Summary of the content on the page No. 1
KVT-532DVD
KVT-532DVDM
MONITOR WITH DVD RECEIVER
INSTALLATION MANUAL
© B54-4642-00/00 (MW/M2W/XW)
Summary of the content on the page No. 2
Accessories 1 ..........1 2 ..........1 3 ..........2 4 ..........1 5 ..........4 6 ..........4 | 2 KVT-532DVD/KVT-532DVDM
Summary of the content on the page No. 3
Installation Procedure • When only two speakers are being connected to the 1. To prevent a short circuit, remove the key from the system, connect the connectors either to both the front ignition and disconnect the - battery. output terminals or to both the rear output terminals (do 2. Make the proper input and output wire not mix front and rear). For example, if you connect the + connections for each unit. connector of the left speaker to a front output terminal, do 3. Connect the speaker
Summary of the content on the page No. 4
Connecting Wires to Terminals Ignition key USB device switch USB connector (commercially available) ACC Ignition wire (Red) Battery wire (Yellow) Car fuse box Car fuse box If you connect the ignition wire (red) and (Main fuse) the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that Ground wire (Black)- (To car chassis) in turn may start a fire. Always connect those wires to the power source running through the fuse box. Battery FUSE ( 15A ) Connect to t
Summary of the content on the page No. 5
Cooling fan Antenna Cord Do not connect. FM/AM antenna input Wiring harness (Accessory 1) Audio/Visual input / Rear View Camera Input • Visual input (Yellow) AV IN Wiring harness • Audio left input (White) (Accessory 2) • Audio right input (Red) REAR VIEW CAMERA Audio/Visual Output • Visual output (Yellow) REVERSE • Audio left output (White) AV OUT • Audio right output (Red) ILLUMI Rear/Subwoofer Preout REAR/SUB • Audio left output (White) REMO.CONT WOOFER • Audio right output (Red) Front Preout
Summary of the content on the page No. 6
iPod AUDIO IN Optional Accessory Connection iPod (commercially available) KCA-iP300V (Optional Accessory) Audio Input Resistance-free stereo type mini plug (3.5Ф) Audio Output (Black) Visual Input (Yellow) Resistance-free mini plug (3.5Ф) Visual Output (Yellow) USB terminal USB terminal KCA-BT200 input (Optional Accessory) Connection cable (Included in the Navigation System) TV Tuner (Optional Accessory) Navigation System (Optional Accessory) Connection cable (Included in the TV tuner) | 6
Summary of the content on the page No. 7
Installation/Removing the Unit Installation Firewall or metal support Screw (M4X8) (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw Metal mounting strap (commercially available) (commercially available) Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). | English 7
Summary of the content on the page No. 8
Installation/Removing the Unit Removing the Hard Rubber Frame Removing the Unit (escutcheon) 1. Remove the hard rubber frame by referring to the removal procedure in the section . remove the two locks on the lower level. 2. Remove the Hex-head screw with integral washer Lower the frame and pull it forward as shown in (M4 × 8) on the back panel. the figure. 3. Insert the two removal tools 3 deeply into the Es
Summary of the content on the page No. 9
Installing in Japanese-made Cars Installation on Toyota, Nissan or Mitsubishi Car using Brackets at Holes shown by "●" or Accessory 5 (M5x6mm) or Accessory 6 (M5x7mm) Car Bracket Accessory 5 (M5x6mm) or Accessory 6 (M5x7mm) Screws (included in audio unit package) Screws (included in audio unit package) Audio unit or others ⁄ • Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. | English 9
Summary of the content on the page No. 10
Installing in Japanese-made Cars Installation on Toyota Car using Brackets at Holes shown by "●" or When using the bracket shown above, you cannot use screws at two holes of the right and left unit sides. 1. Mount the bracket at each side. Car Bracket Accessory 5 (M5x6mm) Accessory 5 (M5x6mm) Screws (included in audio unit package) Screws (included in audio unit package) 2. Bend each end of case to fix the bracket. Use a flat-blade screwdriver or pliers, and bend each case tab into the ho
Summary of the content on the page No. 11
Summary of the content on the page No. 12
1 ..........1 2 ..........1 3 ..........2 4 ..........1 5 ..........4 6 ..........4 | 12 KVT-532DVD/KVT-532DVDM
Summary of the content on the page No. 13
- - 2 € + - | 13
Summary of the content on the page No. 14
ACC - PRK SW | 14 KVT-532DVD/KVT-532DVDM – +
Summary of the content on the page No. 15
( 1) • ( 2) AV IN • REAR VIEW • CAMERA REVERSE • AV OUT • • ILLUMI REAR/SUB REMO.CONT • WOOFER • FRONT • MUTE • + ANT CONT + P. CONT + + | 15 REAR R REAR L FRONT R FRONT L
Summary of the content on the page No. 16
iPod AUDIO IN KCA-iP300V (Optional Accessory) ) | 16 KVT-532DVD/KVT-532DVDM TO MONITOR UNIT TV ANTENNA INPUT
Summary of the content on the page No. 17
| 17
Summary of the content on the page No. 18
3 4 3 3 3 ⁄ • ⁄ • | 18 KVT-532DVD/KVT-532DVDM
Summary of the content on the page No. 19
"●" 5 6 5 6 ⁄ | 19
Summary of the content on the page No. 20
"●" 5 5 | 20 KVT-532DVD/KVT-532DVDM
