keyless entry and remote start only. There ma
Summary of the content on the page No. 3
Remote Reference Quick Reference 600R (1-Way 4Button Remote) When servicing or loaning your vehicle to others, your remote start system should be placed in Valet mode. Valet mode prevents the system from remote starting and disables all alarm functions. Applicable to the Following models: IMPORTANT: While in Valet mode the remote start will still lock and unlock power lock systems. CM-600 With the CS600-A the alarm triggers will not function however the doors will still function. CM-1300 (alarm
Summary of the content on the page No. 4
Quick Reference Quick Reference Button Duration Additional Function / Description Additional Button Duration Function / Description Programming Required Programming Required 0.5 seconds No Locks doors and/or arms alarm. 0.5 seconds CS600-A Alarm Only Ignition Controlled Door Locks CS600-A Alarm Only 3.5 seconds Panic/vehicle locater (flashes vehicle’s parking lights and sounds siren and horn). 2.5 seconds No Option programming menu 2 - Installers Only. 0.5 seconds No Unlocks doors and/or disa
Summary of the content on the page No. 5
General System Functions General System Functions The remote transmitter functions have been predetermined and programmed from the factory. The four button configuration allows for keyless entry, trunk release, and/or remote start functionality. These commands may require additional parts and labor. Please check with your place of purchase for more information. The system can be configured to automatically lock and arm the vehicle 30 seconds after closing the last door. Place the system in pass
Summary of the content on the page No. 6
General System Functions General System Functions Hold button for 2.5 seconds to release the trunk or hatch. If you are in range, the vehicle’s parking lights will flash once and/or Only available with CS600-A alarm only system. siren chirp once indicating that the trunk release command has been successfully transmitted. Hold buttons simultaneously for 2.5 seconds to turn the shock sensor on and off. The vehicle’s parking lights will flash once and/or
Summary of the content on the page No. 7
General System Functions Remote Coding / Programming Routine IMPORTANT: The 600R remotes are preprogrammed to your system. In the even you need to program your remotes follow this simple procedure below. Only available with CS600-S / AR600-S Remote start only system. Timer start mode is used to cool or warm the vehicle without manually starting with the key or from the remote. While engaged, timer start will activate even while the remote is out of range. Hold buttons simultaneously for 2.5 s
Summary of the content on the page No. 8
Remote Start Error Diagnostic Limited Lifetime Warranty Firstech, LLC Warrants to the original purchaser that this product shall be free of defects in material and workmanship under normal use and circumstances for the period of Only available with CS600-S / AR600-S remote start only system. time that the original owner of this product owns the vehicle in which it is installed; except that the remote controller unit for the period of one year from the date of installation If the remote start fai
