Summary of the content on the page No. 1
KOBE Brand Range Hood
CH-177 Models
CH7730SQ
CH7736SQ
CH7742SQ
CH7748SQ
Professional Style Range Hood
INSTALLATION INSTRUCTIONS
AND OPERATION MANUAL
- READ AND SAVE THESE INSTRUCTIONS -
- READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING -
ALL WIRING MUST BE DONE BY A PROFESSIONAL AND IN
ACCORDANCE WITH NATIONAL AND LOCAL ELECTRICAL CODES.
Summary of the content on the page No. 2
- PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY, OBSERVE THE FOLLOWING: 1) Installation work and electrical wiring must be done by qualified professionals and in accordance with all applicable codes and standards, including fire-rated construction. 2) When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or other hidden utilities. 3) Ducted fans must always be v
Summary of the content on the page No. 3
- IMPORTANT SAFETY INSTRUCTIONS - WARNING – TO REDUCE THE RISK OF PERSONAL INJURY IN THE EVENT OF A RANGE TOP GREASE FIRE: Keep fan, optional filter and grease-laden surfaces clean. Always turn hood ON when cooking at high heat. Use high settings on cooking range ONLY when necessary. Heat the oil slowly on low to medium setting. Do not leave cooking range unattended when cooking. Always use cookware and utensils appropriate for the type and amount of food prepa
Summary of the content on the page No. 4
- CONTENTS OF RANGE HOOD PACKAGE - (Must keep all materials for returns or refunds) 1) KOBE Range Hood 2) Two Impeller Safety Screen 3) Two Round and Two Oval Oil Containers 4) Halogen Lights 12V20W 5) One Plastic Multi Duct Exhaust Base (6” Round, 7” Round or 3¼” x 10” Options) 6) Installation/Owner’s Manual & Warranty Card 7) Packaging Materials May Include: a) Plastic Bag To Cover Hood b) Styrofoam c) Outer carton Unpack hood and check contents before installing.
Summary of the content on the page No. 5
- PREPARING THE INSTALLATION LOCATION - ----SAFETY WARNING---- INTERIOR OF HOOD MAY HAVE VERY SHARP EDGES, PLEASE WEAR PROTECTIVE GLOVES IF YOU HAVE TO OPEN THE HOOD FOR CLEANING OR SERVICING. NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING. Make sure the surface of the wall is clean and free of debris. Providing Electrical Power Line Access (SHOULD BE DONE BY A LICENSED PROFESSIONAL) 1. If there is no electrical power line access open
Summary of the content on the page No. 6
- INSTALLING THE RANGE HOOD - (Keep all packing materials for return or exchange) Temporarily wire the hood to test for proper operation before installing. Before installing, please peel protective film off the hood first, if any. NOTE: The recommended distance from range hood bottom to top of the cooking surface is between 28” ~ 30”. {Fig. 1a} {Fig. 1b}
Summary of the content on the page No. 7
b) For rear venting: Unscrew the rectangular plastic vent portion at the back of the hood. {Fig.4} Turn the vent piece over so that the flat surface is facing you. Cut along the indented outline until there is a 3¼” X 10” opening. Fasten plastic vent piece with the raised surface facing outward back onto the hood. {Fig.4} {Fig.5} {Fig.6}
Summary of the content on the page No. 8
3) Follow installation instructions from the section For Mounting on a Cabinet with a Flush Bottom. Making The Electrical Connection (SHOULD BE DONE BY A LICENSED PROFESSIONAL) ----SAFETY WARNING---- INTERIOR OF HOOD MAY HAVE VERY SHARP EDGES, PLEASE WEAR PROTECTIVE GLOVES IF YOU HAVE TO OPEN THE HOOD FOR CLEANING OR SERVICING. CAUTION: MAKE SURE ELECTRICAL POWER IS TURNED OFF BEFORE STARTING THIS SECTION. 1) After turning off the electrical power at the main power source,
Summary of the content on the page No. 9
- OPERATING INSTRUCTIONS - This KOBE hood is equipped with a 10-second time delay operation, four control buttons located on the front of the hood, powerful centrifugal turbine impellers with safety screen covers, bright 12 volt 20 watts halogen lights, and 4 oil containers. The four control buttons (from left to right) are the Light Control, the Speed Control (cycles through Low, Medium, High, QuietMode ), alternate Speed Control (cycles through Low, QuietMode , High, Medium) an
