Summary of the content on the page No. 1
700IDT In-dash Touchscreen VGA LCD Monitor
Owner’s Records
The model and serial numbers are located on the rear of the unit. Please record these
numbers in the spaces provided below, as well as the dealer name, address, and
telephone number. Please refer to these records whenever speaking to your dealer
regarding this product.
Model # _______________________ Serial # ______________________
Dealer Name _________________________________________________
Street Address _____
Summary of the content on the page No. 2
NOTE NOTE 1: If you are trying to connect the monitor to a laptop computer, please make sure to enable the 15-Pin D-SUB external monitor output located at the back of your laptop computer. Some laptop computers have three modes: Laptop Display Only, Laptop Display plus External Monitor, and External Monitor Only. If this is the case, please switch to the External Monitor Only mode. NOTE 2: Touch Screen device driver must be installed onto your computer in order for the Touch Screen
Summary of the content on the page No. 3
8. Click Finish to finish the installation. You will be asked to restart your Package contents computer. 1 9. Remove the CD and Restart your computer. After Windows XP is finished loading, connect the 700TS or 700TSV USB cable to one of your computer’s 5 USB Ports. 3 10. Windows XP will start “Found New Hardware Wizard” automatically upon detection of the USB Touch Controller. Click on Next to continue. 2 4 11. Click on Next to continue. 1. 7” In-Dash Touch Screen moni
Summary of the content on the page No. 4
4. Select the Rotating Monitor Utility and/or the Shutdown Utility if you want to 7” In-Dash Touch Screen Monitor package contents install them and click on Next to continue. The Rotating Monitor Utility allows you to rotate your display while the Shutdown Utility provides you with one-click shutdown. 3 1 2 5. Click Next to accept the Destination Directory default, shown below. Click on Browse to change Destination Directory. 1. 7” In-Dash Touch Screen Monitor Main Unit 2. Trim
Summary of the content on the page No. 5
Connect signal source 2. Rear View Cable holder 1. Connect the 20-PIN connector on the black monitor cable to the back of the 700IDT. Route the cable through the dash to your PC. 2. Connect the D-Sub15 15-PIN VGA connector to your computer’s monitor output. 3. Connect the Yellow RCA plug labeled 1 and 2 to your composite video sources if required (e.g. Video Game console, Camera, DVD-Player, etc.) The white RCA plug labeled 3 is non-functional. 4. Connect the USB conn
Summary of the content on the page No. 6
0 4. Swivel Left/Right 15 Method one: Power the unit through Cigarette lighter: - Connect the power cable with one yellow wire, one red wire, and one black wire to the back of the 700IDT. Connect the Red and Yellow wires together and plug the cigarette lighter adaptor into your car’s cigarette lighter socket. Solder the Connecting the leads core wires to – Twist the Core connect them wires when connecting Caution: To prevent short – circuit, cover the terminals
Summary of the content on the page No. 7
External Buttons, Hot keys description: In-dash Monitor installation: Note1: The OSD Menu is only available when a video source is present. Note2: The Hot keys are only available while the OSD menu is off. 1 “M”– Stands for Menu. This button is for OSD menu on/off toggling. “S” – Stands for Select. Use this button for selection while OSD menu is on. Use this button as a hot key to switch video channel directly when OSD menu is off, following this rotation: VGA ->Video1 -
Summary of the content on the page No. 8
Default Electrical Characteristics: - Load default setting. Absolute Maximum Ratings: Parameter Symbol Min Max Unit AV2 First - Set whether to have monitor switch to Video Input 2 automatically if a signal Analog Signal Input Level Signal 0 1.4 Vp-p is present. Good for car reverse monitoring system. Power Supply DC IN 11 24 V Scaler Digital Signal Input Level - - 5+0.3 V - Set the display mode to 16:9 or 4:3. Set it to 4:3 if your video signal is in 4:3 Operation Temperature
