Summary of the content on the page No. 1
3-044-183-13 (1)
FM/MW/LW
Compact Disc
Player
GB
Operating Instructions
ES
Manual de instrucciones
SE
Bruksanvisning
PT
Manual de instruções
RU
Инструкция по эксплуатации
For installation and connections, see the supplied installation/connections
manual.
Para obtener información sobre la instalación y las conexiones, consulte el manual
de instalación/conexiones suministrado.
Vi hänvisar till det medföljande häftet angående montering/anslutningar.
Para a instalação e as ligações, consulte o manua
Summary of the content on the page No. 2
Welcome ! Precautions Thank you for purchasing the Sony Compact Disc Player. This unit lets you enjoy a variety of features using the following controller CLASS 1 accessories: LASER PRODUCT Optional accessories Rotary commander RM-X4S Card remote commander RM-X91 This label is located on the bottom of the chassis. In addition to the CD playback and radio operations, you can expand your system by 1 connecting optional CD/MD units* . CAUTION INVISIBLE LASER RADIATION WHEN OPEN When you operate th
Summary of the content on the page No. 3
Notes on discs Notes on CDs If you use the discs explained below, the sticky residue can cause the CD to stop spinning and A dirty or defective disc may cause sound may cause malfunction or ruin your discs. dropouts while playing. To enjoy optimum sound, handle the disc as follows. Do not use second-hand or rental CDs that Handle the disc by its edge. To keep the disc have a sticky residue on the surface (for clean, do not touch the surface. example, from peeled-off stickers or from ink, or glue
Summary of the content on the page No. 4
Table of Contents Location of controls ............................................. 5 Other Functions Labelling the rotary commander (optional) ... 21 Getting Started Using the rotary commander (optional) ......... 22 Resetting the unit ................................................. 7 Adjusting the sound characteristics ................ 23 Detaching the front panel ................................... 7 Attenuating the sound ...................................... 24 Turning the unit on/off ..
Summary of the content on the page No. 5
+ T S P R R P S T - - - + D I C S S Location of controls OPEN PTY DSPL MENU LIST D-BASS TA -SEEK/AMS SOURCE AF SOUND ENTER REP SHUF MODE 1 2 3 4 56 OFF CDX-C5000RX/C5000RV /C5000R/C4900R Refer to the pages listed for details. 1 Volume control dial 19 qf SEEK/AMS –/+ (cursor left/right) buttons 8, 10, 12, 14, 15, 16, 18, 19, 21, 23, 24 2 MENU button 8, 10, 12, 13, 14, 15, 16, Automatic Music Sensor 10, 14 18, 19, 21, 24 Manual Search 10 3 Z (eject) button (located on the front Seek 15, 16, 1
Summary of the content on the page No. 6
Location of controls Card remote commander RM-X91 (optional) The corresponding buttons of the card OPEN/CLOSE remote commander control the same OFF functions as those on this unit. 1 OFF button MENU DISC LIST 2 MENU button SEEK SEEK 3 SOURCE button SOURCE 4 SEEK/AMS buttons SOUND DISC ENTER 5 SOUND button 6 DSPL (DSPL/PTY) button DSPL MODE 7 ATT button ATT VOL 8 LIST button 9 DISC/PRST buttons q; ENTER button qa MODE button qs VOL buttons Notes • A unit turned off by pressing (OFF) for two secon
Summary of the content on the page No. 7
Attaching the front panel Place the hole A in the front panel onto the spindle B on the unit as illustrated, then push Getting Started the left side in. Resetting the unit A Before operating the unit for the first time or B after replacing the car battery, you must reset the unit. Remove the front panel and press the reset button with a pointed object, such as a ball- point pen. Reset button x Note Pressing the reset button will erase the clock setting and some memorised functions. Detaching the
Summary of the content on the page No. 8
Turning the unit on/off Setting the clock The clock uses a 24-hour digital indication. Turning on the unit Press (SOURCE) or insert a CD in the unit. For Example: To set the clock to 10:08 details on operation, refer to page 9 (CD/MD) and page 15 (radio). 1 Press (MENU), then press either side of (DISC/PRST) repeatedly until “CLOCK” Turning off the unit appears. Press (OFF) to stop CD/MD playback or radio reception (the key illumination and display remains on). Press (OFF) for two seconds to com
Summary of the content on the page No. 9
When the last track on the CD is CD Player over CD/MD Unit (optional) The track number indication returns to “1,” and playback restarts from the first track of the CD. In addition to playing a CD with this unit alone, you can also control external CD/MD To Press units. Stop playback (OFF) If you connect an optional CD unit with the Eject the CD (OPEN) then Z CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. Playing a CD or MD (with an optional CD/
Summary of the content on the page No. 10
After you select the desired item, the display Locating a specific track will automatically change to the Motion — Automatic Music Sensor (AMS) Display mode after a few seconds. In the Motion Display mode, all the items are During playback, press either side of scrolled in the display one by one in order. (SEEK/AMS) momentarily for each track you want to skip. Note If you use personalised labels, they will always take priority over the original CD TEXT information To locate To locate when such i
Summary of the content on the page No. 11
