Summary of the content on the page No. 1
ENGLISH
MODEL
XL-DH259P
MICRO COMPONENT SYSTEM
OPERATION MANUAL
XL-DH259P Micro Component System consisting of XL-DH259P (main unit) and CP-DH259P (speaker system).
iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifi cally
to iPod or iPhone, respectively, and has been certifi ed by the developer to meet Apple perf
Summary of the content on the page No. 2
SPECIAL NOTES NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO residential installation. This equipment generates, uses, NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE and can radiate radio frequency energy and, if not installed PARTS INSIDE. REFER SERVICIN
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS (continued) 11) Only use attachments/accessories specifi ed by the 20) Safety Check - Upon completion of any service or manufacturer. repairs to this product, ask the service technician to 12) Use only with the cart, stand, tripod, perform safety checks to determine that the product is bracket, or table specifi ed by the in proper operating condition. manufacturer, or sold with the apparatus. 21) Wall or ceiling mounting - When mounting the product When a cart is
Summary of the content on the page No. 4
For U.S. customer only CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. Th
Summary of the content on the page No. 5
System connections (continued) Make sure to unplug the AC power cord before making any connections. Video cable TV (not supplied) To video input jack LEFT Wire RIGHT AM loop SPEAKERS Plug in with the antenna lever side facing to the left. Installing the AM loop antenna FM antenna < Assembling > External FM antenna for better reception (not supplied) < Attaching to the wall > Wall Screws (not supplied) AC outlet (AC 120 V ~ 60 Hz) Volume control Remote control The sound level at a give
Summary of the content on the page No. 6
Auto power on function Remote control (continued) When you press any of the following buttons, the unit turns on. Notes concerning use: ® iPod / iPhone, CD, USB, AUDIO IN, TUNER (BAND) Replace the batteries if the operating distance is on the remote control: Selected function is activated. reduced or if the operation becomes erratic. button on the main unit: The unit turns on and Periodically clean the transmitter on the remote control playback of the last function will start (CD, TUNE
Summary of the content on the page No. 7
Listening to the iPod or iPhone iPhone and iPod operations To insert iPod or iPhone adaptor Made for: iPhone 3GS 1 Open the iPod cover by pulling up the tip. iPhone 3G iPhone rd iPod touch (3 generation) nd iPod touch (2 generation) st iPod touch (1 generation) iPod classic iPod with video th iPod nano (5 generation) 2 Insert the iPod or iPhone adaptor into unit and th iPod nano (4 generation) connect your iPod or iPhone. rd iPod nano (3 generation) nd iPod nano (2 generation) iPho
Summary of the content on the page No. 8
Listening to the iPod or iPhone Various iPod functions (continued) Main Remote Function Operation unit control Navigating the iPod and iPhone menus Play Press in the pause mode. 1 Press the MENU button to view the menu on iPod or iPhone unit. Press it again to go back to previous menu. Pause Press in the playback mode. 2 Use the PRESET ( or ) button to select an item on the menu and then press ENTER button. Track Press in the playback Note: or pause mode. If you up/down When navigatin
Summary of the content on the page No. 9
Repeat play Listening to a CD or MP3/WMA disc (continued) Repeat play can play one track, all tracks or a programed sequence continuously. Various disc functions To repeat one track: Press the PLAY MODE button repeatedly until “1-REPEAT” Main Remote appears. Press the (CD/USB ) button. Function Operation unit control To repeat all tracks: Play Press in the stop mode. Press the PLAY MODE button repeatedly until “ALL REPEAT” appears. Press the (CD/USB ) button. Stop Press in the playbac
Summary of the content on the page No. 10
Procedure to playback MP3/WMA disc Advanced CD or MP3/WMA disc with folder mode on playback (continued) To play back CD-R/RW. 3 Press the MEMORY button to save the track number. 1 Press the CD button, and load an MP3/WMA disc. Press 4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks the FOLDER button and disc info will be displayed. can be programed. If you want to check the programed MP3 indicator tracks, press the MEMORY button repeatedly. If you Disc WMA indicator make a mistake,
Summary of the content on the page No. 11
USB cable is not recommended for use in this audio Listening to USB mass storage device/ system to connect to USB memory device. Use of the MP3 player (continued) USB cable will affect the performance of this audio system. To play back USB/MP3 player with folder This USB memory cannot be operated via USB hub. The USB terminal in this unit is not intended for a PC mode off connection but is used for music streaming with a USB 1 Press the USB button on the remote control or memory devic
Summary of the content on the page No. 12
4 Within 30 seconds, press the MEMORY button to store Listening to the radio that station in memory. If the “MEMORY” and preset number indicators disappear before the station is memorized, repeat the operation from step 2. 5 Repeat steps 1 - 4 to set other stations, or to change a preset station. When a new station is stored in the memory, the station previously memorized for that preset channel number will be erased. Note: The backup function protects the memorized stations for a few hou
Summary of the content on the page No. 13
When you select the tuner, select a station by pressing the Setting the clock (continued) or button, and then press the MEMORY button. If a station has not been programmed, “NO PRESET” will be 5 To adjust the minutes, press the or button and displayed and timer setting will be cancelled. then press the MEMORY button. Press the or 9 Adjust the volume using the VOLUME control, and then press button once to advance the time by 1 minute. the MEMORY button. Do not turn the volume up too h
Summary of the content on the page No. 14
Timer and sleep operation Enhancing your system (Remote control only) (continued) The connection cord is not included. Purchase a commercially available cord as shown below. Sleep operation Portable The radio, compact disc, iPod and USB can all be turned audio off automatically. player, etc. 1 Play back the desired sound source. Audio cable 2 Press the SLEEP button. (not supplied) 3 Within 10 seconds, press the SLEEP button repeatedly to select the time. 10 20 30 ....... 80 90 4 “SLEE
Summary of the content on the page No. 15
iPod and iPhone Troubleshooting chart Many potential problems can be resolved by the owner without calling a Symptom Possible cause service technician. No sound is produced. The iPod or iPhone is not playing. If something is wrong with this product, check the following before calling your No image appears on The iPod or iPhone is not properly authorized SHARP dealer or service center. the TV/monitor. connected to the unit. General Is the AC power cord of the unit plugged in? Symptom Po
Summary of the content on the page No. 16
Amplifi er Troubleshooting chart (continued) Care of compact discs Output power RMS: Total 160 watt (80 W per channel into 4 ohms at 1 kHz, 10% Total Compact discs are fairly resistant to damage, however mistracking can occur harmonic distortion.) due to an accumulation of dirt on the disc surface. Follow the guidelines below FTC: 60 watt minimum RMS per channel into 4 ohms from 100 Hz for maximum enjoyment from your CD collection and player. to 20 kHz, 10% Total harmonic Do not write on
