Summary of the content on the page No. 1
2-661-101-11 (1)
FM/MW/LW
Compact Disc Player
GB
Operating Instructions
DE
Bedienungsanleitung
FR
Mode d’emploi
IT
Istruzioni per l’uso
NL
Gebruiksaanwijzing
To cancel the demonstration (DEMO) display, see page 9.
Zum Deaktivieren der Demo-Anzeige (DEMO) schlagen Sie bitte auf Seite 10 nach.
Pour annuler la démonstration (DEMO), reportez-vous à la page 10.
Per annullare la dimostrazione (DEMO), vedere pagina 11.
Om de demonstratie (DEMO) te annuleren, zie pagina 9.
CDX-S22
© 2005 Sony Corp
Summary of the content on the page No. 2
Welcome ! Warning if your car’s ignition has no ACC position Thank you for purchasing this Sony Compact After turning the ignition off, be sure to press Disc Player. You can enjoy your drive with the and hold (OFF) on the unit until the display following functions. disappears. CD playback Otherwise, the display does not turn off and You can play CD-DA (also containing CD this causes battery drain. TEXT*), CD-R/CD-RW (MP3 files also containing Multi Session (page 11)) and ATRAC CD (AT
Summary of the content on the page No. 3
Table of Contents Getting Started Other functions Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4 Changing the sound settings . . . . . . . . . . . . . . . 9 Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4 Adjusting the sound characteristics Detaching the front panel . . . . . . . . . . . . . . . . . 4 — BAL/FAD/SUB. . . . . . . . . . . . . . . . . . . . 9 Attaching the front panel . . . . . . . . . . . . . . . 4 Customizing the equalizer curve — EQ3 .
Summary of the content on the page No. 4
Getting Started Detaching the front panel You can detach the front panel of this unit to Resetting the unit prevent theft. Before operating the unit for the first time, or Caution alarm after replacing the car battery or changing the If you turn the ignition switch to the OFF connections, you must reset the unit. position without detaching the front panel, the Detach the front panel and press the RESET caution alarm will sound for a few seconds. button with a pointed object, such as a ball
Summary of the content on the page No. 5
Location of controls and basic operations Main unit 1234 5 6 789 0 SEL SOURCE MODE ATT EQ3 SEEK DIM BTM – GROUP + REP SHUF PAUSE DSPL SENS 12 3 4 56 PTY AF/TA OFF CDX-S22 qa qsqd qf qg qhqjqk ql Refer to the pages listed for details. L DSPL (display)/DIM (dimmer) button 4, 6, 7 A Volume +/– button To change display items (press); change the To adjust volume. display brightness (press and hold). B SEL (select) button 4, 9 M SENS/BTM button 6 To select items. To improve weak reception: LOCAL/
Summary of the content on the page No. 6
CD Radio Storing and receiving stations Display items Caution AB When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically — BTM A Source B Track number/Elapsed playing time, Disc/ 1 Press (SOURCE) repeatedly until 1 artist name, Group number* , Group name, “TUNER” appears. 2 Track name, Text information* , Clock To change the band, press (MODE) repeatedly. You can select from FM1, FM2, *1 Group number is displayed only when the group
Summary of the content on the page No. 7
Setting AF and TA/TP RDS 1 Press (AF/TA) repeatedly until the desired setting appears. Overview FM stations with Radio Data System (RDS) Select To service send inaudible digital information along AF-ON activate AF and deactivate TA. with the regular radio programme signal. TA-ON activate TA and deactivate AF. Display items AF, TA-ON activate both AF and TA. AB C AF, TA-OFF deactivate both AF and TA. Storing RDS stations with the AF and TA setting A Radio band, Function You can preset RDS sta
Summary of the content on the page No. 8
Local Link function (UK only) Setting CT This function enables you to select other local stations in the area, even if they are not stored on 1 Set “CT-ON” in setup (page 9). your number buttons. Notes 1 During FM reception, press a number button The CT function may not work even though an RDS ((1) to (6)) on which a local station is stored. station is being received. There might be a difference between the time set by 2 Within 5 seconds, press again a number button the CT function and
Summary of the content on the page No. 9
With the card remote commander In step 3, to adjust the selected item, press <, M, , Other functions or m. Changing the sound settings Adjusting setup items — SET Adjusting the sound 1 Press and hold (SEL). characteristics — BAL/FAD/SUB The setup display appears. You can adjust the balance, fader, and subwoofer 2 Press (SEL) repeatedly until the volume. desired item appears. 1 Press (SEL) repeatedly until “BAL,” 3 Press the volume +/– button to select “FAD” or “SUB” appears. the setting (e
Summary of the content on the page No. 10
LIST SOUND Replacing the lithium battery Using optional equipment Under normal conditions, the battery will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.) Card remote commander RM-X114 When the battery becomes weak, the range of the card remote commander becomes shorter. Location of controls Replace the battery with a new CR2025 lithium The corresponding buttons on the card remote battery. Use of any other battery may present a commander
Summary of the content on the page No. 11
