Miller Electric Renegade 180 user manual

User manual for the device Miller Electric Renegade 180

Device: Miller Electric Renegade 180
Category: Welding System
Manufacturer: Miller Electric
Size: 2.59 MB
Added : 5/31/2014
Number of pages: 64
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Miller Electric Renegade 180. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Miller Electric Renegade 180.

For your convenience

If looking through the Miller Electric Renegade 180 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Miller Electric Renegade 180 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Miller Electric Renegade 180 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Miller Electric Renegade 180 User manual - Online PDF
Advertisement
« Page 1 of 64 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Miller Electric Renegade 180 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Miller Electric Renegade 180. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

OM-228 042B 2007 −09
Processes Processes
MIG (GMAW) Welding
Flux Cored (FCAW) Welding
Description
Engine Driven Welding Power Source/
Wire Feeder/Generator

Renegade 180
File: Engine Drive
Visit our website at
www.MillerWelds.com

Summary of the content on the page No. 2

From Miller to You Thank you and congratulations on choosing Miller. Now you can get the job done and get it done right. We know you don’t have time to do it any other way. That’s why when Niels Miller first started building arc welders in 1929, he made sure his products offered long-lasting value and superior quality. Like you, his customers couldn’t afford anything less. Miller products had to be more than the best they could be. They had to be the best you could buy. Today, the people that bu

Summary of the content on the page No. 3

TABLE OF CONTENTS SECTION 1 − SAFETY PRECAUTIONS − READ BEFORE USING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-1. Symbol Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-2. Arc Welding Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-3. Engine Hazards . . . . . . . . . . . .

Summary of the content on the page No. 4

TABLE OF CONTENTS SECTION 8 − MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 8-1. Power Source Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 8-2. Gun Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 8-3. Welding Power Source O

Summary of the content on the page No. 5

SECTION 1 − SAFETY PRECAUTIONS − READ BEFORE USING rom_2007 −04 Protect yourself and others from injury — read and follow these precautions. 1-1. Symbol Usage DANGER! − Indicates a hazardous situation which, if  Indicates special instructions. not avoided, will result in death or serious injury. The possible hazards are shown in the adjoining symbols or explained in the text. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. The possible This group

Summary of the content on the page No. 6

 Do not weld on closed containers such as tanks, drums, or pipes, FUMES AND GASES can be hazardous. unless they are properly prepared according to AWS F4.1 (see Safety Standards). Welding produces fumes and gases. Breathing these  Do not weld where the atmosphere may contain flammable dust, fumes and gases can be hazardous to your health. gas, or liquid vapors (such as gasoline).  Keep your head out of the fumes. Do not breathe the fumes.  Connect work cable to the work as close to the weldi

Summary of the content on the page No. 7

1-3. Engine Hazards STEAM AND HOT COOLANT can burn. BATTERY EXPLOSION can BLIND.  If possible, check coolant level when engine is  Always wear a face shield, rubber gloves, and cold to avoid scalding. protective clothing when working on a battery.  Always check coolant level at overflow tank, if  Stop engine before disconnecting or connect- present on unit, instead of radiator (unless told ing battery cables or servicing battery. otherwise in maintenance section or engine  Do not allow tool

Summary of the content on the page No. 8

HOT METAL from air arc cutting and READ INSTRUCTIONS. gouging can cause fire or explosion.  Read Owner’s Manual before using or servic-  Do not cut or gouge near flammables. ing unit.  Watch for fire; keep extinguisher nearby.  Stop engine and release air pressure before servicing.  Use only genuine replacement parts from the HOT PARTS can cause burns and injury. manufacturer.  Do not touch hot compressor or air system parts.  Let system cool down before touching or ser- vicing. 1-5. Addi

Summary of the content on the page No. 9

H.F. RADIATION can cause interference. ARC WELDING can cause interference.  High-frequency (H.F.) can interfere with radio  Electromagnetic energy can interfere with navigation, safety services, computers, and sensitive electronic equipment such as micro- communications equipment. processors, computers, and computer-driven equipment such as robots.  Have only qualified persons familiar with electronic equipment perform this installation.  Be sure all equipment in the welding area is electrom

