Summary of the content on the page No. 1
Content Server
User Manual
Software version S1
D1389801
This document is not to be reproduced in whole or in part without permission in writing from:
Summary of the content on the page No. 2
TANDBERG Content Server User Manual Trademarks and Copyright All rights reserved. This document contains information that is proprietary to TANDBERG. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, electronically, mechanically, by photocopying, or otherwise, without the prior written permission of TANDBERG. Nationally and internationally recognized trademarks and trade names are the property of their respectiv
Summary of the content on the page No. 3
User Manual WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING ,BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT( INCLUDING NEGLIGE
Summary of the content on the page No. 4
TANDBERG Content Server User Manual Environmental Issues Thank you for buying a product, which contributes to a reduction in pollution, and thereby helps save the environment. Our products reduce the need for travel and transport and thereby reduce pollution. Our products have either none or few consumable parts (chemicals, toner, gas, paper) and low energy consuming products. Waste handling There is no need to send any products or material back to TANDBERG as there are no cons
Summary of the content on the page No. 5
User Manual Operator Safety Summary For your protection, please read these safety instructions completely before operating the equipment and keep this manual for future reference. The information in this summary is intended for operators. Carefully observe all warnings, precautions and instructions both on the apparatus and in the operating instructions. Equipment Markings The lightning flash symbol within an equilateral triangle is intended to alert the user to the presence
Summary of the content on the page No. 6
TANDBERG Content Server User Manual Servicing - Do not attempt to service the apparatus yourself as opening or removing covers may expose you to dangerous voltages or other hazards, and will void the warranty. Refer all servicing to qualified service personnel. Damaged Equipment - Unplug the apparatus from the outlet and refer servicing to qualified personnel under the following conditions: When the power cord or plug is damaged or frayed If liquid has been spilled or objects have f
Summary of the content on the page No. 7
User Manual Contact us If you have any questions, comments or suggestions, please see the Online Support service at www.tandberg.net It is also possible to send a fax or mail to the attention of: Product and Sales Support TANDBERG P.O. Box 92 1325 Lysaker Norway Tel: +47 67 125 125 Fax: +47 67 125 234 vii
Summary of the content on the page No. 8
TANDBERG Content Server User Manual End-User License Information IMPORTANT: THE USER MANUAL CD FOR THIS PRODUCT CONTAINS IMPORTANT TERMS AND CONDITIONS INCLUDING END USER LICENSE AGREEMENTS. THE LICENSE AGREEMENTS SHOULD BE READ PRIOR TO USE. USE OF THIS PRODUCT CONSTITUTES ACCEPTANCE OF THE TERMS OF THE LICENSES. viii
Summary of the content on the page No. 9
User Manual Table of Contents End-User License Information....................................................................................................... viii 1 Introduction............................................................................................................................... 1 2 Installation ................................................................................................................................ 2 2.1 Unpacking ....................
Summary of the content on the page No. 10
TANDBERG Content Server User Manual 5.2 Editing Conferences............................................................................................................. 68 5.2.1 Slide List .................................................................................................................. 70 5.2.2 Media URL List ........................................................................................................ 71 5.2.3 Content Editor........................................
Summary of the content on the page No. 11
1 Introduction The TANDBERG Content Server is the latest addition to the TANDBERG product range which provides users with a quick and easy way to record video meetings and view them live or on- demand from their computers. Features at a glance: Large scale content creation from multiple concurrent video meetings Live streaming of video meetings in multiple formats and data rates Multicast and unicast streaming In-built Windows Media™ streaming server Integration
Summary of the content on the page No. 12
TANDBERG Content Server User Manual 2 Installation Precautions: Never install communication wiring during a lightning storm. Never install jacks for communication cables in wet locations unless the jack is specifically designed for wet locations. Never touch uninstalled communication wires or terminals unless the communication line has been disconnected at the network interface. Use caution when installing or modifying communication lines. Avoid using communication equipm
Summary of the content on the page No. 13
2.1 Unpacking To avoid damage to the unit during transportation, the Content Server is delivered in a special shipping box, which should contain the following components: User Manual and other documentation on CD. Rack-ears, screws and screwdriver. Cables: o Power cable o Ethernet cable TANDBERG Content Server Installation site preparations Make sure that the Content Server is accessible and that all cables can be easily connected. For ventilation: Leave a space o
Summary of the content on the page No. 14
TANDBERG Content Server User Manual 4. Insert the Content Server into a 19” rack, and secure with screws in the front (four screws). 2.2 Connecting cables LAN cable Connect a LAN cable from the ‘LAN 1’ connector on the Content Server to your network. The LAN 2, 3 and 4’ connectors are not used and should be left open. Power cable Connect the system power cable to an electrical distribution socket. Press the power switch button at the back side to ‘1’ to turn on the Conte
Summary of the content on the page No. 15
2.3 IP Address Setting Configuration The Content Server requires the IP Address Settings to be configured before it can be used. IP Address Configuration can be made using the LCD Panel. The default IP Address configuration is DHCP. It is recommended that administrators change the configuration to a Static IP address once the server is in production. Front view of the Content Server with the LCD panel: LCD Panel buttons and their functions: Up and Down Used to sele
Summary of the content on the page No. 16
TANDBERG Content Server User Manual 5. Press Enter again at the Address Type screen and select the required configuration (DHCP or Static) by using the Up or Down arrows. 6. Press Enter to confirm. 7. If you have selected Static configuration, go to Section 2.3.2 Static IP configuration. If you have selected DHCP configuration, go to Section 2.3.3 Content Server configuration. 2.3.2 Static IP configuration: The LCD panel allows you enter the IP address of the server, Subnet Mask and D
Summary of the content on the page No. 17
3. To configure the Content Server, go to the Administrator Settings to set the H.323 system alias and E.164 aliases for each line. For details, see the Administrator Setings chapter of this manual. 4. Once the initial setup has been completed, log in to https://:8098/ and use the Set Administrative Password tool to change your administrative password. 2.3.4 User configuration The TANDBERG Content Server can be added to an existing domain to take adva
Summary of the content on the page No. 18
TANDBERG Content Server User Manual 2.3.5 QuickTime installation Read this section only if you require calls to be recorded and streamed in the NOTE: ® QuickTime format. If you will be recording calls in two formats only - Windows Media and Real Media, you do NOT need to install QuickTime on the server. QuickTime can be installed and enabled on the Content Server at any time, so you can defer this installation until (and if) it is required. The Content Server ships with QuickTi
Summary of the content on the page No. 19
Line 1 or Codec Support section for Archiving Lines 2-5). Remember to click the Save button to confirm the changes. 13. Attach Recording and Streaming Templates with QuickTime outputs to Lines 1-5 to take advantage of the QuickTime output functionality and record your content for on demand QuickTime playback. Example: select QuickTime 6 Default Template - QT6-Default.xml* from the drop- down menu in the Template Options section of Line Settings for Transcoding Line 1. Click Save.
Summary of the content on the page No. 20
TANDBERG Content Server User Manual 3 General Use TANDBERG Content Server The Content Server will always be turned on and be available to record conference calls. The unit itself should not be available to users at anytime. If the system does not respond: Check the LCD panel to determine if the unit is switched on and ‘live’. Make sure that the Content Server is switched on by using the On/Off switch located at the rear of the unit. Restart the Content Server using