Summary of the content on the page No. 10
- MAINTENANCE OF THE HOOD - ----SAFETY WARNING---- INTERIOR OF HOOD MAY HAVE VERY SHARP EDGES, PLEASE WEAR PROTECTIVE GLOVES IF YOU HAVE TO OPEN THE HOOD FOR CLEANING OR SERVICING. Cleaning To clean the hood surface, use only mild soap or detergent solutions. Dry up surfaces using soft cloth. CAUTION: Never use abrasive cleaners, pads, or cloths. If the hood looks splotchy (stainless steel hood), use an orange base cleaner to clean the surface of the hood (make sure
Summary of the content on the page No. 11
Changing the Light Bulb 1) Make sure all control switches are off and range hood is unplugged. CAUTION: Wait until light is cool to the touch before changing. 2) Use a flat head screwdriver to pop out the protective covering. 3) Gently pull out the defective halogen light and discard. Plug in new halogen light (12V 20W max.). 4) Replace protective cover. 5) Plug in range hood. Keyhole
Summary of the content on the page No. 12
- CIRCUIT DIAGRAM - CH-177 Models 11
Summary of the content on the page No. 13
- PARTS - 12
Summary of the content on the page No. 14
- PARTS LIST - 1 Plastic Multi Duct Exhaust Attachment 22 Light Transformer Support Screw 2 Plastic Vent Cover 23 Light Transformer Support 3 Plastic Rear Vent Cover 24 Transformer 4 Plastic Vent Cover Screw 25 Control Support Screw 5 Rear Plastic Vent Cover Frame 26 Control Support 6 Hood Casing 27 Control Panel 7 Motor Chamber 28 Control Board 8 Motor 29 Capacitor 9 Turbine Impeller 30 Processor Board Box 10 Oil Tunnel Ring 31 Processor Board 11 Oil Tunnel 32 Round Head Scre
Summary of the content on the page No. 15
- SPECIFICATION - STYLE CH-177 MODELS Size 30” 36” 42” 48” 30” x 22” x 9” 36” x 22” x 9” 42” x 22” x 9” 48” x 22” x 9” Dimension (WxDxH) Net Weight (lbs) 48.5 50.6 52.8 55 Features: Stainless Steel #304 ● ● ● ● Turbine Turbine Turbine Turbine Fan Type Impeller Impeller Impeller Impeller Control Button 6 6 6 6 Halogen Light (12 Volts) 20W x 2 20W x 2 20W x 3 20W x 3 Duct Free* ● ● ● ● Safety Screen 2 2 2 2 Oil Container 4 4 4 4 Accessories: (Additional Purchase)
Summary of the content on the page No. 16
DISCLAIMER 1) CAREFULLY INSPECT ALL ITEMS FOR DAMAGES BEFORE ACCEPTING DELIVERY. NOTE ANY DAMAGES ON THE FREIGHT BILL OR EXPRESS RECEIPT, REQUEST SIGNATURE OF THE CARRIER’S AGENT AND KEEP COPY TO SUPPORT YOUR CLAIM. Upon acceptance by the carrier, he/she assumes responsibility for its safe arrival. Damages should be reported to carrier and a claim filed. Failure to do this could result in the carrier refusing to honor your claim. The carrier will furnish you with necessary forms fo
Summary of the content on the page No. 17
WARRANTY CERTIFICATE KOBE Range Hoods warrants all products manufactured or supplied by it to be free from defects in workmanship and materials. Its obligations pursuant to this warranty are limited to a period of two years from the date of purchase and to the repair or replacement at its option and subject to the terms and conditions stated below, of any component part, which its examination shall disclose to be so defective. TWO-YEAR WARRANTY SERVICE PERIOD Any covered failur
Summary of the content on the page No. 18
CONSEQUENTIAL DAMAGE The warrantor is not responsible for any consequential damage. SOME STATES DO NOT ALLOW THE EXCLUSION OF CONSEQUENTIAL DAMAGE SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. IMPLIED WARRANTIES/STATE LAW Any implied warranties, including the implied warranty of merchantability and fitness for purpose, imposed on the sale by the laws of the state of sale are limited to two years from the date of original purchase. Some states do not allow limitations on t