Summary of the content on the page No. 1
Operating and Installation
Instructions
Ventilation System
DA 5321 W
DA 5381 W
DA 5391 W
en - US, CA
To prevent accidents
and appliance damage,
read these instructions
before
installation or use. M.-Nr. 07 901 910
Summary of the content on the page No. 2
Contents IMPORTANT SAFETY INSTRUCTIONS.................................3 Functional description .............................................7 Guide to the Ventilation System......................................8 Operation .......................................................10 Turning on the fan .................................................10 Selecting the power level............................................10 Delayed Shut Down................................................12 Turning
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS WARNING READ AND SAVE THESE TO REDUCE THE RISK OF INSTRUCTIONS FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, Keep these instructions in a safe OBSERVE THE FOLLOWING: place and pass them on to any future user. a) Use this appliance only in the manner intended by the manufacturer. Read these instructions carefully If you have questions, contact Miele. before installing or using the b) Before servicing or cleaning the Ventilation System. appliance, switch power off
Summary of the content on the page No. 4
IMPORTANT SAFETY INSTRUCTIONS d) Before connecting the appliance Use to the power supply make sure that the voltage and frequency listed on the WARNING data plate correspond with the TO REDUCE THE RISK OF A household electrical supply. COOKTOP GREASE FIRE: This data must correspond to prevent appliance damage. If in doubt consult a a) Never leave surface units qualified electrician. unattended at high settings. Boilovers cause smoking and greasy spillovers e) Installation work and repairs
Summary of the content on the page No. 5
IMPORTANT SAFETY INSTRUCTIONS WARNING Do not allow children to play with or operate the appliance or its controls. TO REDUCE THE RISK OF Supervise its use by the elderly or INJURY TO PERSONS IN THE infirm. EVENT OF A COOKTOP Always turn on the hood when using GREASE FIRE, OBSERVE THE the cooktop to prevent damage from * FOLLOWING : condensation. a) SMOTHER FLAMES with a close Never operate gas burners without fitting lid, cookie sheet, or metal tray cookware. Turn the burner off when no
Summary of the content on the page No. 6
IMPORTANT SAFETY INSTRUCTIONS Installation g) Do not install this hood over cooktops that burn solid fuel. WARNING h) Provided a larger distance is not TO REDUCE THE RISK OF given by the manufacturer of the cooktop, follow the minimum safety FIRE, ELECTRIC SHOCK, OR distances between a cooktop and the INJURY TO PERSONS, bottom of the hood given in the OBSERVE THE FOLLOWING: "Appliance dimensions" section of this a) Installation work and electrical manual. wiring must be done by qualified
Summary of the content on the page No. 7
Functional description The hood offers two modes of operation: Air extraction Recirculation mode The air is drawn in and cleaned by the Air is drawn through the grease filters grease filters and directed outside. and an active charcoal filter. The filtered air is then recirculated back into The hood comes equipped with a the kitchen through a vent at the top of non-return flap. This flap automatically the hood’s chimney. closes when the hood is turned off so that no exchange of outside air and T
Summary of the content on the page No. 8
Guide to the Ventilation System 8
Summary of the content on the page No. 9
Guide to the Ventilation System Chimney extension Grease filter button The indicator next to the grease filter Chimney button lights when the grease filters need to be cleaned. This button is also Canopy used: – to reset the grease filter timer after Charcoal filter cleaning the grease filters (see "Cleaning and Care"). (optional accessory) – to show how long the grease filters Grease filter have been in use (see "Operation/ Filter timers"). Recirculation vent – to change the numbe
Summary of the content on the page No. 10
Operation Turning on the fan Automatically switching back the Intensive power level The intensive level "4" can be programmed to automatically switch back to level "3" after 10 minutes. Press the On/Off button. Turn the fan and the lights off. Selecting the power level Press and hold the Delayed Shut down button for 10 secs. The first Use the "–/+" controls to select the indicator of the fan power levels desired power level. lights. + = increases the fan speed Press the following butto
Summary of the content on the page No. 11
Operation If the power level indicators flash the Fan performance automatic switch back is not activated. The maximum air flow capacity is 625 cfm. Factors such as narrow duct diameter and bends will affect this value. Level 1 operates at 40% capacity To activate the automatic switch back Level 2 operates at 60% capacity press the "+" button. Level 3 operates at 80% capacity Level 4 operates at 100% capacity The power level indicators light. There will also be a slight decrease in To deactiv
