Raritan Computer SwitchMan USB-Combo SW2 user manual

Summary of the content on the page No. 1

III.­ Installation
­
Important: Before beginning installation, power OFF all devices and ensure that all devices are properly grounded. Failure to do so may result in dam-
­ age to computers and/or to the SwitchMan unit. Note: Avoid placing cables near machines such as fluorescent lighting, air conditioning equipment,
etc, that create electrical noise. For USB computers: USB signals are the strongest when transmitted up to 15 feet (4.5m) between the KVM and the
CPU. Beyond 15 feet (4.5m), pro

Summary of the content on the page No. 2

IV.­ Selecting­ Ports:­ Hot­ Key­ Mode Selecting­ Ports Selecting­ USB­ Hub­ Devices­ and­ SCROLL LOCK + SCROLL LOCK + Z + 2: Sets (minus) + F3 to enter the emulation mode. Then + '-' (minus) + F10. ON: To change the port to which Audio is con- Connected­ Computers scan rate of 6 seconds for each active port. press the following keys or key combinations for nected, continue to hold the PC Push Button, There are two methods of selecting ports using performing specific SUN keyboard functions.