Harbor Freight Tools 41782 user manual

Summary of the content on the page No. 1

Deluxe 12V Trailer Light Kit
41782
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
To prevent serious injury, read and understand all warnings and instructions before use.
®
Copyright © 2006 by Harbor Freight Tools . All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced

Summary of the content on the page No. 2

Specifications Corrosion Resistant Housing (2) Class A Included Combination Stop, Tail, Turn Signals, SideLe amp Type 12V Automotive typ Components Markers and License Plate Bracket 20 Ft. Split Y type Wiring Harness PC ower Required 12 VD 4' Color Coded Trunk Harness Dd .O.T.Dt epartment of Transportation ApproveN. et Weigh 3 Lbs Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram.

Summary of the content on the page No. 3

Personal Safety 1. Stay alert. Watch what you are doing, and use common sense when operating an automotive accessory. Do not use an automotive accessory while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating an automotive accessory may result in serious personal injury. 2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or lon

Summary of the content on the page No. 4

Specific Safety Rules 1. Maintain labels and nameplates on the Trailer Lights. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 2. Always wear safety impact eye goggles and heavy work gloves when working on or around lead-acid batteries. Wear long sleeve shirt, long pants and work shoes. Using personal safety devices reduce the risk for injury. Safety impact eye goggles and heavy work gloves are available from Harbor Freight Tools. 3.

Summary of the content on the page No. 5

Unpacking When unpacking, check to make sure that the product includes the following: (2) Combination Class A Stop-Tail-Turn lights and License Plate Bracket (2) Side Marker Clearance Lights 23 Ft. Split Y-style Wiring Harness 4 Ft. Color Coded Trunk Harness If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Installation Warning: Before Installation, disconnect positive battery cable of the vehicle. Warning: Whenever drilling, be sure

Summary of the content on the page No. 6

Trailer Light Mounting and Connection: 1. Attach the License Plate Bracket to the left rear of the trailer. 2. Attach one Stop-Turn-Tail light to the license plate bracket onto the left rear of the trailer. 3. Attach the other Stop-Turn-Tail light to the right rear of the trailer. 4. Use the Metal Frame Clips included in the hardware package to attach each half of the Split Y-Style wiring harness down each side of the trailer. Run the YELLOW and BROWN wires down the left side and the GREEN and B

Summary of the content on the page No. 7

5. Replace the lens being careful to reposition the seal properly. The seal prevents water intrusion and consequent damage to the bulb, bulb socket or wiring. 6. Replace the screws and tighten hand tight. Be careful not to overtighten, as this might damage the seal or crack the lens. 7. Test the light to be sure it is working. Care and Troubleshooting of your Trailer Lights 1. The lens of the trailer lamps must be kept clean. The lamps should be handled with care to prevent breakage. Light bulb

Summary of the content on the page No. 8

Wiring Diagram SKU 41782 For technical questions, please call 1-800-444-3353 Page 8