Greenheck Fan OFSD-211 user manual

Summary of the content on the page No. 1

model OFSd-211
Out Of Wall Combination FIRe SmOKe dAmPeRS
Steel 3V Blades
APPLICATION
UL 555S Leakage Class I
Model OFSD-211 is approved for use in walls, partitions, and floors
1
UL555 1 ⁄2 Hour Fire Resistance Rating
with fire resistance ratings less than 3 hours. OFSD-211 is an ‘out of
Horizontal or Vertical Mount
the wall’ high performance combination fire smoke damper with 3V
style blades. Removal of wall grille allows access to actuator and
Model OFSD-211 meets the requirements for

Summary of the content on the page No. 2

Pressure drop data OFSd-211 This pressure drop testing was conducted in accordance with AMCA Standard 500-D using the three configurations shown. All 3 3 data has been corrected to represent standard air at a density of .075 lb/ft (1.201 kg/m ). Actual pressure drop found in any HVAC system is a combination of many factors. This pressure drop information along with an analysis of other system influences should be used to estimate actual pressure losses for a damper installed in a given HVAC

Summary of the content on the page No. 3

5D 6D AmCA 5.2 Pressure drop OFSd-211 5D 4 (W) (H) D 3.14 * This size is based on multi-section unit. 12 in. x 12 in. (305mm x 305mm) 24 in. x 24 in. (610mm x 610mm) 36 in. x 36 in. (914mm x 914mm) 12 in. x 48 in. (305mm x 1219mm) 48 in. x 12 in. (1219mm x 305mm) Pressure Drop Pressure Drop Pressure Drop Pressure Drop Pressure Drop Velocity (fpm) Velocity (fpm) Velocity (fpm) Velocity (fpm) Velocity (fpm) (in. wg) (in. wg) (in. wg) (in. wg) (in. wg) 500 0.04 500 0.02 500 0.01 500 0.0

Summary of the content on the page No. 4

AmCA 5.3 Pressure drop OFSd-211 5D 6D 5D 4 (W) (H) D 3.14 * This size is based on multi-section unit. 12 in. x 12 in. (305mm x 305mm) 24 in. x 24 in. (610mm x 610mm) 36 in. x 36 in. (914mm x 914mm) 12 in. x 48 in. (305mm x 1219mm) 48 in. x 12 in. (1219mm x 305mm) Pressure Drop Pressure Drop Pressure Drop Pressure Drop Pressure Drop Velocity (fpm) Velocity (fpm) Velocity (fpm) Velocity (fpm) Velocity (fpm) (in. wg) (in. wg) (in. wg) (in. wg) (in. wg) 500 0.02 500 0.01 500 0.01 500 0.01

Summary of the content on the page No. 5

5D 6D 5D 4 (W) (H) D 3.14 AmCA 5.5 Pressure drop OFSd-211 * This size is based on multi-section unit. 48 in. x 12 in. (1219mm x 305mm) 12 in. x 12 in. (305mm x 305mm) 24 in. x 24 in. (610mm x 610mm) 36 in. x 36 in. (914mm x 914mm) 12 in. x 48 in. (305mm x 1219mm) Pressure Drop Pressure Drop Pressure Drop Pressure Drop Pressure Drop Velocity (fpm) Velocity (fpm) Velocity (fpm) Velocity (fpm) Velocity (fpm) (in. wg) (in. wg) (in. wg) (in. wg) (in. wg) 500 0.06 500 0.03 500 0.03 500 0.03

Summary of the content on the page No. 6

Application data OFSd-211 Actuator Space envelopes The drawing below and corresponding table show the minimum dimensions required for internal actuator mounting on OFSD-211s. The standard mounting locations provide enough space for the mounting of actuators and controls plus Factory supplied thermal allowing space for a grille and duct connection (see Sleeve Length below). blanket around sleeve Honeywell Actuator Space mL-4XXX series mS4120 series envelopes Grille X mS4XXX series (Suppli