Summary of the content on the page No. 1
Owner’s Manual
Summary of the content on the page No. 2
Thank you for your purchase of the Supa-Charger! The Supa-Charger is a High Performance Pedal Power Supply that will power any battery operated effect devices that require 9, 12 or 16 volts. Features Include: • Eight isolated, regulated and filtered outputs • Toroidal transformer with selectable AC input voltage (120V-240V) • Fuse Protected • Hum-Free operation • 5 Year warranty We recommend reading this manual to familiarize yourself with all of the features of the Supa-Charger before using. Sh
Summary of the content on the page No. 3
Contents Check List: • Supa-Charger (1) • 2.1 mm Angled to Straight “black” barreled power cable (8) (Boss type) • 2.5 mm Angled to 2.1mm Straight “red” barreled reverse polar- ity power cable (2) (Line 6 type) Angled end into effect unit only. • IEC Power cable (1) • Supa-Charger Owner’s Manual (1) • Warranty Card If any of these items are found to be damaged or missing, please contact the dealer from which the unit was purchased. Other Available Accessories (packs of two): • 2.1 mm “green” b
Summary of the content on the page No. 4
Getting Started 1.Input Voltage Selector – 2.AC Power Inlet (IEC con- The Supa-Charger can nector) – Please plug the handle voltages between IEC connector to the 120V(US)-240V(Europe). Supa-Charger securely For the safety of you and before plugging into a your equipment please power source. select the proper voltage 3.Fuse – Should the Supa- before plugging the Supa- Charger experience a Charger’s inlet into any short, the Supa-Charger’s AC outlet. 1 2 3 2
Summary of the content on the page No. 5
Getting Started (Continued) 1/2 amp Slo-blow fuse will 5.DC Output jacks 1-8: trip before any damage Outputs 1-4, 7 & 8 provide will occur to your equip- = 9volts/12volts* ment. Only replace with Outputs 5&6 provide = another compatible 1/2 9volts/16 volts* amp Slo-blow fuse. *Please refer to page 4 for 4.LED Power Indicator – detailed description of Output When Blue LED is illumi- Voltage Selection functions nated the Supa-Charger is operating. 4 5 3
Summary of the content on the page No. 6
Getting Started (Continued) 6.Output Voltage Selection • In the down position: outputs 1–8 will deliver 9 DIP Switches- The DIP Volts switches dictate the amount of voltage that is • In the up position: supplied to its coordinat- outputs 1–4 and 7–8 will ing output. deliver 12 Volts while out- puts 5–6 delivers 16 Volts. 6 4
Summary of the content on the page No. 7
Dip Switch Compatibility List Below are some of the more common compatibility settings: • For Boss effect units that require a PSA power supply please position the Dip Switch DOWN. • For Boss effect units that require a ACA power supply please position the Dip Switch UP. • For Line 6 effect units such as: DL4, DM4, FM4 and MM4 please use Outputs 5 and 6, position the Dip Switch UP and only use Red 2.1-2.5 barrel cables. 5
Summary of the content on the page No. 8
Service There are no user serviceable parts inside. Should the Supa-Charger require service please contact our Service Department for a Return Authorization at: BBE Sound, Inc. 800-233-8346 Ext.116 For service outside of North America please contact your local distributor. For a listing of BBE Distributors log on to: http://www.bbesound.com/distributors/dist.asp 6
Summary of the content on the page No. 9
Technical Specifications Input: ––––––––––––––––––––120v-240v 50/60Hz Outputs: ––––––––––––––––––––Six 9VDC 100mA regulated (1-4 & 7-8) Two 9VDC 200mA regulated (5-6) Fuse Protected:––––––––––––––Yes Dimensions: ––––––––––––––––6" (W) x 3.5" (D) x 1.6" (H) Shipping Weight: ––––––––––––2 lbs. Note: Due to continuing product improvement, specifications and design are subject to change without notice. 7
Summary of the content on the page No. 10
Warranty Warranty registration of the unit to BBE Sound, remainder of the original 5 Year factory warranty. Inc. is not necessary. It is strongly recommended This warranty will be consider null and void by that you retain a copy of the bill of sale for future BBE Sound, Inc. if any of the following is found: reference. 1. The equipment has been physically damaged. IT IS THE SOLE RESPONSIBILITY OF THE END USER 2. The equipment shows signs of abuse. TO PROVIDE THE BILL OF SALE OR OTHER MEANS 3. Th
Summary of the content on the page No. 11
Important Safeguards For your protection, please read these safety instructions com- pletely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance and described in the operating instructions sup- plied with the appliance. IIN NS ST TA AL LL LA AT TIIO ON N cle holds the power cord plug firmly and securely. If the sold with the product. Any mounting of the product should W Wa at te er r a an nd d M
Summary of the content on the page No. 12
5381 Production Drive Huntington Beach, CA 92649 714-897-6766 • FAX 714-896-0736 bbesound.com BBE is the registered trademark of BBE Sound, Inc. rev.1 7-07
