Audiovox Prestige P-105 user manual

Summary of the content on the page No. 1

INSTALLATION MANUAL
P-105
AM/FM/MPX RADIO
WITH COMPACT DISC PLAYER,
CD CHANGER CONTROLS
AND QUARTZ CLOCK

Summary of the content on the page No. 2

INSTALLATION INSTRUCTIONS This unit is designed for installation in GM and Chrysler cars, trucks, and vans with a 1-1/2 DIN radio opening. In some cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialty shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line

Summary of the content on the page No. 3

WIRING COLOR CODES FUNCTION COLOR + 12 V Acc/Ignition Red + 12 V Battery/Memory Yellow Ground Black Dimmer Orange LF + Speaker White LF - Speaker White/Black LR + Speaker Green LR - Speaker Green/Black RF + Speaker Gray RF - Speaker Gray/Black RR + Speaker Violet RR - Speaker Violet/Black TYPICAL GM APPLICATION (See Figure 1.) Radio Preparation: NOTE: For GM car installations, use the GM Hardware Kit, Part Number 150-1343, which is furnished with the radio. 1. Match quickie bolt locations on th

Summary of the content on the page No. 4

WIRING DIAGRAM-TYPICAL INSTALLATION FOR GM (Figure 1) -4- LONG QUICKIE BOLT ITEM #3 REAR VIEW VEHICLE DASH NOTE: GM VEHICLES 1992 AND UP CD CHANGER WILL REQUIRE AN ANTENNA CONNECTOR ADAPTER CABLE TO CONVERT THE VEHICLE SIDE MINI CONNECTOR TO A STANDARD CONNECTOR 14 PIN PWR/SPKR CONNECTOR GM MINI- BARBLESS ANTENNA CABLE OR RCA CABLES ANTENNA SOCKET REAR BUSHING FACTORY RADIO FLANGE NUT ITEM #4 SPLICE WIRES FACTORY BRACKET VEHICLE VEHICLE SIDE OUTER DASH TRIM P-105 RADIO RADIO HARNESS GM WIRING

Summary of the content on the page No. 5

TYPICAL CHRYSLER APPLICATION (See Figure 2.) Radio Preparation: NOTE: For Chrysler car installations, use the Chrysler Hardware Kit, Part Number 150-1344, which is furnished with the radio. 1. Select two of the four mounting tabs provided and match the radio mounting style of the vehicle as shown in Figures 3, 4 and 5. NOTE: The tab number is stamped on the bottom of the tab. 2. Attach the mounting tabs to the radio chassis with the four small Phillips-head screws provided ( Item # 9). 3. Atta

Summary of the content on the page No. 6

TYPICAL INSTALLATION FOR CHRYSLER (Figure 2) -6- REAR VIEW CD CHANGER CONNECTOR ANTENNA CABLE VEHICLE DASH 14 PIN PWR/SPKR CONNECTOR FLANGE NUT ITEM #4 RCA CABLES (supplied) VEHICLE SIDE ANTENNA LONG QUICKIE SOCKET GROUNDING STRAP BOLT ITEM #3 SPLICE WIRES VEHICLE SIDE RADIO HARNESS P-105 RADIO CHRYSLER WIRING HARNESS ADAPTER VEHICLE (PURCHASED SEPARATELY) P-105 OUTER DASH TRIM WIRING HARNESS EXISTING MOUNTING HARDWARE OR 10mm SCREWS CHRYSLER APPLICATION MOUNTING TABS AND HARDWARE (See Figur

Summary of the content on the page No. 7

TAB #2 Figure 3 TAB #1 TAB #2 TAB #4 Figure 4 TAB #3 Figure 5 TAB #2 -7-

Summary of the content on the page No. 8

© 2001 Audiovox Electronics Corp., Hauppauge, NY 11788 128-5914A