Summary of the content on the page No. 1
O
Model C-1000
TM
mobile entertainment system
Summary of the content on the page No. 2
Table of Contents Welcome ...................................................2 Setup Screen ..........................................29 Product Registration ..................................3 TV .....................................................29 What is Mobile Digital TV? ........................4 Video ................................................30 CIOtvTM Parts List .......................................5 Wireless headphone .........................30 Optional
Summary of the content on the page No. 3
Welcome CIOtv by Winegard is a Multi-Standard Entertainment System specifically designed to OEM automotive standards. Designed to OEM standards means that CIOtv is built to the same quality standards as a new car and adheres to all of the Federal Motor Vehicle Safety Standards (FMVSS) as mandated by the National Transportation Safety Administration. While your entertainment experience is important, the safety of your passengers and family is our first priority. Please read the ow
Summary of the content on the page No. 4
• If you remove or dismount your CIOtv from the provided headrest mounting system (AutoMount), always remove and stow the bracket assembly. A warning label is provided in two locations on the headrest bracket assembly. Failure to do so may result in head injury. • Make sure children are securely “belted in” while viewing CIOtv. While CIOtv is equipped with convenient touchscreen controls, smaller children may not be able to reach the screen. A remote control is provided for remote operati
Summary of the content on the page No. 5
What is Mobile Digital TV ? CIOtv is equipped with the latest in digital television technology. Just like your home television, your CIOtv television experience is digital. But that’s where the comparison stops. The CIOtv receiver can operate while you or your vehicle is in motion. The all new digital TV technology known as MDTV or ATSC-MH (mobile handheld) receives live TV from your local TV station at no additional cost. It’s free. TV anywhere….anytime. NOTE: MDTV is not available in all l
Summary of the content on the page No. 6
CIOtv Parts List The CIOtv Entertainment System consists of the following parts: 4 1. CIOtv 10.2” TFT Viewer (C-2510) 2. CIOtv AutoMount with wiring harness 3. Remote Control 4. IR Headphones (C-2510) 5. AV AUX Input Cable (C-2545) 6. Owner’s Manual 7. Four (4) ea. “AAA” batteries 5 8. CLA Power Cable (C-2535) with CLA Extension Cable (C-2540) (C-2545) (C-2540) 3 (C-2535) 1 2 8 5
Summary of the content on the page No. 7
These sensors control the 4 Red LED’s IR Receiver CIOtv operation. DO NOT block (IR Transmitter) (Infrared Remote Control) these sensors. Light Sensor Left Side View Right Side View Front Top of Viewer SD Card Slot iPod / iPhone DVD AUX Input Headphones DC Power In USB Ports Top View DVD Eject Power Button 6
Summary of the content on the page No. 8
CIOtv Optional Accessories: Available from www.winegard/ciotv.com 1. Battery Pack (C-2401) 2. 14V AC/DC Converter (C-2520) 3. iPod Accessory Cable (C-2530) 2 4. Factory Radio Cable (C-2201) (C-2520) 3 (C-2530) 1 (C-2401) (Used away from vehicle) 4 (C-2201) 7
Summary of the content on the page No. 9
Using Your CIOtv AutoMount CIOtv comes equipped with a convenient automotive headrest mounting system designed to fit a wide range of vehicle types and models. While Winegard makes no guarantee that the CIOtv will fit your vehicle, check the dimensions of your headrest posts before attempting to install the CIOtv AutoMount. CIOtv is designed to fit the following headrest post configurations: Headrest post diameters between 10mm and 14mm. Headrest post spread dimensions between 110mm and 170mm
Summary of the content on the page No. 10
AutoMount Openings for Bracket Headrest Posts Assembly AutoMount Clamp Assembly Release Tabs CIOtv AutoMount Assembly AutoMount Assembly with CIOtv Viewer NOTE: The AutoMount Bracket Assembly is designed Tools needed for assembly: to plug into the AutoMount Clamp Assembly. Depress 1. #1 Phillips head screwdriver both tabs at the front of the AutoMount Bracket Assembly and pull to release. 2. 3mm hex head key or hex head socket wrench 9
Summary of the content on the page No. 11
Getting Started Software Updates: CIOtv is an entertainment computer that depends on complex software to run and process the available audio and video options. To insure that you have the latest CIOtv software, refer to Setup/ System Information from the CIOtv Home Screen. Check the Firmware version against the latest version at www.winegard.com/ciotv If the Firmware version is different, you will want to update your CIOtv firmware. This will take a few minutes and will require a