Playing tracks repeatedly Playing tracks in random — Repeat Play order — Shuffle Play The CD in the main unit will automatically You can select: repeat itself when it reaches the end. As repeat •SHUF-1 — to play the tracks on the current play, you can select: disc in random order. •REP-1 — to repeat a track. •SHUF-2 — to play the tracks in the current •REP-2 — to repeat a disc in the optional CD/ optional CD/MD unit in random order. MD unit. •SHUF-ALL — to play all the tracks in all the optional
Summary of the content on the page No. 12
Tips • To erase or correct a name, enter “_” (under-bar) Labelling a CD — Disc Memo (For for each character. • There is another way to start labelling a CD. Press a CD unit with the CUSTOM FILE function) (LIST) for two seconds instead of steps 2 and 3. You can also complete the operation by pressing You can label each disc with a personalised (LIST) for two seconds instead of step 5. name. You can enter up to 8 characters for a • You can label CDs on a unit without the CUSTOM disc. If you label
Summary of the content on the page No. 13
Erasing the disc memo Locating a disc by name 1 Press (SOURCE) repeatedly to select — List-up (For a CD unit with the CD TEXT “CD.“ function/CUSTOM FILE function, or an MD unit) 2 Press (MODE) repeatedly to select the CD unit with the CUSTOM FILE function. You can use this function for discs that have been assigned custom names or for CD TEXT discs. 3 Press (MENU), then press either side of You can locate the disc by (DISC/PRST) repeatedly until “NAME — its custom name: when you assign a name DE
Summary of the content on the page No. 14
Playing specific tracks only Selecting specific tracks You can select: •“BANK-ON” — to play the tracks with the for playback “PLAY” setting. — Bank •“BANK-INV” (Inverse) — to play the tracks with the “SKIP” setting. (For a CD unit with the custom file function) If you label the disc, you can set the unit to 1 During playback, press (MENU), then skip or play the tracks of your choice. press either side of (DISC/PRST) repeatedly until “BANK-ON”, “BANK- 1 Start playing the disc you want to label.
Summary of the content on the page No. 15
Memorising only the Radio desired stations You can preset up to 18 FM stations (6 each for FM1, FM2, and FM3), up to 6 MW stations, and up to 6 LW stations in the order of your Memorising stations choice. automatically 1 Press (SOURCE) repeatedly to select the — Best Tuning Memory (BTM) tuner. The unit selects the stations with the strongest signals and memorises them in the order of 2 Press (MODE) repeatedly to select the their frequencies. You can store up to 6 stations band. on each band (FM1
Summary of the content on the page No. 16
If FM stereo reception is poor Receiving the memorised — Monaural Mode 1 During radio reception, press (MENU), stations then press either side of (DISC/PRST) repeatedly until “MONO-OFF” appears. 1 Press (SOURCE) repeatedly to select the tuner. 2 Press the (+) side of (SEEK/AMS) until “MONO-ON“ appears. 2 Press (MODE) repeatedly to select the The sound improves, but becomes band. monaural (“ST” disappears). 3 Press the number button ((1) to (6)) on 3 Press (ENTER). which the desired station is st
Summary of the content on the page No. 17
Tip The Motion Display mode can be turned off. (See “Changing the sound and display settings” on RDS page 24.) Note “NO NAME” appears if the received station does not transmit RDS data. Overview of the RDS function Retuning the same Radio Data System (RDS) is a broadcasting service that allows FM stations to send programme automatically additional digital information along with the regular radio programme signal. Your car — Alternative Frequencies (AF) stereo offers you a variety of services. He
Summary of the content on the page No. 18
Notes Local link function • When there is no alternative station in the area (United Kingdom only) and you do not need to search for an alternative station, turn the AF function off by pressing The Local Link function lets you select other (AF) repeatedly until “AF-OFF” appears. local stations in the area, even if they are not • When “NO AF” and the station name flash stored on your number buttons. alternately, it means that the unit cannot find an alternative station in the network. • If the st
Summary of the content on the page No. 19
Notes • “NO TP” flashes for five seconds if the received Presetting the RDS station does not broadcast traffic announcements. Then, the unit starts searching stations with the AF and for a station that broadcasts it. • When “EON” appears with “TP” in the display, TA data the current station makes use of broadcast traffic announcement of other stations in the same When you preset RDS stations, the unit stores network. each station’s data as well as its frequency, so you don’t have to turn on the
Summary of the content on the page No. 20
1 Press (DSPL/PTY) during FM reception until “PTY” appears. Locating a station by programme type You can locate the station you want by selecting one of the programme types shown The current programme type name appears below. if the station is transmitting the PTY data. “- - - - -” appears if the received station is Programme types Display not an RDS station, or if the RDS data has News NEWS not been received. Current Affairs AFFAIRS Information INFO 2 Press (DISC/PRST) repeatedly until the desi
