Summary of the content on the page No. 1
Kramer Electronics, Ltd.
USER MANUAL
Model:
VP-14xl
RS-232 Port Extender
Summary of the content on the page No. 2
Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 1 3 Overview 3 4 Defining the VP-14xl RS-232 Port Extender 4 5 Connecting the VP-14xl RS-232 Port Extender 5 6 Setting the DIP-switches on the VP-14xl 6 6.1 Setting the RS-485 Bus Termination 6 6.2 Setting the ADDR DIP-switches 7 6.3 Setting the BAUD DIP-switches 7 6.4 Selecting Hardware/Software Mode 7 6.5 Hardware Mode 8 6.6 Software Mode 8 7 Technical Specifications 8 8 Serial Port Pinouts 9 9 Table of Hex
Summary of the content on the page No. 3
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models 1 now appear in 11 groups that are clearly defined by function. Congratulatio
Summary of the content on the page No. 4
Getting Started 2 KRAMER: SIMPLE CREATIVE TECHNOLOGY
Summary of the content on the page No. 5
Overview 3 Overview The unique VP-14xl RS-232 Port Extender distributes an incoming RS-232, RS-485 or USB command as transmitted by a touch screen control system, personal computer or other type of control system, to up to three RS-232 ports. This lets you control up to three compatible devices with only one serial port or RS-232 card. The VP-14xl is specifically designed for use with Kramer switchers and routers, but can be used with any other equipment which employs RS-232. In particu
Summary of the content on the page No. 6
Defining the VP-14xl RS-232 Port Extender 4 Defining the VP-14xl RS-232 Port Extender Figure 1 and Table 1 define the front and rear panels of the VP-14xl. Figure 1: VP-14xl RS-232 Port Extender Front and Rear Panels Table 1: VP-14xl RS-232 Port Extender Front and Rear Panel Features # Feature Function 1 RS-232 IN 9-pin D-sub (F) Connector Connect to source computer 1 2 RS-485 IN 3-pin Removable Terminal Connect to source computer 2. Connect G to the Ground Block connection, A to t
Summary of the content on the page No. 7
Connecting the VP-14xl RS-232 Port Extender 5 Connecting the VP-14xl RS-232 Port Extender Figure 2: Connecting the VP-14xl RS-232 Port Extender To connect your VP-14xl RS-232 Port Extender, as the example in Figure 2 1 illustrates : 1. Connect up to three computer sources to the input connectors (for example, 2 PCs and a laptop). 2. Connect up to three units to be controlled to the output connectors (for example, Kramer switches). 3. If you are using the RS-485 input, set the RS-485
Summary of the content on the page No. 8
Setting the DIP-switches on the VP-14xl 4. Set the Hardware/Software DIP-switch (see Section 6.4) as follows: In Hardware mode, set the REPLY DIP-switches to determine the unique reply output port (see Section 6 .2) In Software mode, set the machine number (see Section 6 .2). 5. Set the serial port baud rate (see Section 6 .3). 6. Select the appropriate machine number (see Section 6.2). 7. Connect the 5V DC power adapter to the 5V DC socket and to the mains electricity. Note: Ch
Summary of the content on the page No. 9
Setting the DIP-switches on the VP-14xl 6.2 Setting the ADDR DIP-switches DIP-switches 2, 3 and 4 set either the reply source (in Hardware mode Table 3) or machine number (in Software mode Table 4). Table 3: Hardware Mode Reply Source DIP-switch Setting Reply Source DIP-switch 2 3 4 Reply is taken from output 1 (default) ON OFF OFF Reply is taken from output 2 OFF ON OFF Reply is taken from output 3 OFF OFF ON Note: When there is more than one VP-14xl attached to the RS-485 bus only
Summary of the content on the page No. 10
Technical Specifications 6.5 Hardware Mode In Hardware mode, the: • RS-232 data is passed from any input to all outputs • VP-14xl routes the reply from the output port defined by the DIP-switches 2, 3 and 4 (see Section 6.2). For reliable operation, only one port should be defined 6.6 Software Mode In Software mode, the VP-14xl routes the data and reply based on the Protocol 2000 commands received from the PC or other device connected to any of the inputs (RS-232, RS-485 or USB), see
Summary of the content on the page No. 11
Serial Port Pinouts 8 Serial Port Pinouts Table 7 describes the pinouts of the 9-pin D-sub serial ports. Table 7: 9-Pin D-sub Serial Port Pinouts Pin Function 2 Receive 3 Transmit 5 Ground Note: Flow control signals are not supported. 9 Table of Hex Codes for Serial Communication (Protocol 2000) The RS-232/RS-485 Protocol 2000 uses four bytes of information as shown in Table 8. The data rate is set by the DIP-switches (see Table 5), with no parity, 8 data bits and 1 stop bit.
Summary of the content on the page No. 12
Table of Hex Codes for Serial Communication (Protocol 2000) O6…O0 – “OUTPUT”. When switching (ie. instruction codes 1 and 2), the OUTPUT (7 bits) is set as the output number which is to be switched. Similarly, if switching is done via the machine’s front-panel, then these bits are set with the OUTPUT NUMBER which was switched. For other operations, these bits are defined according to the table. th 4 BYTE: Bit 7 – Defined as 1. Bit 5 – Don’t care. OVR – Machine
Summary of the content on the page No. 13
LIMITED WARRANTY We warrant this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered by the warranty: 1. An
Summary of the content on the page No. 14
For the latest information on our products and a list of Kramer distributors visit www.kramerelectronics.com where updates to this user manual may be found. We welcome your questions, comments, and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-