Summary of the content on the page No. 12
5. The second and last step of the update process is the programming of the CIOtv internal memory with the data from the file that was loaded to the CIOtv in the first step. This will progress from the 0% to 100%. 6. When the update is complete, the screen will say “CIO update complete”. 7. Remove SD card and reboot the CIOtv unit using the power button. Power Up: CIOtv can be operated while mounted in your car on the CIOtv AutoMount bracket or as a hand-held device. When m
Summary of the content on the page No. 13
1. If installed in your vehicle, turn vehicle ignition to ACC (accessory) or Start the engine. CIOtv will operate in the ACC position but may deplete your vehicle battery unless the engine is running. 2. Press the POWER button on the upper top left corner of CIOtv. The Winegard logo will briefly appear and the CIOtv Home Screen will start. This should take about 20-25 seconds. You are now ready to operate your CIOtv. To shut off power, press the power button again. Note: When power is ava
Summary of the content on the page No. 14
• For External Audio through your car factory sound system, touch the FMM icon on the CIOtv Home Screen. Select “Enable FMM” and select an FM frequency from the available frequency drop down list (select a frequency that is not already being used by a local broadcast). Select Done. • For Wireless Headphones touch the headphones icon at the top of CIOtv Home Screen. Select Channel A or B. Select Done. On your wireless headphone set select either channel A or B to match the selection y
Summary of the content on the page No. 15
4. Select the video source icon of choice. You can always go back through the Home Screen menu or select the Home icon at the far left of the screen. If the Home icon disappears, simply touch the screen at any location (While video is playing, the icon will disappear after five seconds if not used). Caution: Always remember to check sound ! levels before putting on headphones or allowing use by children. Note: The volume control slider (vertical) located at the right of each vide
Summary of the content on the page No. 16
CIOtv Home Screen - Entertainment Options Tap an icon to select your entertainment option. See detailed operating instructions for each entertainment option below. Note: The status icons at the lower right corner of the CIOtv Home Screen will be highlighted when an iPod device is connected or a DVD disc or SD / USB media storage device is inserted. Remote Control Layout and Operation An IR sensor is located in the front panel of CIOtv. By simply pressing the remote buttons, you can contr
Summary of the content on the page No. 17
Home Screen Icons Power TV Channel Scan HOME FM Modulator TV TV Channel Recall Dash Subtitles DVD Menu iPOD TV Channel List Mute Directional Navigation Arrows AUX (Up/Down/Left/Right) Volume Up OK / Enter Volume Down DVD/CD Channel Up Channel Down Home Screen USB/SD Icons SET UP DVD Controls INTERNET 16
Summary of the content on the page No. 18
Using Mobile TV Select the TV icon from the CIOtv Home Screen. The TV screen will appear. If no channels appear on the station list, you will first need to scan for available TV channels in your area. Select the Channel Scan icon from the lower right corner. Channel scan usually takes several minutes to complete (you can cancel at any time by selecting channel scan stop). When the list of available channels appears, you can scroll up or down to select channels using either t Chan Dow
Summary of the content on the page No. 19
Note: The CIOtv on-screen control and playback feature may work with other or later versions of iPod and iPhone products. USB connection to CIOtv via the standard iPod/iPhone supplied cable may also support audio and video playback for a wider variety of models. Please refer to www.winegard.com/ciotv for a full listing of supported devices. You can connect your iPod or iPhone to CIOtv in several ways: 1. To fully utilize CIOtv’s iPod on-screen control and playback feature, connect using the
Summary of the content on the page No. 20
3. If you don’t have a special connector cable, you can always connect your iPod to CIOtv via one of the USB ports by using the standard 30 pin/USB connector cable supplied with your iPod or iPhone. Note: Using this option allows you to control your Apple device from the CIOtv Home Screen, however you will not have video playback capability. This option supports audio playback only. After connecting CIOtv using one of the previous options, you may now navigate and control your iPod. Select