Summary of the content on the page No. 12
Operation Delayed Shut Down Turning off the fan If odors or smoke remain in the kitchen after cooking has been completed, the Delayed Shut Down feature can be selected to allow the hood to continue Press the On/Off button to turn the running for either 5 or 15 minutes. fan off. The indicator will go out. Automatic Safety Shut Off Press the Delayed Shut Down button The fan will turn off automatically while the fan is still running. 10 hours after the last button was Press once = 5 minute dela
Summary of the content on the page No. 13
Operation Turning the lighting On/Off Dimming the lighting The overhead lighting can be turned on The brightness of the lighting can be and off independently from the fan. adjusted. While the lighting is turned on, press the light button. The lighting will dim until the button is released. Press the light button briefly to turn If the button is pressed again, the on the lighting. lighting will brighten until the button is released. The light button indicator illuminates. If the button is p
Summary of the content on the page No. 14
Operation Filter timers Checking the filter timers Press the On/Off button to turn the Grease filters fan on. A timer monitors the hours of fan operation. The indicator for the grease filter will light after 30 hours of operation. The grease filters must then be cleaned. Press and hold the grease or charcoal filter button. After the grease filters have been cleaned and put back in place, the grease filter timer must be reset. The number of flashing "–/+" indicators show the percentage of pro
Summary of the content on the page No. 15
Operation Reprogramming the timers The grease filter timer is preset to 30 hours. This time can be lengthened or shortened to 20, 30, 40, or 50 hours. The lit indicator shows the programmed – A time of 20 hours should be time: programmed in kitchens with 1st indicator from the left = 20 hours frequent pan or deep frying. 2nd indicator from the left = 30 hours – A time of 20 hours should also be 3rd indicator from the left = 40 hours programmed if the kitchen is only 4th indicator from the left =
Summary of the content on the page No. 16
Operation Reprogramming the charcoal filter timer The active charcoal filter can only be used in recirculation mode and cannot The lit indicator shows the programmed be used to exhaust fumes. time: The charcoal filter timer is not preset. 1st indicator from the left = 20 hours Before using the hood in recirculation 2nd indicator from the left = 30 hours mode, the charcoal filter timer must be 3rd indicator from the left = 40 hours programmed. 4th indicator from the left = 50 hours Use the "–/+
Summary of the content on the page No. 17
Cleaning and Care WARNING Avoid: TO REDUCE THE RISK OF – cleaning agents containing soda, FIRE, ELECTRIC SHOCK, OR acids or chlorides, INJURY TO PERSONS, – abrasive cleaning agents OBSERVE THE FOLLOWING: e.g. powder or cream cleansers, – abrasive sponges, e.g. pot scourers Before cleaning or servicing the or sponges which have been hood, disconnect it from the power previously used with abrasive supply, see "Important Safety cleaning agents. Instructions". These will damage the surface. The fol
Summary of the content on the page No. 18
Cleaning and Care Grease filters In a dishwasher: place the filter vertically in the lower basket, making The reusable metal grease filters sure that the spray arm is not remove solid particles from the vented blocked. kitchen air (grease, dust, etc). Use a wash program with a max. temperature of 150°F (65°C). In a Miele dishwasher use the "Normal" program. Use the recommended amount of dishwasher detergent. Overuse could The grease filters should be cleaned destroy the filter. every3-4 weeks
Summary of the content on the page No. 19
Cleaning and Care Active charcoal filter In recirculation mode an active charcoal filter must be used in addition to the grease filters. It is designed to absorb cooking odors. The active charcoal filter will be replaced in the canopy above the grease filters. Replacement active charcoal filters Insert the charcoal filter. can be ordered from Miele. Before using: Remove the grease filters to access Program the charcoal filter timer, see the charcoal filter. See "Cleaning and "Operation / R
Summary of the content on the page No. 20
Cleaning and Care Changing the light bulbs WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Before changing the light bulbs, disconnect the hood from the power supply, see "Important Safety Instructions". When in use halogen bulbs become extremely hot, and can burn your hands. Do not attempt to change the bulbs until they have had sufficient time to cool. To change the halogen bulb, first Do not touch the bulb surface. gently press the light cov
