Summary of the content on the page No. 1
INVENTORY OF CONTENTS
1. Wireless Weather Station
2. Thermo/hygro transmitter (TX29UD-TH-IT)
3. Instruction manual
Weather Station
Model WS-9057U
FEATURES:
The Weather Station
Instruction Manual
This product offers:
INSTANT TRANSMISSION is the state-of-
the-art new wireless transmission Wall Mount
technology, exclusively designed and
developed by LA CROSSE
TECHNOLOGY. INSTANT
LCD
TRANSMISSION offers you an Display
Battery
immediate update (every 4 seconds
Summary of the content on the page No. 2
SETUP should not be more than 300 feet to ensure sufficient 915 MHz transmission. (see notes on “Positioning” and “915 MHz WHEN ONE TRANSMITTER IS USED Reception”). 1. First, insert the batteries in the transmitter (see “How to install and replace batteries in the Thermo-hygro outdoor transmitter” on Note: In the event of changing batteries of the units, ensure the batteries page 11). do not spring free from the contacts. Always wait at least 1 minute after 2. Within 2 minutes of
Summary of the content on the page No. 3
When the weather station is receiving the WWVB time signal, the received and stored by the Weather Station in the first 3 minutes of power outdoor transmitter data signal will temporarily not be received by being supplied to the transmitter. the weather station. During this short period of time, the outdoor TO INSTALL AND REPLACE BATTERIES IN THE WEATHER readings shown on the weather station will not be renewed until the STATION WWVB time signal is successfully received. The Weat
Summary of the content on the page No. 4
will sound for every second. It is possible that your wireless weather hour display, manual time setting, calendar, temperature °F/°C, station may not be exactly on the second due to the variance in the pressure hPa/inHg, relative pressure value, and weather icon quartz. However, the clock will adjust the quartz timing over the course of sensitivity setting several days to be very accurate; under 0.10 seconds per day. Reset all MIN/MAX records Stop the alarm during alarm ringing FUN
Summary of the content on the page No. 5
* When the signal is successfully received by the Weather Station, the Note: SET mode is entered by pressing and holding the SET key for 3 outdoor transmission icon will be switched on. If not successful, the seconds. If you do not press any keys for 15 seconds while in SET icon will not be shown on LCD. The user can then easily see whether the mode, the Weather Station switches out of SET mode. last reception was successful (icon on) or not (icon off). A short blinking of LCD CONTRAST S
Summary of the content on the page No. 6
12/24-HOUR FORMAT SETTING: 1. The hour digit will start flashing. 2. Use the OUT/+ key to set the hour. 3. Press again the SET key to set the minutes. The minute digits start Flashing flashing. 4. Use the OUT/+ key to set the minutes. The hour display can be selected to show hours in 12-hour or 24-hour 5. Confirm with the SET key and enter the Calendar setting. settings. (Default 12-Hour) Note: If the WWVB reception function is set to "ON", the unit will still try to 1. Use
Summary of the content on the page No. 7
2. Confirm with the SET key and enter the Relative air pressure WEATHER FORECASTING ICON SENSITIVITY SETTING: value setting. For locations with rapid changes of weather conditions, the weather icons Note: sensitivity can be set to a different level for faster display of weather Units of weather icon sensitivity and air pressure history are not affected. conditions. They are always expressed in hPa. RELATIVE AIR PRESSURE VALUE SETTING The default relative pressure value is 29.9
Summary of the content on the page No. 8
THE COMFORT LEVEL INDICATOR: Comfortable : A happy face icon “ ” indicating a temperature level between 68*F and 78.6 *F (20°C and 25.9°C) Large Small First Small Large New Moon and relative humidity reading between 45% and Waxing Waxing Waxing Quarter Waxing 65%. Crescent Gibbous Crescent Gibbous Uncomfortable : A sad face icon “ ” indicating any value outside the comfortable range. TOGGLING AND RESETTING THE INDOOR READINGS: Last Small Large Small Large
Summary of the content on the page No. 9
If the Weather station is moved to another location significantly higher or Note: Once the weather tendency indicator has registered a change in air lower than its initial standing point (for example from the ground floor to pressure, it will remain permanently displayed on the LCD. the upper floors of a house), discard the weather forecast for the next 48- AIR PRESSURE HISTORY (ELECTRONIC BAROMETER WITH 60 hours. By doing this, the Weather Station will not mistake the new BAROMETRIC PRESS
Summary of the content on the page No. 10
2. Use OUT/+ key to view the MIN/MAX temperature and humidity CHECKING FOR 915MHz RECEPTION data for the selected transmitter. If the outdoor temperature and humidity data are not being received 3. To reset the minimum and maximum temperature and humidity within three minutes after setting up (or outdoor display always show “- data, and the times at which they were recorded, press the SET -. -” in the outdoor section of the Weather station during normal key continuously for about 3 sec
Summary of the content on the page No. 11
Do not submerge the units in water. Furthermore, fix all parts in 2. Clip the remote temperature transmitter onto the place where the units are adequately protected against moisture bracket. and rain. Immediately remove all low powered batteries to avoid leakage and Note: damage. Replace only with new batteries of the recommended The mounting surface can affect the transmission range. If, for instance, type. the unit is attached to a piece of metal, it may then either reduce or
Summary of the content on the page No. 12
parts or products if found to be defective during the limited warranty alterations by someone other than an authorized La Crosse Technology, period specified above. All replaced parts and products become the Ltd authorized service center; (6) units used for other than home use (7) property of La Crosse Technology, Ltd and must be returned to La applications and uses that this product was not intended or (8) the Crosse Technology, Ltd. Replacement parts and products assume the products inabi
