Summary of the content on the page No. 1
ADV10A
10.1" OVERHEAD LCD
MONITOR WITH
DVD PLAYER
OPERATION
MANUAL
R
128-8933a
Summary of the content on the page No. 2
Important Notice Installation of overhead products requires careful planning and preparation. Be extremely careful when working on a vehicle with side curtain air bags. Do not route wires near any portion of the side curtain air bag assemblies. This includes any anchor points in A, B, C or D pillars of the vehicle. Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fully deploying which can result in personal injury to vehicle occ
Summary of the content on the page No. 3
FEATURES Congratulations Congratulations on your purchase of the ADVENT ADV10A � 10.1” TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor with LED Backlighting DVD Player with drop-down video / monitor. TheADV10Ahas been designed to give you and your family many years of � Built-in DVD Player video entertainment in the mobile environment. Please read � OSD (On Screen Display) for Control of Picture Quality the directions that follow to familiarize yourself with the and
Summary of the content on the page No. 4
CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) 1 4. PLAY () Control 2 This control is used to start playback of a disc. 5. STOP () Control 3 - Press STOP once: Stops playback, 4 5 Pressing the PLAY button again will resume normal 6 playback from where movie was stopped. 7 - Press STOP twice and then press PLAY to start playback from the beginning of the DVD. 8 9 6. EJECT () Control This control is used for ejecting disc from the disc compartment. 10 7. Three Position Dome Light Switch ON - Turn
Summary of the content on the page No. 5
CONTROLS AND INDICATORS DIAGRAM SIDE VIEW 1 The ADV10A has an option that allows the user to select from two IR transmit and receive codes (M1 or M2). This feature can be used when using two ADV10As in the same installation or if the vehicle has a RSA (Rear Seat Audio) that uses an “A” channel headset. The ADV10A comes factory set to M1. When in the M1 mode, the unit will respond to remote commands when M1 is selected on the remote control and will transmit audio on the A channel. When in the M2
Summary of the content on the page No. 6
REMOTE CONTROL OPERATION MAIN FUNCTION OPERATION Initial Use When purchased the remote control has a battery installed with a Pull Tab to prevent battery discharge. Remove the Pull Tab before POWER EJECT attempting to use the remote. M1 M2 1 30 2 SOURCE TV DVD MUTE 29 3 4 28 DVD SOURCE VOLUME PIX 5 27 6 SYSTEM MENU DISC MENU ZOOM 7 26 25 8 REPEAT ENTER 24 9 DISPLAY SETUP SUBTITLE 23 10 22 AUDIO CR2025 11 21 12 20 13 19 14 18 12 3 4 15 56 7 8 Battery Replacement FMM IRT 1. Remove the battery hold
Summary of the content on the page No. 7
* Function control is available on the unit and the Remote Control. ** Function not available in this model. 1. POWER* Press this button to turn the unit ON and OFF. 2. MONITOR SELECT M1 Button – Set the remote control code to allow control of the unit in M1 mode. M2 Button** – Set the remote control code to allow control of the unit in M2 mode. 3. SOURCE* Each time the button is pressed, the unit will cycle through modes DVD, AV1/AUX. Note: When a video device is plugged into the AUX jack on th
Summary of the content on the page No. 8
9. ENTER Used to implement a selected setting or menu option. 10. DISPLAY Press to display the current disc information while the disc is playing. Press the cursor () buttons to select the Title or Chapter. For Title/Chapter selection use the numeric buttons to enter the desired Title /Chapter selection. 11. SCAN BACKWARD () Press to search in a backward direction. Press repeatedly to change the search speed from 2, 4, 8, 16 times and normal speed. 12. PLAY ()* Press to activate the play mod
Summary of the content on the page No. 9
19. STOP ()* Press to stop playback. (Playback will resume from the point it is stopped). Press twice at once to stop playback fully. (Playback will resume from the beginning of the disc). 20. SCAN FORWARD () Press to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8, 16 times and normal speed. 21. AUDIO Press to display and select audio language in DVD mode. Each time you press the button, the language changes. Note: The available languages vary from disc
Summary of the content on the page No. 10
26. ZOOM Press this button to enlarge the picture when playing a DVD disc. Press ZOOM button DVD player perform Once Q1- Enlarge the picture 2 times of the original size Second Q2- Enlarge the picture 3 times of the original size Third Q3- Enlarge the picture 4 times of the original size Forth Q off- Picture is returned to original size 27. VOLUME DOWN (-) or UP (+) Press to decrease or increase the volume. Press to decrease or increase the level of the picture adjustments after the picture sele
Summary of the content on the page No. 11
