Summary of the content on the page No. 1
TABLE OF CONTENTS
SECTION PAGE
1
INTRODUCTION .............................................................3
1
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ..............................7
2
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ..............................71
3
4
UNDERSTANDING YOUR INSTRUMENT PANEL...................................161
4
5
STARTING AND OPERATING .................................................199
5
6
WHAT TO DO IN EMERGENCIES ...........................................
Summary of the content on the page No. 2
Summary of the content on the page No. 3
INTRODUCTION 1 CONTENTS Introduction ........................... 4 Van Conversions/Campers ................. 5 How To Use This Manual .................. 4 Vehicle Identification Number ............... 5 Warnings And Cautions ................... 5 Vehicle Modifications / Alterations ........... 6
Summary of the content on the page No. 4
4 INTRODUCTION INTRODUCTION WARNING! This manual has been prepared with the assistance of service and engineering specialists to acquaint you with Engine exhaust, some of its constituents, and certain the operation and maintenance of your new vehicle. It is vehicle components contain or emit chemicals supplemented by a Warranty Information Booklet and known to the State of California to cause cancer and various customer oriented documents. You are urged to birthdefectsorotherreproductiveharm.Ina
Summary of the content on the page No. 5
INTRODUCTION 5 WARNINGS AND CAUTIONS Operating instructions for the special equipment in- This manual contains WARNINGS against operating stalled by the conversion/camper manufacturer should 1 procedures which could result in an accident or bodily also be supplied with your vehicle. If these instructions injury. It also contains CAUTIONS against procedures are missing, please contact your selling dealer for assis- which could result in damage to your vehicle. If you do tance in obtaining replace
Summary of the content on the page No. 6
6 INTRODUCTION VEHICLE MODIFICATIONS / ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. NOTE: It is illegal to remove the VIN plate.
Summary of the content on the page No. 7
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS A Word About Your Keys ..................10 ▫ Power Door Locks .....................13 ▫ Key-In-Ignition Reminder ................10 Remote Keyless Entry — If Equipped .........16 ▫ Sentry Key — If Equipped ................10 ▫ To Unlock The Doors ...................16 Ignition And Steering Lock — If Equipped ......13 ▫ To Lock The Doors .....................17 ▫ Manual Transmissions ...................13 ▫ Using The Panic Alarm ......
Summary of the content on the page No. 8
8 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Security Alarm System — If Equipped .........20 ▫ Automatic Locking Retractors (ALR) Mode – If Equipped ..........................33 ▫ Rearming Of The System .................20 ▫ Center Lap Belts .......................34 ▫ To Set The Alarm ......................20 ▫ Seat Belt Pretensioners ...................34 ▫ To Disarm The System ...................20 ▫ Enhanced Seat Belt Reminder System Windows .............................21 (BeltAlert) .
Summary of the content on the page No. 9
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 9 Safety Tips ............................68 ▫ Safety Checks You Should Make Inside The Vehicle ..............................70 ▫ Transporting Passengers .................68 ▫ Safety Checks You Should Make Outside The ▫ Lock Your Vehicle ......................68 2 Vehicle ..............................70 ▫ Exhaust Gas ..........................69
Summary of the content on the page No. 10
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS SENTRY KEY — IF EQUIPPED The double sided keys may be inserted into the locks With this system, an electronically coded ignition key with either side up. The keys for your new vehicle are sends a signal to the vehicle electronics. If the electronics enclosed in a plastic bag with a bar code label affixed to recognizes the signal, the vehicle will start and continue the front. The bar code can be used to order duplicate to run.
