Summary of the content on the page No. 1
2-653-153-51 (1)
FM/AM
Compact Disc Player
US
Operating Instructions
FR
Mode d’emploi
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record these numbers in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. Serial No.
To cancel the demonstration (DEMO) display, see page 10.
Pour annuler
Summary of the content on the page No. 2
Welcome ! Warning Thank you for purchasing this Sony Compact This equipment has been tested and found to Disc Player. You can enjoy your drive with the comply with the limits for a Class B digital following functions. device, pursuant to Part 15 of the FCC Rules. CD playback These limits are designed to provide reasonable You can play CD-DA (also containing CD protection against harmful interference in a TEXT*), CD-R/CD-RW (MP3/WMA files also residential installation. This equipment containing
Summary of the content on the page No. 3
Table of Contents Getting Started Other functions Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4 Changing the sound settings . . . . . . . . . . . . . . . 9 Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4 Adjusting the sound characteristics Detaching the front panel . . . . . . . . . . . . . . . . . 4 — BAL/FAD/SUB. . . . . . . . . . . . . . . . . . . . 9 Attaching the front panel . . . . . . . . . . . . . . . 5 Customizing the equalizer curve Inserting
Summary of the content on the page No. 4
Getting Started Detaching the front panel You can detach the front panel of this unit to Resetting the unit prevent theft. Before operating the unit for the first time, or Caution alarm after replacing the car battery or changing the If you turn the ignition switch to the OFF connections, you must reset the unit. position without detaching the front panel, the Detach the front panel and press the RESET caution alarm will sound for a few seconds. button with a pointed object, such as a ball
Summary of the content on the page No. 5
Attaching the front panel Inserting the disc in the unit Place the hole A of the front panel onto the spindle B on the unit, then lightly push the left 1 Press (OPEN). side in. 2 Insert the disc (label side up). Press (SOURCE) on the unit (or insert a disc) to operate the unit. A B 3 Close the front panel. Playback starts automatically. Ejecting the disc 1 Press (OPEN). 2 Press Z. The disc is ejected. x 3 Close the front panel. Note Do not put anything on the inner surface of the front panel.
Summary of the content on the page No. 6
Location of controls and basic operations Main unit CDX-GT350S CDX-GT300 Front panel removed qk ql w; RESET Refer to the pages listed for details. The Card remote commander corresponding buttons on the card remote RM-X151 commander control the same functions as those on the unit. wd 1 OFF ATT A OFF button wf To power off; stop the source. qs SOURCE SEL MODE B Volume control dial/select button 9 qd wa To adjust volume (rotate); select setup items (press and rotate). + C Receptor for the car
Summary of the content on the page No. 7
2 3 4 H GP* /ALBM* +/– buttons* T Disc slot 5 To skip groups/albums (press); skip groups/ To insert the disc. albums continuously (press and hold). The following buttons on the card remote I SEEK –/+ buttons commander have also different buttons/functions from the unit. CD: To skip tracks (press); skip tracks wa < (.)/, (>) buttons continuously (press, then press again within To control CD/radio, the same as (SEEK) about 1 second and hold); reverse/fast- –/+ on the unit. forward a track (p
Summary of the content on the page No. 8
CD Radio For details on selecting a CD/MD changer, see Storing and receiving stations page 10. Caution Display items When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically — BTM 1 Press (SOURCE) repeatedly until “TUNER” appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2. A ATRAC CD indication 2 Press and hold (BTM) until “BTM” B Source flashes. C WMA/MP3/BBE MP indication The unit st
Summary of the content on the page No. 9
Tip Other equalizer types are also adjustable. Other functions With the card remote commander Changing the sound settings In step 3, to adjust the selected item, press <, M, , or m. Adjusting the sound Adjusting setup items — SET characteristics — BAL/FAD/SUB You can adjust the balance, fader, and subwoofer 1 Press and hold the select button. volume. The setup display appears. 1 Press the select button repeatedly 2 Press the select button repeatedly until “BAL,” “FAD” or “SUB” appears. unti
Summary of the content on the page No. 10
1 Adjust the volume level DEMO* (Demonstration) To set “DEMO-ON” (z) or “DEMO-OFF.” Be sure to adjust the volume for each connected A.SCRL (Auto Scroll) audio device before playback. To scroll long displayed item automatically 1 Turn down the volume on the unit. when the disc/group/track/album is changed. 2 Press (SOURCE) repeatedly until “AUX – “A.SCRL-ON”: to scroll. FRONT IN” appears. – “A.SCRL-OFF” (z): to not scroll. 3 3 Start playback of the portable audio device at a LPF* (Low Pass Fi
Summary of the content on the page No. 11
