Summary of the content on the page No. 1
15” TFT LCD MONITOR
USER MANUAL
Model: GMTV15
CONTENT:
1. Unpacking
2. Specification
3. Important Safety Instructions
4. Installation and Connection
5. Front Panel Controls
6. OSD Controls
7. Trouble Shooting
Summary of the content on the page No. 2
Unpacking Our 15” LCD TV shall be content with following items. Make sure you get all there set ready, otherwise please contact with your dealer or the store where you purchased from. And if it still doesn’t work, please feel free to contact us. Please keep the packing parts ( such as the box and the foam…) precisely, that would provide protection just for once if you need to send the fault product back for repairing.
Summary of the content on the page No. 3
15” TFT LCD TV Power Cord ADAPTER TECH External Universal AC Adapter (100v-240v, 50/60Hz) User Manual Signal and power in integrated box (This parts only for Momentum T3, T5, T7 serials and T480 serials ) M5 × 10mm bolt 2pcs For fix both extra speaker Extra Speaker (option) Head Set (option) Remote Control (option)
Summary of the content on the page No. 4
Specification LCD Panel Type 15.0” XGA Color TFT-LCD Display Viewing Angle H:65 ° ° ° ° V:65 ° ° ° ° Contrast Ratio 500 : 1 (Type) Response Time 12ms Display colors 16.2M colors Pixels H × × × × V 1024( × × × ×3) × × × × 768 Pixel Pitch 0.297mm(per one triad) × × × ×0.297mm Input Signals Video in Auto Detect NTSC/PAL interlaced video with input format of Composite video (AV) NTSC or PAL- B/G, D/K, L/L ANT* Connector Video in RCA - Jack Audio in RCA – Jack (L/R) ANT* RF Tuner PH Type terminal Po
Summary of the content on the page No. 5
Important Safety Instructions 1. Read instructions – Please make sure the instruction has been read and understood before starting using. 2. Keep this manual precisely – Please keep the manual well just for once if you need it as future reference. 3. Check warnings – Please check the warnings both on the product and in the manual. 4. Follow the instructions – All the operating instructions must be followed. 5. Attachments – Do not use attachments which has never be recommended by the manufacture
Summary of the content on the page No. 6
Installation and Connection Type A: 1. Use pill. driver and 5mm allen 2. After installed TV support then 3. Use pill. driver move out cover wrench move out both L and R cables penetrate into the hole. on base frame. ahead fix on treadmill parts. 4. Pull two cable then connect on 5. Achievement diagram. the input signal and power box then use original 2 bolts to fix. Type B: 1. Use pill. driver and 5mm allen wrench as same as type ahead fix on treadmill parts.
Summary of the content on the page No. 7
TV install: 1. Attachment cable and installation both speakers with M5 ×10 2 bolts. (Optional) 2. Then put TFT TV bracket on support base with M6 ×10 2 bolts. 3. Connect DC in, TV cable, Video, Audio L and R. DC Video Audio Cable L R 4. Plug the power cord into the wall outlet, and the other end of the power cable into the Adapter AC socket then plug the other end of Adapter the power input of the back of LCD monitor. 5. Power on, turn on the Power Switch of your LCD monitor.
Summary of the content on the page No. 8
Front Panel Controls 6 5 4 3 2 1 1. Power Switch: To switch on/off device. 2. Power LED: To display DC power in. 3. Channel up and down: To select TV program channel. 4. Volume up and down: To adjust speaker or earphone volume. 5. Remote: To receive remote control signal. 6. TV/AV: To select TV channel and AV input.
Summary of the content on the page No. 9
OSD Controls 1 2 3 1. Main Menu: To enter / to select item. 2. Adjust (decrease/down): To adjust the decreasing value / to adjust decreasing item. 3. Adjust (increase/up): To adjust the increasing value / to adjust increasing item. OSD Operation:
Summary of the content on the page No. 10
1. Display OSD information: Press SELECT button to show main menu, use + and – to select, then press SELECT button to enter. 2. Brightness: Use + and – button adjust the brightness then press SELECT button to execute and exit. 3. Contrast: Use + and – button adjust the brightness then press SELECT button to execute and exit. 4. Color: Use + and – button adjust the color then press SELECT button into select Red, Green, Blue select menu, select one of 3 color menu then press SELECT button to
Summary of the content on the page No. 11
Trouble Shooting 1. No picture and sound : Is the power cable plugged? Confirm the connection of SPEAKER or AUDIO cable. Components connection status checking. 2. Picture only, no sound : Confirm the connection of AUDIO cable. Confirm the volume. 3. No power : Please confirm the device is correctly connected to the AV power cable. Is the POWER button pressed on the remote control? AC power cable removed form plug? Is the main switch on device on? 4. Failure to operate device : Strong lighting so