Summary of the content on the page No. 1
2-696-856-21 (1)
FM/AM
Compact Disc Player
US
Operating Instructions
FR
Mode d’emploi
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. CDX-GT110 Serial No.
To cancel the demonstration (DEMO) display, see page 8.
Pour annuler l’affichage de démonstration (DEMO), reportez-vo
Summary of the content on the page No. 2
For installation and connections, see the supplied installation/connections manual. Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harm
Summary of the content on the page No. 3
Table of Contents Welcome ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Other functions Changing the sound settings . . . . . . . . . . . . . . . 8 Getting Started Adjusting the balance and fader — BAL/FAD . . . . . . . . . . . . . . . . . . . . . . . . 8 Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4 Customizing the equalizer curve Detaching the front panel . . . . . . . . . . . . . . . . . 4 — EQ lite . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
Welcome ! Getting Started Thank you for purchasing this Sony Compact Setting the clock Disc Player. You can enjoy your drive with the following functions. The clock uses a 12-hour digital indication. CD playback 1 Press and hold the select button. You can play CD-DA (also containing CD The setup display appears. TEXT*) and CD-R/CD-RW for audio use. 2 Press the select button repeatedly until “CLOCK-ADJ” appears. 3 Press (SEEK) +. The hour indication flashes. Radio reception 4 Rotate the v
Summary of the content on the page No. 5
Attaching the front panel Engage part A of the front panel with part B of the unit, as illustrated, and push the left side into position until it clicks. A B Note Do not put anything on the inner surface of the front panel. 5
Summary of the content on the page No. 6
Location of controls and basic operations Main unit 12 3 4 567 8 OFF PUSH SELECT EQ SOURCE AUX SEEK SEEK DIM DSPL MODE REP SHUF PAUSE 12 34 5 6 CDX-GT110 9 q; qa qs qd Refer to the pages listed for details. K SEEK –/+ buttons CD: A OFF button To skip tracks (press); skip tracks To power off; stop the source. continuously (press, then press again within about 1 second and hold); reverse/fast- B EQ (equalizer) button 8 forward a track (press and hold). To select an equalizer type (XPLOD, Radio
Summary of the content on the page No. 7
Tuning automatically Radio 1 Select the band, then press (SEEK) –/+ Storing and receiving stations to search for the station. Scanning stops when the unit receives a Caution station. Repeat this procedure until the When tuning in stations while driving, use Best desired station is received. Tuning Memory (BTM) to prevent an accident. Tip If you know the frequency of the station you want to listen to, press and hold (SEEK) –/+ to locate the Storing automatically — BTM approximate frequency,
Summary of the content on the page No. 8
Other functions Adjusting setup items — SET 1 Press and hold the select button. Changing the sound settings The setup display appears. 2 Press the select button repeatedly Adjusting the balance and fader until the desired item appears. — BAL/FAD 3 Rotate the volume control dial to select the setting (example “ON” or 1 Press the select button repeatedly “OFF”). until “BAL” or “FAD” appears. The item changes as follows: 4 Press and hold the select button. 1 1 The setup is complete and the dis
Summary of the content on the page No. 9
2 Adjust the volume level MONO* (Monaural Mode) To improve poor FM reception, select monaural Be sure to adjust the volume for each connected reception mode. audio device before playback. – “MONO-ON”: to hear stereo broadcast in 1 Turn down the volume on the unit. monaural. – “MONO-OFF” (z): to hear stereo broadcast in 2 Press (SOURCE) repeatedly until “AUX” stereo. appears. “FRONT IN” appears. LOUD (Loudness) To allow you to listen clearly at low volume 3 Start playback of the portable au
Summary of the content on the page No. 10
Before playing, clean the discs Additional Information with a commercially available cleaning cloth. Wipe each disc from the center out. Do not use Precautions solvents such as benzine, thinner, commercially available If your car has been parked in direct sunlight, cleaners, or antistatic spray allow the unit to cool off before operating it. intended for analog discs. Power antenna (aerial) will extend automatically while the unit is operating. Notes on CD-R/CD-RW discs Some CD-
Summary of the content on the page No. 11
Cleaning the connectors 2 Remove the unit. The unit may not function properly if the connectors 1Insert both release keys simultaneously between the unit and the front panel are not clean. In until they click. order to prevent this, detach the front panel (page 4) and clean the connectors with a cotton swab. Do not apply too much force. Otherwise, the connectors Hook facing may be damaged. inwards. 2Pull the release keys to unseat the unit. Main unit Back of the front panel Notes For s
