Our goal is to provide you with a quick access to the content of the user manual for Kenwood KDC-136. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Kenwood KDC-136.
For your convenience
If looking through the Kenwood KDC-136 user manual directly on this website is not convenient for you, there are two possible solutions:
Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Kenwood KDC-136 on full screen, use the button Fullscreen.
Downloading to your computer - You can also download the user manual Kenwood KDC-136 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Kenwood KDC-136 but the selected pages only. paper.
Summaries
Below you will find previews of the content of the user manuals presented on the following pages to Kenwood KDC-136. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Contents Safety precautions 3 Accessories/ Installation Procedure 14 Notes 4 Connecting Wires to Terminals 15 General features 5 Installation 16 Power Selecting the Source Troubleshooting Guide 18 Volume Attenuator Specifications 19 Audio Control Audio Setup Bass Boost Speaker Setting Clock Display Subwoofer Output Theft Deterrent Faceplate TEL Mute Tuner features 8 Tuning Tuning Mode Station Preset Memory Auto Memory Entry Preset Tuning Frequency Step Setting CD player features 10 Playing CD F
Summary of the content on the page No. 3
Safety precautions Lens Fogging 2WARNING When you turn on the car heater in cold weather, To prevent injury or fire, take the following dew or condensation may form on the lens in the precautions: CD player of the unit. Called lens fogging, this • To prevent a short circuit, never put or leave any condensation on the lens may not allow CDs to play. metallic objects (such as coins or metal tools) inside In such a situation, remove the disc and wait for the the unit. condensation to evapora
Summary of the content on the page No. 4
Notes • If you experience problems during installation, The marking of products using lasers consult your Kenwood dealer. (Except for some areas) • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work CLASS 1 with your model and in your area. LASER PRODUCT • Characters in the LCD may become difficult to read in temperatures below 5 ˚C (41 ˚F). The label is attached to the chassis/case and says • The illustrations of the display and the panel
Summary of the content on the page No. 5
General features Release button Control knob Clock display ATT indicator Power Volume Turning ON the Power Increasing Volume Press the [SRC] button. Turn the [VOL] knob clockwise. Turning OFF the Power Decreasing Volume Press the [SRC] button for at least 1 second. Turn the [VOL] knob counterclockwise. Selecting the Source Attenuator Turning the volume down quickly. Press the [SRC] button. Press the [ATT] button. Source required Display Each time you press the button, the Attenuator Tuner "
Summary of the content on the page No. 6
General features Audio Control Audio Setup Setting the Sound system, such as Volume offset. 1 Select the source to adjust Press the [SRC] button. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Control mode Press the [VOL] knob. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio item to adjust Press the [VOL] knob. 3 Select the Audio Setup item to adjust Each time you press the knob, the item to be Press the [VOL] knob. adjusted alternate
Summary of the content on the page No. 7
Removing the Faceplate Speaker Setting Press the Release button. Fine-tuning so that the System Q value is optimal The faceplate unlocks, allowing you to detach it. when setting the speaker type. € 1 Enter Standby • The faceplate is a precision piece of equipment and can Press the [SRC] button. be damaged by shocks or jolts. • Keep the faceplate in its faceplate case while detached. Select the "STBY" display. • Do not expose the faceplate (and the faceplate case) to 2 Enter Speaker Setting m
Summary of the content on the page No. 8
Tuner features Control knob Band display Frequency display AUTO indicator ST indicator Preset station number CRSC indicator Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time you press the button, the Tuning mode Press the [SRC] button. alternates between the modes shown in the table Select the "TUnE" display. below. 2 Select the band Tuning mode Display Operation Push the Control knob towards [FM] or [AM]. Auto seek "
Summary of the content on the page No. 9
Station Preset Memory Frequency Step Setting Putting a station in the memory. Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM 1 Select the band band 9 kHz. Push the Control knob towards [FM] or [AM]. 1 Turn the power OFF 2 Select the frequency to put in the memory Press the [SRC] button for at least 1 second. Push the Control knob towards [4] or [¢]. 2 Switch the frequency step 3 Put the frequency in the memory While pressing the [1] and [5] buttons, press the
Summary of the content on the page No. 10
CD player features Control knob RDM indicator REP indicator SCN indicator Track number IN indicator Track time Playing CD Fast Forwarding and Reversing When a disc is inserted Fast Forwarding Press the [SRC] button. Hold down toward [¢] with the Control knob. Select the "CD" display. Release to resume the playback. ⁄ Reversing • When a CD is inserted, the "IN" indicator is ON. Hold down toward [4] with the Control knob. Release to resume the playback. Pause and play Press the Control knob.