Summary of the content on the page No. 11
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 The Security Light, located in the instrument cluster, At the time of purchase, the original owner is provided will illuminate for about 3 seconds when the ignition with a four digit PIN. This number is required for dealer switch is first turned to the ON position. If the vehicle replacement of keys. Duplication of keys may be per- electronics do not receive a valid signal from the ignition formed at an authorized dealer or by using the Customer 2
Summary of the content on the page No. 12
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Insert the second valid key and switch the ignition to General Information the ON position within 15 seconds. After 10 seconds the This device complies with part 15 of FCC rules and with Security Light will begin to flash. Turn the ignition back RS-210 of Industry Canada. Operation is subject to the to the OFF position and remove the second key. following conditions: 3. Insert a blank Sentry Key into the ignition and switch 1. This device may n
Summary of the content on the page No. 13
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 IGNITION AND STEERING LOCK — IF EQUIPPED DOOR KEY The same key used to start the vehicle is also used to Manual Transmissions unlock the doors. To unlock the vehicle doors, insert the Depress and hold the release button located between the key into the lock and turn. 2 ignition switch and the instrument panel. Turn the igni- tion key to LOCK and remove the key. To lock the doors, insert the key and turn. DOOR LOCKS Power Door Locks WARNING! For pers
Summary of the content on the page No. 14
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! When leaving the vehicle always remove the key fromtheignitionlock,andlockyourvehicle.Donot leave children unattended in the vehicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause severe personal inju- ries and death. NOTE: Vehicles equipped with remote keyless entry do not have a passenger side door lock cylinder. Power Door Lock Switch Location Vehicles equipped with power door locks can be locked
Summary of the content on the page No. 15
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Automatic Door Locks 4. Within 15 seconds cycle the key from the OFF position If this feature is enabled, your door locks will lock to the ON position four times; ending in the OFF position automatically when the vehicle’s speed exceeds 15 mph. ( Do not start the engine ). 2 This feature is enabled when your vehicle is shipped 5. Within 30 seconds, press the driver’s door lock switch from the assembly plant and can be disabled by using the in the LO
Summary of the content on the page No. 16
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE REMOTE KEYLESS ENTRY — IF EQUIPPED To unlock the doors: Press and release the UNLOCK button on the key fob once to unlock only the driver’s door or twice to unlock all the doors. When the UNLOCK button is pressed, the illuminated entry will initiate, the parking lights will flash on twice and if installed, the cargo lamp will turn on for 30 seconds. The system can be programmed to unlock all the doors or drivers door only upon the first UNLOCK butto
Summary of the content on the page No. 17
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 5. This will enable you to unlock all doors on the first 3. Continue to hold the LOCK button, wait at least 4 press of the UNLOCK button. seconds, but no longer than 10 seconds, then press and hold the PANIC button. Release both buttons at the same To lock the doors: time. 2 Press and release the LOCK button on the transmitter to lock all doors. If the ignition is OFF, when the doors are 4. To reactivate this feature, repeat the above steps. locked,
Summary of the content on the page No. 18
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. To reactivate this feature, repeat the above steps. General Information This device complies with part 15 of FCC rules and with Using the Panic Alarm RS-210 of Industry Canada. Operation is subject to the To activate the Panic mode while the ignition is OFF press following conditions: and release the PANIC button on the transmitter once. When the Panic mode is activated, the interior lights will 1. This device may not cause harmful interference.
Summary of the content on the page No. 19
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 2. Closeness to a radio transmitter such as a radio station NOTE: Do not touch the battery terminals that are on tower, airport transmitter, and some mobile or CB radios. the back housing or the printed circuit board. Transmitter Battery Service 1. With transmitter buttons facing down, use a flat blade 2 or dime to pry the two halves of the transmitter apart. Make sure not to damage the rubber gasket during removal. 2. Remove and replace the batteri
Summary of the content on the page No. 20
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SECURITYALARM SYSTEM — IF EQUIPPED To Set the Alarm: This system monitors the vehicle doors and ignition for The alarm will set when you use the power door locks, or unauthorized operation. When the alarm is activated, the use the Keyless Entry transmitter to lock the doors. After system provides both audible and visual signals. For the all the doors are locked and closed the SECURITY light in first 3 minutes the horn will sound and the headlights t