Summary of the content on the page No. 12
Tuner section Troubleshooting FM Tuning range: 87.5 – 107.9 MHz The following checklist will help you remedy Antenna (aerial) terminal: problems you may encounter with your unit. External antenna (aerial) connector Before going through the checklist below, check the Intermediate frequency: 10.7 MHz/450 kHz connection and operating procedures. Usable sensitivity: 9 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono) General Harmonic distortion at 1 kHz: 0.5 %
Summary of the content on the page No. 13
The disc will not eject. OFFSET Press Z (eject) (page 6). There may be an internal malfunction. t Check the connection. If the error indication remains on in the display, consult your nearest Radio reception Sony dealer. The stations cannot be received. READ The sound is hampered by noises. The unit is reading all track information on the disc. Connect a power antenna (aerial) control lead (blue) t Wait until reading is complete and playback starts or accessory power supply lead (red) to t
Summary of the content on the page No. 14
En ce qui concerne l’installation et les connexions, consulter le manuel d’installation/raccordement fourni. Avertissement ATTENTION L’utilisation d’instruments optiques avec ce produit augmente les risques pour les yeux. Avertissement si le contact de votre véhicule ne comporte pas de position ACC Veillez à régler la fonction Auto Off (page 8). L’appareil s’éteint complètement et automatiquement après le laps de temps choisi une fois l’appareil mis hors tension afin d’éviter que la batt
Summary of the content on the page No. 15
Table des matières Félicitations ! . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Autres fonctions Changement des réglages du son . . . . . . . . . . . 8 Préparation Réglage de la balance gauche-droite et de l’équilibre avant-arrière Réglage de l’horloge . . . . . . . . . . . . . . . . . . . . . 4 — BAL/FAD . . . . . . . . . . . . . . . . . . . . . . . . 8 Retrait de la façade . . . . . . . . . . . . . . . . . . . . . . 4 Personnalisation de la courbe de l’égaliseur Installation de l
Summary of the content on the page No. 16
Félicitations ! Préparation Nous vous remercions d’avoir fait l’acquisition Réglage de l’horloge de ce lecteur de disques compacts Sony. Ce lecteur vous offre les fonctions suivantes. L’horloge numérique fonctionne suivant un cycle Lecture de CD de 12 heures. Vous pouvez lire des CD-DA (contenant 1 Appuyez sur la touche de sélection et également des informations CD TEXT*) et des maintenez-la enfoncée. CD-R/CD-RW destinés à un usage audio. L’écran de configuration apparaît. 2 Appuyez plus
Summary of the content on the page No. 17
Installation de la façade Insérez la partie A de la façade dans la partie B de l’appareil, tel qu’illustré, puis poussez sur le côté gauche jusqu’au déclic de mise en place. A B Remarque Ne posez rien sur la face interne de la façade. 5
Summary of the content on the page No. 18
Emplacement des commandes et opérations de base Appareil principal 12 3 4 567 8 OFF PUSH SELECT EQ SOURCE AUX SEEK SEEK DIM DSPL MODE REP SHUF PAUSE 12 34 5 6 CDX-GT110 9 q; qa qs qd Pour plus de détails, reportez-vous aux numéros K Touches SEEK –/+ de pages indiqués. CD : Saut de plages (appuyez) ; saut de plages en A Touche OFF continu (appuyez, puis appuyez dans un Mise hors tension de l’appareil ; arrêt de la délai d’environ 1 seconde et maintenez la source. touche enfoncée) ; retour/ava
Summary of the content on the page No. 19
Syntonisation automatique des Radio fréquences Mémorisation et réception des 1 Sélectionnez la bande, puis appuyez stations sur (SEEK) –/+ pour rechercher la station. Le balayage s’interrompt lorsque l’appareil Attention capte une station. Répétez cette procédure Pour régler des stations pendant que vous jusqu’à ce que vous captiez la station conduisez, utilisez la fonction de BTM souhaitée. (mémorisation des meilleurs accords) afin d’éviter tout accident. Conseil Si vous connaissez l
Summary of the content on the page No. 20
Conseil Vous pouvez également régler d’autres types Autres fonctions d’égaliseurs. Changement des réglages du son Réglage des paramètres de configuration — SET Réglage de la balance gauche- 1 Appuyez sur la touche de sélection et droite et de l’équilibre avant-arrière maintenez-la enfoncée. — BAL/FAD L’écran de configuration apparaît. 1 Appuyez plusieurs fois sur la touche 2 Appuyez plusieurs fois sur la touche de sélection jusqu’à ce que « BAL » ou de sélection, jusqu’à ce que le « FAD
