Summary of the content on the page No. 1
TEC Electronic Cash Register
MA-1450-1 SERIES
Owner’s Manual
Summary of the content on the page No. 2
NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason- able protection against harmful interference when the equipment is operated in a commer- cial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Opera
Summary of the content on the page No. 3
EO1-11095 MA-1450-1 SERIES 1. OPERATOR’S GUIDE
Summary of the content on the page No. 4
Summary of the content on the page No. 5
EO1-11095 MA-1450-1 SERIES TABLE OF CONTENTS Page 1. TO OUR CUSTOMERS ..............................................................................................................1-1 2. UNPACKING...............................................................................................................................2-1 3. APPEARANCE AND NOMENCLATURE....................................................................................3-1 4. MODE LOCK AND MODE SELECTOR KEYS ...................
Summary of the content on the page No. 6
EO1-11095 MA-1450-1 SERIES 10. REGISTERING PROCEDURE AND PRINT FORMAT......................................................... 10-1 10.1 RECEIPT-ISSUE/NON-ISSUE SELECTION ................................................................10-3 10.2 NO-SALE ......................................................................................................................10-3 10.3 LOAN ..............................................................................................................
Summary of the content on the page No. 7
EO1-11095 MA-1450-1 SERIES 10.35 TAX CALCULATION AND PRINT ..............................................................................10-20 10.36 TAX EXEMPTION.......................................................................................................10-21 10.37 FOOD STAMPABLE TOTAL READ, FOOD STAMP TENDERING ........................... 10-21 10.38 SALE FINALIZATION BY MEDIA KEYS ....................................................................10-22 10.39 MULTI-TENDERING........
Summary of the content on the page No. 8
EO1-11095 MA-1450-1 SERIES 15. PAPER ROLL REPLACEMENT AND OTHER MAINTENANCE OPERATIONS .....................15-1 15.1 REPLACING THE RECEIPT ROLL ..............................................................................15-1 15.2 REPLACING THE JOURNAL ROLL.............................................................................15-2 15.3 REPLACING THE RIBBON CASSETTE ......................................................................15-3 15.4 REPLENISHING INK TO THE STORE NAME STAMP....
Summary of the content on the page No. 9
EO1-11095 1. TO OUR CUSTOMERS 1. TO OUR CUSTOMERS 1. TO OUR CUSTOMERS Thank you for choosing the TEC electronic cash register MA-1450 series. This instruction manual provides a description of the functions and handling of this register and should be read carefully to ensure optimum performance. Since every consideration has been given to safety and reliability, there is no danger of damaging the machine by incorrect operation. Please refer to this manual whenever you have any questions concern
Summary of the content on the page No. 10
EO1-11095 2. UNPACKING 2. UNPACKING 2. UNPACKING (1) (2) (3) (7) (4) (5) (6) (8) (1) Paper Roll 45 mm x Ø50 mm (2 pcs.) (4) Stamp Ink (1 pc.) (2) Mode Key (5) Ribbon Cassette (1 pc.) (REG Key, MGR Key, MA Key, S Key; 2 pcs. (6) Journal Reel (1 pc.) respectively) (7) Drawer Key (2 pcs.) (3) Receipt Cover Key (2 pcs.) (8) Owner’s Manual (1 pc.) 2-1
Summary of the content on the page No. 11
EO1-11095 3. APPEARANCE AND NOMENCLATURE 3. APPEARANCE AND NOMENCLATURE 3. APPEARANCE AND NOMENCLATURE Customer Display Journal Window Receipt Outlet Operator Display Validation Slot Mode Lock Power Switch Drawer Keyboard • Power Switch ............ The power switch is provided at the right-hand side of the cabinet. The AC power is turned on when the switch is pushed to ON, and turned off when the switch is pushed to OFF. 3-1
Summary of the content on the page No. 12
EO1-11095 4. MODE LOCK AND MODE SELECTOR KEYS 4.1 MODE LOCK 4. MODE LOCK AND MODE SELECTOR KEYS 4.1 MODE LOCK (POSITION) (FUNCTION) MGR X REG SET ........... In this position, the register will allow programming operations. Z ............... (LOCK position) The register operations are locked when the Mode Lock is in this position. SET REG Meanwhile, the Display Message and the Key current time are displayed. REG ........... Normal cash register operations are carried out in this mode. However,
