Grizzly Portable Clamping Workbench G8586 user manual

Summary of the content on the page No. 1

MODEL G8586
PORTABLE CLAMPING
WORKBENCH
INSTRUCTIONS
Introduction Assembly
This workbench features four adjustable clamping
1.. Attach the crossbars to the leg braces with (8)
dogs for securing flat work, independently adjust-
M6-1 x 40 Phillips head screws, hex nuts and
able hand screws for irregular clamping, and fold-
(16) 6mm flat washers, as show in Figure 2.
ing capability for convenient storage.
Specifications
Weight ......................................................18 lbs.
1
Di

Summary of the content on the page No. 2

4.. install the other table bracket on the opposite 7.. install the rubber feet on the legs (Figure 4) end of the table top in a similar manner. so the longest side of each foot is at the cor- ner. 5. Repeat Steps 2-4 to secure the table brack- ets to the bottom of the rear table top. 8.. install the clamping dogs (Figure 4) in the holes on the table tops, as required, to hold 6.. Place the table assembly onto the leg braces, your workpiece. align the mounting holes, then secure with (4) M8