Summary of the content on the page No. 1
INSTRUCTION BOOKLET
INTEGRATED
COOKER HOOD
CH 250
Summary of the content on the page No. 2
Thank you for buying a Zanussi product. To enable you to use your appliance effectively and safely, please read this instruction book carefully before using the appliance and retain for future reference. If you require guidance in the use of the appliance or require further information on Zanussi Products, please contact our Customer Care Department. For general enquiries concerning your Zanussi appliance or for further information, visit our website at http:\\www.zanussi.co.uk Customer Care Dep
Summary of the content on the page No. 3
IMPORTANT SAFETY INFORMATION These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department. Installation Child Safety • Any installation work must be undertaken by a qualified electrician or a competent person. • This appliance is designed to be operated by adults. Children should n
Summary of the content on the page No. 4
YOUR APPLIANCE OPERATING INSTRUCTIONS This cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. To obtain the best performance it is advisable to switch on the hood a few minutes before you start cooking and leave it running for approximately 15 minutes after finishing. The cooker hood controls are located on the right hand side, in the front fascia panel above the glass visor. The Controls Fan ON/OFF/Speed Control Position 0 - Off Position 1 - Low Po
Summary of the content on the page No. 5
The appliance can be installed to recirculate or extract contaminated air. The cooker hood is more effective when used in the extraction mode. Recirculation The cooker hood is supplied specified for use in the recirculation mode with the charcoal filter fitted. In the recirculation mode contaminated air is passed through the charcoal filter to be purified and recirculated into the kitchen through a recirculation grille. Extraction In the extraction mode the contaminated air enters the cooker hoo
Summary of the content on the page No. 6
MAINTENANCE AND CLEANING Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply. The cooker hood must be kept clean, a build up of grease or fat can be a fire hazard. External Cleaning Wipe the cooker hood frequently with warm soapy water using a mild detergent. Always wear protective gloves when cleaning the hood. Never use scouring pads or abrasive cleaners. Never use excessive amounts of water when cleaning particularly around the control panel. Charcoal
Summary of the content on the page No. 7
Synthetic Paper Grease Filter The filter has saturation indicators, which are small squares made from a series of dots. When the white paper inside the squares becomes saturated with grease the coloured dots start to run and spread across the paper, indicating that the filter has reached saturation point and must be replaced. The synthetic paper grease filter cannot be cleaned. It must not be washed. To Replace the Synthetic Paper Grease Filter 1. Open the glass visor. 2. Press inwardly on the t
Summary of the content on the page No. 8
SOMETHING NOT WORKING If, having followed these instructions carefully, your cooker hood fails to work properly please carry out the following checks. Symptom Solution The cooker hood will not start • Check the hood is connected to the electricity supply. • Check that the fan speed control is set to 1, 2 or 3. The cooker hood is not working effectively • The fan speed is set high enough for the task. • The grease filter is clean. • The kitchen is adequately vented to allow the entry of fresh air
Summary of the content on the page No. 9
PEACE OF MIND FOR TWENTY FOUR MONTHS STANDARD GUARANTEE CONDITIONS We, Zanussi Ltd., undertake that if within twenty four months of the date of the purchase this Zanussi built-in appliance or any part there of is proved to be defective by reason only of faulty workmanship or materials, the company will, at our option repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electrical suppl
Summary of the content on the page No. 10
INSTALLATION INSTRUCTIONS It is dangerous to alter the specifications or attempt to modify this product in any way. Technical Information DIMENSIONS HEIGHT: 15 cm WIDTH: 60 cm DEPTH: 48 cm WEIGHT GROSS: 8,5 kg NET: 7,4 kg ELECTRICAL SUPPLY: Voltage (50Hz) 220-240 V POWER CONSUMPTION: 190 W FAN MOTOR: 110 W LAMP: 2 x 40 80 W SUITABLE FOR INSTALLATION ABOVE: OVER ELECTRIC HOB: 7KW (max) OVER GAS HOB: 10KW (max) SLOT-IN GAS COOKER: 13.5KW (max) SLOT-IN ELECTRIC COOKER: 12.4KW (max) Note: CE Marking
Summary of the content on the page No. 11
INSTALLING THE COOKER HOOD Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. All installations must comply with the local authorities requirements for the discharge of exhaust air. Incorrect installation may affect the safety of this cooker hood. Installation Requirements Before installation check the wall to which the cooker hood is to be fitted for electric cables, water pipes or gas. If it is necessary to fix the hood to a h
Summary of the content on the page No. 12
Clearance Height 1 A minimum clearance height of 650mm (25 / ”) is 2 required when installed above a built-in electric hob, or 1 700mm (27 / ”) when installed above a built-in gas hob. 2 A minimum clearance height of 685mm (27”) is required when installed above a slot-in electric oven, or 787mm 1 (30 / ”) when installed above a slot-in gas oven. 2 Hob When installed between adjoining wall cabinets, the wall cabinets must not overhang the hob and the distance between the underside of the cabinet
Summary of the content on the page No. 13
Venting The hood is more effective when used in the extraction setting (ducted to the outside). Venting kits maybe purchased through your retailer or DIY store, and must be ducted to an outside vent of 100mm (4”) minimum. The ducting used must be manufactured from fire retardant material which should conform to the relevant British Standard or DIN4102-B1. When the hood is ducted externally the charcoal filter must be removed and the slider control must be in the ducting position. To Fit the Duct
Summary of the content on the page No. 14
Wall Cabinet Fitting Before fitting the cooker hood beneath any type of wall cabinet ensure it is firmly fixed to the wall in accordance with the manufacturers instructions. 1. Use the paper template provided to mark the hole positions on the underside of the cabinet. Ensure the front edges of the template are aligned with the front edge of the cabinet carcase. 2. Check the distances are correct with a tape measure as stated on the template. The four holes are 5mm (1/4”) diameter. 3. If the duct
Summary of the content on the page No. 15
5. Turn the screws clockwise to lift the front edge of the hood and use a spirit level to check the hood is positioned at right angles to the wall before fitting the security system. 6. The wall brackets have two studs and when the cooker hood is hung onto the brackets the studs project trought the holes above the levelling screws. 7. When the hood is level fit the two shake proof washers and nuts supplied to fully secure the cooker hood. 15
Summary of the content on the page No. 16
© Electrolux Household Appliances Limited 2000 4324165 02 - 230300
