Havis-Shields K-9 Transportation System KK-K9-D14-K user manual

Summary of the content on the page No. 1

INSTALLATION INSTRUCTIONS KK-K9-D14-K
K-9 TRANSPORTATION SYSTEM
1997-2003 DODGE DURANGO

TOOLS REQUIRED:
Power Drill Drill Bits – 1/8” Through 3/8”
Standard And Metric Socket Sets Phillips Screwdriver
6” Extension Wire Cutters and Crimping Tool
7/16” Wrench Ratcheting Wrench

HARDWARE: (some hardware included in assembly)
QTY: DESCRIPTION: PART #:
10 #10 X ½” Stainless Phillips Flat Head Screw GSM34150
70 1/4-20 X ½” Stainless Carriage Bolt GSM32022
96 1/4-20 Serrated Nut G

Summary of the content on the page No. 2

REMOVE INTERIOR: • Remove rear seats in vehicle • Remove door panels and handles • Remove seat belt assembly • Remove carpet in rear. Note: If doors have electric door switches, they must be reattached to original plug assembly. Switch assembly must then be wire tied down so it does not interfere with window or door latch operations. REMOVE OEM DOOR PANELS: • Remove plastic arm rest section that has window switch in it. • Remove switch assembly from plastic housing (leave plug o

Summary of the content on the page No. 3

INSTALL CEILING AND WALLS: • Install ceiling with ¼-20 x ½” carriage bolts and serrated nuts. • Install front wall with ¼-20 x ½” carriage bolts • Install rear wall of K-9 unit with ¼-20 x ½” carriage bolts. INSTALL TUNNELS & DOORS: • Loosely attach side tunnels to main housing 1/4-20 x ½” carriage bolts or 1/4-20 x ¾”carriage bolts depending on location. • Attach step to tunnel. MAIN HOUSING FINAL STEPS: • Mount rear housing use ¼-20 x 1-½” lag bolts. • Tighten all loose bolt