Dakota Alert Inc.DCHT-2500 user manual

Summary of the content on the page No. 1

DCHT-2500
Wireless
Rubber Hose
Transmitter
Owner’s Manual

Summary of the content on the page No. 2

Warnings This device complies with Part 15 of the FCC rules, Operation of this device is subject to the following conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference, including interference that may cause undesired operation. Installation: The DCHT-2500 transmitter consists of a transmitter box and 25 feet of hose. To install, connect the hose to the stem on the transmitter box, then lay the hose across the driveway. Mount the transmitt

Summary of the content on the page No. 3

Operation: (Always test unit prior to installation) The control box is powered by one 9-volt battery. Coding the transmitter: Note: The transmitters and receivers are preset at the factory. DO NOT change settings, unless changing the tune or experiencing false signals. 1. Open the transmitter box. The first thing you will see is the air switch (Figure 2). Directly below the air switch 3+ is the transmitter’s radio (Figure 3). feet 2. Locate the dip switches on the radio (2)(3). 3. Switches

Summary of the content on the page No. 4

1 3 2 figure 2 figure 3 4. { {

Summary of the content on the page No. 5

Table to select tones: Note: If more than one transmitter is Switch 9 Switch 10 Channel Tune used with the receiver, the first eight dip On On 1 Classical switches of all transmitters must match the eight dip switches of the receiver. Off On 2 Westminster On Off 3 Ding Dong Note: Whenever a change is made to any Off Off 4 Whistle jumper or the dip switches, the receiver must be turned OFF and then back ON to operate properly. Coding the receiver: 1. Open the receiver case by inserting a

Summary of the content on the page No. 6

Troubleshooting the DCHT-2500 If the transmitter is not detecting, try one of these: • C hange the ba tt er y in the tr ansmitt er . • M ak e sur e the tr ansmitt er and r ec eiv er ar e c o ded alik e . • M o v e the tr ansmitt er closer t o the r ec eiv er . • Keep the tr ansmitt er a w a y fr om lar ge metal objec ts tha t ma y in t er f er e with the r adio signal. • A djust the scr ew on the air swit ch in the tr ansmitt er (F igur e 2) (1) b y tur ning it clo

Summary of the content on the page No. 7

TECHNICAL SUPPORT If you encounter any difficulty in the operation of this product after reading the manual, please contact us. You can reach us by phone at 605-356-2772 from 8:30 AM to 5:00 PM Monday through Friday (Central Standard Time). We will be happy to answer your questions and help you in any way we can. Dakota Alert warrants this product to be free of defects in material and workmanship for a period of one year from the date of purchase. This warranty does not cover damage resulti

Summary of the content on the page No. 8

Dakota Alert, Inc. 32556 E. Main St. P0 Box 130 Elk Point, SD 57025 Phone: (605) 356-2772 Fax: (605) 356-3662 Web: www.dakotaalert.com 8.