DSPL MODE SEL Repeat and shuffle play The following controls on the rotary commander require a different operation from the unit. 1 During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting PRESET/DISC control appears. The same as (GP/ALBM) +/– on the unit (push in and rotate). Select To play VOL (volume) control 1 The same as the volume control dial on the unit REP-DISC* disc repeatedly. (rotate). SHUF- tracks in the changer in random SEEK/AMS control 1 CHGR
Summary of the content on the page No. 12
Before playing, clean the discs Additional Information with a commercially available cleaning cloth. Wipe each disc from the center out. Do not use Precautions solvents such as benzine, thinner, commercially available If your car has been parked in direct sunlight, cleaners, or antistatic spray allow the unit to cool off before operating it. intended for analog discs. Power antenna will extend automatically while the unit is operating. Notes on CD-R/CD-RW discs Some CD-Rs/CD-RWs
Summary of the content on the page No. 13
Playback order of MP3/WMA files ATRAC CD ATRAC CD is recorded audio CD data which is Folder MP3/WMA compressed to ATRAC3 or ATRAC3plus format (album) using authorized software, such as SonicStage 2.0 or MP3/WMA file later, or SonicStage Simple Burner. (track) The maximum number of: – folders (groups): 255 – files (tracks): 999 The characters for a folder/file name and text information written by SonicStage is displayed. For details on ATRAC CD, see the SonicStage or SonicStage Simple
Summary of the content on the page No. 14
Fuse replacement 3Pull out the release keys to remove the When replacing the fuse, be protection collar. sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, Fuse (10A) consult your nearest Sony 2 Remove the unit. dealer. 1Insert both release keys simultaneously Cleaning the connectors until they click
Summary of the content on the page No. 15
Tuner section US and foreign patents licensed from Dolby FM Laboratories. Tuning range: 87.5 – 107.9 MHz Antenna terminal: External antenna connector Intermediate frequency: 10.7 MHz/450 kHz MPEG Layer-3 audio coding technology and Usable sensitivity: 9 dBf patents licensed from Fraunhofer IIS and Selectivity: 75 dB at 400 kHz Thomson. Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono) Harmonic distortion at 1 kHz: 0.5 % (stereo), Note 0.3 % (mono) This unit cannot be connected to a digital
Summary of the content on the page No. 16
The contents of the memory have been erased. “MS” or “MD” does not appear on the source The RESET button has been pressed. display when both the optional MGS-X1 and tStore again into the memory. MD changer are connected. The power connecting lead or battery has been This unit recognizes MGS-X1 as an MD unit. disconnected. t Press (SOURCE) until “MS” or “MD” appears, The power connecting lead is not connected properly. then press (MODE) repeatedly. Stored stations and correct time are er
Summary of the content on the page No. 17
READ Error displays/Messages The unit is reading all track and group information on the disc. 1 BLANK* t Wait until reading is complete and playback starts 2 Tracks have not been recorded on the MD.* automatically. Depending on the disc structure, it t Play an MD with recorded tracks. may take more than a minute. 1 ERROR* RESET 2 The disc is dirty or inserted upside down.* The CD unit and CD/MD changer cannot be operated t Clean or insert the disc correctly. because of some problem. A bl
Summary of the content on the page No. 18
ATTENTION Félicitations ! L’utilisation d’instruments optiques avec ce produit augmente les risques pour les yeux. Nous vous remercions d’avoir fait l’acquisition de ce lecteur de disques compacts Sony. Ce lecteur vous offre les fonctions suivantes. Avertissement si le contact de votre Lecture de CD véhicule ne comporte pas de position Possibilité de lecture de CD-DA (contenant ACC également des informations CD TEXT*), de Après avoir coupé le moteur, n’oubliez pas de CD-R/CD-RW (fichie
Summary of the content on the page No. 19
Table des matières Préparation Autres fonctions Réinitialisation de l’appareil . . . . . . . . . . . . . . . 4 Changement des réglages du son . . . . . . . . . . 10 Réglage de l’horloge . . . . . . . . . . . . . . . . . . . . . 4 Réglage des caractéristiques du son Retrait de la façade . . . . . . . . . . . . . . . . . . . . . . 4 — BAL/FAD/SUB. . . . . . . . . . . . . . . . . . . 10 Installation de la façade . . . . . . . . . . . . . . . . 5 Personnalisation de la courbe de l’égaliseur Insert
Summary of the content on the page No. 20
Préparation Retrait de la façade Vous pouvez retirer la façade de cet appareil pour Réinitialisation de l’appareil le protéger du vol. Avant la première mise en service de l’appareil, Alarme d’avertissement après avoir remplacé la batterie du véhicule ou Si vous mettez la clé de contact en position OFF modifié les raccordements, vous devez sans ôter la façade, l’alarme d’avertissement réinitialiser l’appareil. retentit pendant quelques secondes. Retirez la façade, puis appuyez sur la touch