Summary of the content on the page No. 10

SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT UTILISATION rom_2007 −04fre Se protéger, ainsi que toute autre personne travaillant sur les lieux, contre les étincelles et le métal chaud. 2-1. Signification des symboles DANGER! − Indique une situation dangereuse qui si on  Indique des instructions spécifiques. l’évite pas peut donner la mort ou des blessures graves. Les dangers possibles sont montrés par les symboles joints ou sont expliqués dans le texte. Indique une situation dangereuse qui s

Summary of the content on the page No. 11

Une tension DC importante subsiste à l’intérieur LES RAYONS DE L’ARC peuvent pro des onduleurs après avoir coupé l’alimentation. voquer des brûlures dans les yeux e  Couper l’alimentation du poste et décharger les condensateurs sur la peau. d’entrée comme indiqué dans la Section Maintenance avant de Le rayonnement de l’arc du procédé de soudage toucher des composants. génère des rayons visibles et invisibles intense (ultraviolets et infrarouges) susceptibles de provoquer des brûlure DES PIÈCES

Summary of the content on the page No. 12

 Suivre les recommandations dans OSHA 1910.252(a)(2)(iv) et  Protéger les bouteilles de gaz comprimé d’une chaleur excessive, NFPA 51B pour les travaux à chaud et avoir de la surveillance et un des chocs mécaniques, des dommages physiques, du laitier, des extincteur à proximité. flammes ouvertes, des étincelles et des arcs.  Placer les bouteilles debout en les fixant dans un support station- LE BRUIT peut affecter l’ouïe. naire ou dans un porte-bouteilles pour les empêcher de tomber ou de se

Summary of the content on the page No. 13

 Dévisser le bouchon légèrement et laisser la vapeur s’échapper LA CHALEUR DU MOTEUR peut pro- avant d’enlever le bouchon. voquer un incendie. L’utilisation d’un groupe autonome  Ne pas placer l’appareil sur, au-dessus ou à à l’intérieur PEUT VOUS TUER EN proximité de surfaces inflammables. QUELQUES MINUTES.  Tenir à distance les produits inflammables de l’échappement.  Les fumées d’un groupe autonome contient du monoxyde de carbone. C’est un poison invisi- ble et inodore. LES ÉTINCELLES À L

Summary of the content on the page No. 14

UNE REMORQUE QUI BASCULE peut LE SURCHAUFFEMENT peut endom- entraîner des blessures. mager le moteur électrique.  Utiliser les supports de la remorque ou des  Arrêter ou déconnecter l’équipement avant de blocs pour soutenir le poids. démarrer ou d’arrêter le moteur.  Installer convenablement le poste sur la remor-  Ne pas laisser tourner le moteur trop lentement sous risque d’en- que comme indiqué dans le manuel s’y rappor- dommager le moteur électrique à cause d’une tension et d’une fré- ta

Summary of the content on the page No. 15

2-6. Proposition californienne 65 Avertissements Pour les moteurs à essence : Les équipements de soudage et de coupage produisent des fumées et des gaz qui contiennent des produits chimiques Les gaz d’échappement des moteurs contiennent des pro- dont l’État de Californie reconnaît qu’ils provoquent des mal- duits chimiques dont l’État de Californie reconnaît qu’ils formations congénitales et, dans certains cas, des cancers. provoquent des cancers et des malformations congénitales (Code de santé

Summary of the content on the page No. 16

 Complete Parts List available at www. MillerWelds.com SECTION 3 − DEFINITIONS 3-1. Symbol Definitions Read Operator’s Engine Choke Amperes Volts Manual A V Engine Oil Fuel Circuit Protector Engine Alternating Current Positive Negative Output (AC) Direct Current Protective Earth Hours Time (DC) (Ground) h Single-Phase 230 Off Temperature Input Input Volt Power GMAW Gun Shielding Gas Wire Speed Over Temperature Trigger Input Spool Gun SECTION 4 − SPECIFICATIONS 4-1. Description This unit is an e