Before playing, clean the discs Additional Information with a commercially available cleaning cloth. Wipe each disc from the centre out. Do not use Precautions solvents such as benzine, thinner, commercially available If your car has been parked in direct sunlight, cleaners, or antistatic spray allow the unit to cool off before operating it. intended for analogue discs. Power aerial will extend automatically while the unit is operating. Notes on CD-R/CD-RW discs Some CD-Rs/CD-RW
Summary of the content on the page No. 12
Note Playback order of MP3 files Be sure to create the ATRAC CD using authorized Folder software, such as SonicStage 2.0 or later, or MP3 (group) SonicStage Simple Burner 1.0 or 1.1. MP3 file If you have any questions or problems concerning (track) your unit that are not covered in this manual, consult your nearest Sony dealer. Maintenance Fuse replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the Notes original fuse. If the fuse blows, Be
Summary of the content on the page No. 13
Removing the unit Specifications 1 Remove the protection collar. CD Player section Signal-to-noise ratio: 120 dB 1Detach the front panel (page 4). Frequency response: 10 – 20,000 Hz 2Engage the release keys together with the Wow and flutter: Below measurable limit protection collar. Tuner section FM Tuning range: 87.5 – 108.0 MHz Aerial terminal: External aerial connector Intermediate frequency: 10.7 MHz/450 kHz Usable sensitivity: 9 dBf Selectivity: 75 dB at 400 kHz Orient the release Signal-
Summary of the content on the page No. 14
The display disappears from/does not appear US and foreign patents licensed from Dolby in the display window. Laboratories. The dimmer is set “DIM-ON”(page 9). The display disappears if you press and hold (OFF). MPEG Layer-3 audio coding technology and t Press and hold (OFF) on the unit until the patents licensed from Fraunhofer IIS and Thomson. display appears. The connectors are dirty (page 12). Design and specifications are subject to change without notice. CD playback The disc cann
Summary of the content on the page No. 15
Preset tuning is not possible. NO AF Store the correct frequency in the memory. There is no alternative frequency for the current The broadcast signal is too weak. station. t Press (SEEK) +/– while the station name is Automatic tuning is not possible. flashing. The unit starts searching for another Setting of the local seek mode is not correct. frequency with the same PI (Programme t Tuning stops too frequently: Identification) data (“PI SEEK” appears). Press (SENS) until “LOCAL-ON” a
Summary of the content on the page No. 16
Wichtig! Warnhinweis, wenn die Zündung Ihres Bitte nehmen Sie sich etwas Zeit, um Fahrzeugs nicht über eine den Geräte-Pass vollständig Zubehörposition (ACC oder I) verfügt Nachdem Sie die Zündung ausgeschaltet auszufüllen. Dieser befindet sich auf haben, halten Sie am Gerät unbedingt (OFF) der hinteren Umschlagseite dieser gedrückt, bis die Anzeige ausgeblendet wird. Bedienungsanleitung. Andernfalls wird die Anzeige nicht ausgeschaltet und der Autobatterie wird Strom entzogen. Willkomm
Summary of the content on the page No. 17
Inhalt Vorbereitungen Weitere Funktionen Zurücksetzen des Geräts . . . . . . . . . . . . . . . . . . 4 Wechseln der Klangeinstellungen . . . . . . . . . . 9 Einstellen der Uhr . . . . . . . . . . . . . . . . . . . . . . . 4 Einstellen der Klangeigenschaften Abnehmen der Frontplatte. . . . . . . . . . . . . . . . . 4 — BAL/FAD/SUB. . . . . . . . . . . . . . . . . . . . 9 Anbringen der Frontplatte. . . . . . . . . . . . . . . 4 Individuelles Einstellen der Equalizer-Kurve — EQ3 . . . . . . . .
Summary of the content on the page No. 18
Vorbereitungen Abnehmen der Frontplatte Um zu verhindern, dass das Gerät gestohlen Zurücksetzen des Geräts wird, können Sie die Frontplatte abnehmen. Bevor Sie das Gerät zum ersten Mal benutzen Warnton oder wenn Sie die Autobatterie ausgetauscht Wenn Sie den Zündschlüssel in die Position OFF oder die Verbindungen gewechselt haben, stellen, ohne die Frontplatte abzunehmen, ertönt müssen Sie das Gerät zurücksetzen. einige Sekunden lang ein Warnton. Nehmen Sie die Frontplatte ab und drücken S
Summary of the content on the page No. 19
Lage und Funktion der Teile und Bedienelemente und Grundfunktionen Hauptgerät 1234 5 6 789 0 SEL SOURCE MODE ATT EQ3 SEEK DIM BTM – GROUP + REP SHUF PAUSE DSPL SENS 12 3 4 56 PTY AF/TA OFF CDX-S22 qa qsqd qf qg qhqjqk ql Näheres finden Sie auf den angegebenen Seiten. A Lautstärketaste +/– K Taste (Lösen der Frontplatte) 4 Einstellen der Lautstärke. L Taste DSPL (Anzeige)/DIM (Dimmer) B Taste SEL (Auswählen) 4, 9 4, 6, 7 Auswählen von Optionen. Wechseln der angezeigten Informationen (drücke
Summary of the content on the page No. 20
CD Radio Speichern und Empfangen von Informationen im Display Sendern AB Achtung Wenn Sie während der Fahrt Sender einstellen, sollten Sie die BTM-Funktion (Best Tuning Memory - Speicherbelegungsautomatik) A Tonquelle verwenden. Andernfalls besteht Unfallgefahr. B Titelnummer/Verstrichene Spieldauer, CD-/ 1 Interpretenname, Gruppennummer* , Automatisches Speichern von Gruppenname, Titelname, 2 Textinformationen* , Uhrzeit Sendern — BTM *1 Die Gruppennummer wird nur beim Wechseln der 1 Dr