TURNING THE UNIT ON OR OFF 1. Push in the Screen Release button to unlock the LCD screen. The screen will drop down slightly. 2. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use. 3. Press the power button on the unit or the remote control to turn the system on and off. When in use, the internal backlighting will illuminate the controls. 4. After the unit has been turned on and is displaying a pi
Summary of the content on the page No. 12
SYSTEM MENU SETTINGS AND ADJUSTMENTS The System Menu contains features and options that let you customize your system. For example, you can change the screen mode display, OSD language, and source default. Using the System Menu 1) Press the TV button and then the SYSTEM MENU button on the remote. The main page of the system menu will appear on screen. 2) Use the cursor buttons or to select the desired item in the main page and press the ENTER button to select. 3) The submenu will appear on scr
Summary of the content on the page No. 13
FMM The FM Modulator allows the user to listen to audio through the vehicle’s radio. FMM ON - Turns the wireless FM Modulator on if audio playback through your vehicle’s radio is preferred. FMM OFF - Turns the wireless FM Modulator off. FMM SELECT - Selects the wireless FM Modulator Frequency (CH1 - 88.1MHz, CH2 - 88.3MHz, CH3 - 88.5MHz, CH4 - 88.7MHz, Ch5 - 88.9MHz, Ch6 - 89.1MHz, CH7 - 89.3MHz, CH8 - 89.5MHz, CH9 - 89.7MHz, CH10 - 89.9MHz, CH11 - 90.1MHz, CH12 - 90.3MHz, CH13 - 90.5MHz, CH14 -
Summary of the content on the page No. 14
� � OSD LANGUAGE This function allows the user to select the on-screen display language. SYSTEM MENU OSD LANGUAGE ENGLISH The user can select English, Spanish, French or German for the OSD PICTURE CONTROL FMM SPANISH language. OSD LANGUAGE FRENCH SOURCE DEFAULT DVD GERMAN SCREEN MODE SOURCE DEFAULT DVD This allows the user to set the system default source to DVD. SYSTEM MENU SOURCE DEFAULT DVD ON PICTURE CONTROL Notes: FMM OFF If source default is set to ON, every time the unit is turned off the
Summary of the content on the page No. 15
DVD SETUP MENU SETTINGS AND ADJUSTMENTS The DVD Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the on-screen display or prevent children from viewing DVD playback of adult DVD Titles. Using the Setup Menu 1. Press the DVD button and then the SETUP button on the remote. The Setup Menu appears on the Language OSD Language : English screen as shown per diagram. Subtitle : Off Video 2. Use the or cursor buttons to highlight
Summary of the content on the page No. 16
DVD SUBTITLE SETUP 1. Select "SUBTITLE" using the button, then press the button to enter the submenu. Language OSD Language English 2. Select the subtitle you desire using the button, then press “ENTER” to confirm the setting. French Subtitle Video Spanish 3. Press the button to return. German Rating Audio Note: The subtitle selection is only available for discs that are recorded in the above listed languages. If the selected, Italian Chinese Misc language is not available, the player will
Summary of the content on the page No. 17
DVD RATING SETUP Parental This item allows you to limit the content of movie playback from G toAdult. The lower the value, the more strict the control. 1. G 2. PG 3. PG – 13 4. R 5. NC – 17 6.Adult The rating level can only be changed when the correct password is provided. Language Parental : 6.Adult For first time use to change parental control: Video Change Password 1. Use the cursor button to enter parental mode. Rating 2. Key in the default password (3308) and press ENTER. Misc 3. Press the
Summary of the content on the page No. 18
Load Factory This option allows you to reset all options to factory settings. Load Factory Language Note: This function will not affect the Rating control settings. Load Factory Screen Saver Video Yes No Rating Misc Screen Saver This option allows you to set the Screen Saver mode. Load Factory Language ON - Screen saver will appear Off Screen Saver Video OFF - Screen saver will not appear Rating On Note: The DVD player will enter Screen Saver mode if the unit is inactive for approximately 2 minu
Summary of the content on the page No. 19
PLAYING MP3 DISCS MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on DVD player. The DVD player plays the songs in the order they were burned on to the disc. When playback is started the elapsed time of the track that is playing will be displayed. Selecting Folders and Songs When a device containing MP3 files is
Summary of the content on the page No. 20
Repeat: play repetitively 00:00:01 Repeat function has 4 options : Off, Single, Folder, All. Move cursor to Repeat function and press ENTER, 1/12 / Flat Mode Each time ENTER is pressed the unit will cycle through the available options. Off/Single/Folder/All are 001 Repeat : Off 002 displayed in that order. Repeat default is Off. Mode : Normal 003 004 005 Music Playing Off - Turn off repeat function. 006 Single - Repeat the song being played until STOP is pressed. Folder - Play all songs in a fol