Summary of the content on the page No. 17

 Complete Parts List available at www. MillerWelds.com 4-3. Gun Specifications Air-Cooled Welding Guns For GMAW And FCAW Welding  Using gasless flux cored wire reduces gun duty cycle. M-15 Feeds .023 To .045 in. (0.6 To 1.1 mm) Hard Or Flux Cored Wires .045 in. (1.1 mm) wire requires liner change to MILLER Part No. 194012 in addition to contact tip change Duty Cycle Rating: 100%: 150 A With CO Shielding Gas; 120 A With Mixed Gases 2 60%: 200 A With CO Shielding Gas; 150 A With Mixed Gases 2 We

Summary of the content on the page No. 18

 Complete Parts List available at www. MillerWelds.com 4-6. Fuel Consumption 1.00 0.80 0.60 0.40 0.20 0.00 01 23 45 6 Auxiliary Power Kw At 100% Duty Cycle 233 244 4-7. Power Source Duty Cycle Duty cycle is the percentage of 10 minutes that unit can weld at rated load without overheating. NOTICE − Exceeding duty cycle 300 can damage unit and void warranty. 250 200 150 135 105 80 60 50 10 15 20 25 30 40 50 60 70 80 100 % Duty Cycle 30% duty cycle at 135 amps, 60 Hz 20% duty cycle at 130 amps, 50

Summary of the content on the page No. 19

 Complete Parts List available at www. MillerWelds.com 4-8. Gun Duty Cycle And Overheating See Section 4-3. Specifications for amperage rating and duty cycle. Duty Cycle is percentage of 10 minutes that unit can weld at rated 60%dutycycle 100%dutycycle load without overheating. NOTICE − Exceeding duty cycle can damage unit and void warranty. 6 Minutes Welding 4 Minutes Resting Continuous Welding Overheating 0 A or V 15 OR Reduce Duty Cycle Minutes sduty1 5/95 4-9. Generator Power Curve The ac g

Summary of the content on the page No. 20

 Complete Parts List available at www. MillerWelds.com SECTION 5 − INSTALLATION 5-1. Installing Welding Generator Airflow Clearance Movement 18 in 18 in (460 mm) (460 mm) 18 in (460 mm)  Shown with standard running gear and optional cylinder rack. 18 in 18 in (460 mm) (460 mm) Location Do not install unit where air flow is restricted or engine may overheat. Always securely fasten welding generator onto transport vehicle or trailer and comply with all DOT and other applicable codes. Always grou


Alternative user manuals
# User manual Category Download
1 Miller Electric 152 User manual Welding System 51
2 Miller Electric 251 NT User manual Welding System 39
3 Miller Electric 3000-4AH User manual Welding System 3
4 Miller Electric 250 DX User manual Welding System 193
5 Miller Electric 185 DX User manual Welding System 49
6 Miller Electric 175 User manual Welding System 7
7 Miller Electric 350MPa User manual Welding System 5
8 Miller Electric 185 User manual Welding System 8
9 Miller Electric 3000 User manual Welding System 7
10 Miller Electric 400P, 500 X User manual Welding System 38
11 Miller Electric 301 G User manual Welding System 4
12 Miller Electric 280 NT User manual Welding System 6
13 Miller Electric 350 LX User manual Welding System 84
14 Miller Electric 301 G, DC User manual Welding System 7
15 Miller Electric 750MPa User manual Welding System 2
16 Sony 6 User manual Welding System 0
17 ADTRAN NT1 T400 User manual Welding System 1
18 AEG 2000 User manual Welding System 2
19 AEG PV 2000 User manual Welding System 8
20 Agilent Technologies AC Power Solutions 6814B User manual Welding System 8