Summary of the content on the page No. 13
EO1-11095 5. DISPLAY 5. DISPLAY 5. DISPLAY The operator display is located at the top of the register just above the keyboard. OPERATOR DISPLAY (Front Display) SLIP AMOUNT DPT RPT IN-LINE SIGN ON TL ALM ST R OFF CG MENU PRICE CLERK The customer display can be fixed as a rear display or moved to form a remote display. It can be moved up, down, to the right, and to the left, and thus is fully adjustable according to the position of the customer. CUSTOMER DISPLAY (Rear or Remote Display) AMOUNT TL
Summary of the content on the page No. 14
EO1-11095 5. DISPLAY 5.1 NUMERIC DISPLAY 5.1 NUMERIC DISPLAY AMOUNT (7 digits) Displays the numeric data, such as amount, quantity, etc. When the amount is negative, the symbol “ - ” is displayed as well. NOTE: When the following codes are being entered, the digits for “RPT” and “DPT” may be used as well (all 10 digits). On exceeding the 10 digits, the lowest 10 digits are being displayed. Non-add Number (max. 18 digits) Customer File No. (max. 12 digits) DPT (2 digits) Displays the Departmen
Summary of the content on the page No. 15
EO1-11095 6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR 6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR 6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR This chapter shows the outline of set-up procedure of the ECR before actually starting the ECR operation. WARNING! Turn the POWER SWITCH to OFF before connecting the power cord. (1) (2) (3) (7) (4) (5) (6) (8) 1 Remove the cash register from the carton, referring to Chapter “2. Unpacking”. And take out a
Summary of the content on the page No. 16
EO1-11095 6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR 6.1 INSTALLING THE RECEIPT/JOURNAL ROLL 6 Install the Receipt and Journal rolls (referring to the following section “Installing the Receipt/Journal Roll”). 6.1 INSTALLING THE RECEIPT/JOURNAL ROLL WARNING! Care must be taken not to injure yourself with the paper cutter. Installing the Receipt Roll X MGR 1 - REG Turn the Mode Lock to the REG position with power ON. Z SET 2 To remove the Receipt Cover, insert the Receipt Cover
Summary of the content on the page No. 17
EO1-11095 6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR 6.1 INSTALLING THE RECEIPT/JOURNAL ROLL 4 Hold the paper roll so that the paper end will be fed from the bottom. 5 Place the paper roll in the outer side holder of the two roll holders. 6 There are the following two ways of a receipt paper feed procedure. A: Manual installation B: Installation using the [RF] key A: Manual installation 1 Lift the green lever on the receipt side. 2 Insert paper from the rear of the printer un
Summary of the content on the page No. 18
EO1-11095 6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR 6.1 INSTALLING THE RECEIPT/JOURNAL ROLL Installing the Journal Roll 1 Follow Steps 1 to 5 for “Installing the Receipt Roll” on the preceding pages, except that the paper roll should be placed inner side holder of the two holders. 2 There are the following two ways of a journal paper feed procedure. A: Manual installation B: Installation using the [JF] key A: Manual installation 1 Lift the green lever on the journal side. 2
Summary of the content on the page No. 19
EO1-11095 6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR 6.2 SETTING THE RIBBON CASSETTE 6.2 SETTING THE RIBBON CASSETTE 1 Detach the Ribbon Cover. 2 Set the Ribbon Cassette. After setting the Ribbon Cassette, turn the knob of the Ribbon Cassette in the arrow direction several times to remove the slack on the ribbon. 3 Attach the Ribbon Cover. 6-5
Summary of the content on the page No. 20
EO1-11095 7. CASHIER KEY OR CASHIER SIGNING OPERATIONS 7.1 CODE ENTRY METHOD 7. CASHIER SIGNING OR CASHIER KEY OPERATIONS The MA-1450 adopts one of the following cashier-identifying operations. • CODE ENTRY METHOD, using the [LOG/RECEIPT] (or [LOG]) key. • CASHIER KEY METHOD (hardware option), using Cashier Keys. • CASHIER KEY METHOD, using [CLK] keys. 7.1 CODE ENTRY METHOD Each cashier will sign-ON, sign-OFF, sign-IN, and sign-OUT through the [LOG/RECEIPT] (or [LOG]) key. OPERATION: Mode Lock
