Summary of the content on the page No. 1
FMD-150W-US
INSTRUCTION MANUAL
Thank you very much for purchasing an OLYMPUS product.
Please keep this manual handy for future use.
ENGLISH
Summary of the content on the page No. 2
Contents MAIN FEATURES OF Eye-Trek......................E-2 TURNING ON THE POWER.........................E-17 ADDITIONAL INFORMATION.........................E-2 WATCHING VIDEO.......................................E-19 WARNING........................................................E-3 SELECTING THE DISPLAY MODE..............E-21 IMPORTANT SAFETY INSTRUCTIONS ADJUSTING THE AUDIO/VIDEO. ................E-23 AND REGULATORY NOTICE ........................E-7 SAVING, LOADING AND CANCELING CHECKING TH
Summary of the content on the page No. 3
WARNING Some people should not use this product: Children under 16 years of age This product may interfere with development of their eyes and visual system. Anyone who has ever experienced convulsive or epileptic fits or loss of consciousness from light flashes or oscillations. This product could cause the same symptoms for those people. Anyone who cannot see the whole image clearly, or who wears glasses that make it hard to see the whole screen clearly, or who has an eye movement disorder or vi
Summary of the content on the page No. 4
WARNING Improper use of this product may cause serious injury: Under some conditions, viewing with the Eye-Trek may cause: c Nausea c Eye pain or eye fatigue c Dizziness c Headache c Neck or shoulder pain c Feeling ill c Motion sickness c Disturbance of hand-eye coordination If you experience any of these symptoms, stop viewing and rest until you recover. These symptoms could temporarily disturb your vision or balance. Do not try to operate a vehicle, walk, or move around until you feel better.
Summary of the content on the page No. 5
WARNING To prevent electrical shock or fire with this product: Do not use this product if there is thunder or lightning. Do not touch the control unit or power cord until after the storm has passed. Beware of moisture. Do not use this product or leave it in very moist or humid places, such as in the rain, snow, fog, or a steamy bathroom. Do not use it if it has condensation inside, or if your hands are wet. Do not use it near flammable gas, liquid, or vapor. Do not expose it to very dusty enviro
Summary of the content on the page No. 6
WARNING For your safety: Do not use this product in situations that are potentially dangerous, such as on a bus or train where you may fall down, or in places where you cannot guarantee your personal safety. Using this product in such a situation may result in an unexpected accident or injury. Do not leave this product in a closed automobile or in other Prohibited places under direct sunlight for long periods. Doing so may cause the product to be deformed by heat, resulting in a malfunction and
Summary of the content on the page No. 7
IMPORTANT SAFETY INSTRUCTIONS AND REGULATORY NOTICE SAFETY NOTICE The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instr
Summary of the content on the page No. 8
SAFETY INSTRUCTIONS Read Instructions — All the safety and operating instructions should be read before the product is 1 operated. Retain Instructions — The instruction manual should be retained for future reference. 2 Heed Warnings — All warnings on the product and in the operating instructions should be adhered 3 to. Follow Instructions — All operating and use instructions should be followed. 4 Cleaning — Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
Summary of the content on the page No. 9
Damage Requiring Service — Unplug this product from the wall outlet and refer servicing to ^ qualified service personnel under the following conditions: (a) When the power-supply cord or plug is damaged, (b) If liquid has been spilled, or objects have fallen into the product, (c) If the product has been exposed to rain or water, (d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as impr
Summary of the content on the page No. 10
CHECKING THE CONTENTS Display Control Storage Instruction unit unit pouch manual AC adapter AV cable Frame adapter @ 2 or NOMENCLATURE Display Unit Frame Inner headphone Display cable holder Nose pad Connection plug Inner headphone Disconnect button Control Unit DISPLAY MODE switch POWER switch Power Jog dial indicator (Green) VOLume control Display unit connector AC adapter connector (DC IN) S-video input jack Battery pack holder Audio/video input jack Battery unloading switch E-10
Summary of the content on the page No. 11
CONNECTIONS Hold the cable of the display unit with the connection plug facing up, and insert the plug into the 1 display unit connector of the control unit. * To unplug the display cable, pull it out by pressing the disconnect buttons on both sides of the connection plug To display unit simultaneously. connector * The connection plug Display cable should face upward. Plug the AC adapter into the AC adapter (DC IN) connector of the control unit and into a power outlet. 2 AC adapter Power outlet