Summary of the content on the page No. 11
Track Search Selecting the song you want to hear. Push the Control knob towards [4] or [¢]. Track Repeat Replaying the song you are listening to. Press the [REP] button. Each time you press the button, the Track Repeat turns ON or OFF. When the Track Repeat is ON, the "REP" indicator is ON. Scan Play Playing the first part of each song on the disc you are listening to and searching for the song you want to hear. 1 Start Scan Play Press the [SCAN] button. "SCN" indicator is ON. 2 Release it w
Summary of the content on the page No. 12
Menu system Control knob Menu display Menu System 4 Exit Menu mode Press the [MENU] button. Setting beep sound during operation, etc. ⁄ functions. The Menu system basic operation method is • When other items those applicable to the basic operation method above are displayed, their setting explained here. The reference for the Menu items content chart is entered. (Normally the setting listed at and their setting content is after this operation the top of the chart is the original setting.
Summary of the content on the page No. 13
In Standby mode In FM reception Manual Clock Adjustment CRSC (Clean Reception System Circuit) Temporarily have reception alternate from stereo to 1 Select Clock Adjustment mode mono to reduce multi-path noise when listening to Push the Control knob towards [FM] or [AM]. the FM station. Select the "CLCK" display. Display Setting 2 Enter Clock Adjust mode "On CRSC" The CRSC is ON. Press the Control knob for at least 1 second. "OFF CRSC" The CRSC is OFF. The clock display blinks. 3 Adjust the hou
Summary of the content on the page No. 14
Accessories/ Installation Procedure Accessories Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 1 2. Make the proper input and output wire connections for each unit. ..........1 3. Connect the speaker wires of the wiring harness. 4. Connect the wiring harness wires in the following order: ground, battery, ignition. 2 5. Connect the wiring harness connector to the unit. 6. Install the unit in your car. ..........2 7. Reconnec
Summary of the content on the page No. 15
Connecting Wires to Terminals Rear left output / Sub Woofer left output (White) Rear right output / Sub Woofer right output (Red) FM/AM antenna input Fuse (10A) Wiring harness If no connections are made, do not let the wire come out from the tab. (Accessory1) When using the optional power amplifier, Power control wire (Blue/White) connect to its power control terminal. P.CONT Depending on what antenna you are using, connect either to the control Motor antenna control wire (Blue) terminal of
Summary of the content on the page No. 16
Installation non-Japanese cars Japanese cars 1 Refer to the section and then remove the hard rubber frame. 2 Align the holes in the unit (two locations on each Firewall or metal support side) with the vehicle mounting bracket and secure the unit with the accessory screws. T N T/N N T T: Toyota cars N: Nissan cars Bend the tabs of the mounting sleeve with a screwdriver or similar utensil 8 mm and attach it in pla
Summary of the content on the page No. 17
Removing the hard rubber frame Screwing the Faceplate on the Unit If you want to fasten the faceplate to the main unit 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. so that it does not fall off, screw in the provided Upper the frame and pull it forward as shown in screws in the holes shown below. the figure. Accessory5 Lock Catch Accessory2 Removal tool 2 When the upper level is removed, remove the lower two locations. € ⁄ • Never insert the screw
Summary of the content on the page No. 18
Troubleshooting Guide Some functions of this unit may be disabled by The messages shown below display your some settings made on this unit. systems condition. E-04: The CD is quite dirty. The CD is upside-down. ! Cannot display the user of System Q. The CD is scratched a lot.
Summary of the content on the page No. 19
Specifications Specifications subject to change without notice. FM tuner section Audio section Frequency range (50 kHz space) Maximum output power : 87.5 MHz – 108.0 MHz : 45 W x 4 Frequency range (200 kHz space) Full Bandwidth Power (at less than 1% THD) : 87.9 MHz – 107.9 MHz : 22 W x 4 Usable sensitivity (S/N = 30dB) Speaker Impedance : 9.3dBf (0.8 μV/75 Ω) : 4 – 8 Ω Tone action Quieting Sensitivity (S/N = 50dB) Bass : 100 Hz ±8 dB : 15.2dBf (1.6 μV/75 Ω) Middle : 1 kHz ±8 dB Frequenc