Summary of the content on the page No. 12
CONNECTIONS (continued) Basic Connections Video component such as a VCR, LD player, DVD player, etc. Display unit To audio/video output jacks Power outlet AV cable (provided) To display unit connector To audio/video input jack or AC adapter Control unit To AC adapter (DC IN) connector Connections Using S-Video Jack If the connected video component has an S-video output jack, clearer video can be viewed by connecting it through an S-video cable. When the S-video jack and video jack (pin jack) are
Summary of the content on the page No. 13
CONNECTIONS (continued) Connection to Mini Jacks If the connected video component uses a mini-jack, and cannot be directly connected with the AV cable, use plug adapters. To audio/video output jack Video (Yellow) Video (Yellow) Audio Left Audio Left (White) (White) AV cable Audio Right Audio Right Plug (Red) (Red) (provided) adapters Video camera, etc. E-13 ENGLISH
Summary of the content on the page No. 14
USING THE BATTERY PACK CAUTION: Do not expose to high temperatures (60°C/140°F). Do not disassemble. Do not incinerate. There is a danger of explosion if the battery is incorrectly replaced. Replace battery pack with Olympus Co., Ltd. part no. OL-BT7201A only. Use of another battery may present a risk of fire or explosion. Dispose of used battery promptly. Keep away from children. Using the Battery Pack (Optional) OL-BT7201A c Load the battery pack onto the battery pack holder on the control un
Summary of the content on the page No. 15
WEARING THE DISPLAY UNIT Remove the inner headphone from each 1 inner headphone holder by turning the headphone as shown in the figure. * First, minimize the volume level by turning the VOLume control fully clockwise. * When attaching the inner headphones to the inner headphone holders, simply reverse the order of removal for each. * If you want to replace the ear pads, purchase a pair of 16.5 mm ear pads. Wear the display unit just like 2 wearing eyeglasses and Grasp the tips of the frame arms
Summary of the content on the page No. 16
REMOVING THE DISPLAY UNIT When removing the display unit, first remove the inner headphones from your ears. If you are also wearing eyeglasses, remove the display unit by holding the left and right arms of the display unit frame with your fingers while pushing the frame arms of your eyeglasses upward with your thumbs. *1 With certain eyeglass *1 designs, the nose pad may catch the bridge of the eyeglasses and cause them to come out together with the display unit. To avoid this, remove the di
Summary of the content on the page No. 17
TURNING ON THE POWER * The password is set to “ ” at the factory. Turn the power on and select the desired 1 language. 1. Turn on the power of the connected video component. 2. Press the POWER switch on the control unit. The power indicator lights in green, then the language selection screen appears. Rotate the jog dial to select the desired language, then press it to select On-Screen Display OK. * The screen remains black until a video signal is input. If no signal is present, check the power a
Summary of the content on the page No. 18
TURNING ON THE POWER (continued) Acknowledge warning. On-Screen Display 2 1. Press the jog dial to acknowledge the WARNING:TO PREVENT warning on the screen. SERIOUS INJURY: SEE MANUAL FOR SAFETY • INFORMATION BEFORE 2.When the password entry screen USING. MAY DISTURB VISION, • appears, rotate the jog dial to select BALANCE OR HAND-EYE COORDINATION. each number ( ) and press the jog • NOT FOR USE BY CHILDREN UNDER 16. dial to select OK. The passwo
Summary of the content on the page No. 19
WATCHING VIDEO Turn the power on. 1 1. Press the POWER switch on the control unit. The power indicator lights in green and the warning appears on the screen. 2. Press the jog dial to acknowledge the warning. Display video. On-Screen Display 2 1.When the password has been registered... When the password entry screen appears, ENTER YOUR PASSWORD. rotate the jog dial to select each number ( )and press the jog dial to select OK. * When the wrong password is entered... INPUT OK If you enter the wron
Summary of the content on the page No. 20
WATCHING VIDEO (continued) Adjust the contrast. On-Screen Display 4 1. When the jog dial is rotated while a video image is being displayed, the contrast adjustment level is displayed on the screen. 2. Rotate the jog dial to adjust the contrast. CONTRAST + 10 3. Press the jog dial to return the screen to the normal view. ADJUST OK When you are finished… 5 When you are finished, remove the inner headphones before taking the display unit off*. Press the POWER switch on the control unit to turn t
