Summary of the content on the page No. 1
OPERATING
INSTRUCTIONS
FXCD-550
Full Panel Detachable
FM Stereo/AM Receiver
Auto Reverse Cassette Player
Compact Disc Player
ISO Mounting with Removable Trim Ring
(English)
GB
OPERATING INSTRUCTIONS. . . . . . . . . . . . . . . . . . . 1~25
(Español)
LIBRITO DE INSTRUCCIONES . . . . . . . . . . . . . . . . . 26~49 E
Summary of the content on the page No. 2
SANYO MOBILE AUDIO MODEL FXCD-550 LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Factory Service Center at the user's expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Center may be obtained by calling the toll-free number listed below. For product operation, authorized service center referral, service assistance or problem resolution, call
Summary of the content on the page No. 3
English CONTENTS COMPACT DISC CARE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 DIGITAL DISPLAY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DETACHABLE FRONT PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 GENERAL OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
COMPACT DISC CARE Dirt, dust, scratches and warpage can cause a deterioration in the sound or intermittent skipping some tracks during play. This unit has been designed to play compact discs bearing the identification logo shown on the left. Discs bearing other types of identification logos may not play properly. Playback may not be possible due to the characteristics of the CD recorder or the CD-R/RW used, or due to scratches or dirt on the CD. For some CD-R/RWs, depending on the qual
Summary of the content on the page No. 5
Never use chemicals such as record cleaning sprays, antistatic sprays or fluids, benzene or thinner to clean compact discs. These chemicals will permanently damage the plastic surface of the disc. When not using the disc player for extended periods, remove the compact disc and return it to Benzene Thinner Cleaning spray the plastic storage case. This will protect the disc from dust and exposure to the sun. Mixed-mode CDs This product can only play audio tracks on mixed-mode CDs. The
Summary of the content on the page No. 6
DIGITAL DISPLAY Automatic Music Select System (AMSS) Metal Display Tape playing direction BASSXPANDER Auto Travel Preset (ATP) Disc in AM Band Radio Frequency, Time, Preset Channel, FM Bands CD Track Number, Auto Travel Audio Control Selection, Preset Channel Scan Play, Repeat Play, Shuffle Play, Error Signs, no Cd, no TAPE, TAPE play -5-
Summary of the content on the page No. 7
DETACHABLE FRONT PANEL The front panel is designed to be removable for antitheft purposes. It is recommended that you remove and carry the front panel with you when you leave your car. A carrying case is provided with the unit for this purpose. RELEASE KNOB HOW TO DETACH THE FRONT PANEL 1 Press the release knob (REL) to release the front panel. 2 Pull the entire panel to remove it from the unit. HOW TO REPLACE THE FRONT PANEL FRONT PANEL Align the right side of the panel with the stopper, and
Summary of the content on the page No. 8
GENERAL OPERATION 4 8 7 6 5 1 2 3 TURNING THE POWER ON........................................ 1 Install the front panel and press the ON/OFF button when ACC is on. TURNING THE POWER OFF ...................................... 1 Press the ON/OFF button to stop the current operation. The button dims when the power is off (ACC on). ELECTRONIC CONTROLS......................................... 2, 3 Press the SEL button to select the audio functions as shown in the table below. To adjust the vo
Summary of the content on the page No. 9
BASSXPANDER (BASX) - 1/2 .....................................4 BASSXPANDER is a dual-mode sound equalization feature. Press button to select the BASSXPANDER mode as follows; b-1 b-2 OFF BASSXPANDER offers two preset mode: b-1 enhances the low and high frequencies, while b-2 enhances the low frequencies and reduces the high frequencies. RADIO SELECTION BUTTON (BND) ...........................5 Press the BND button to switch from CD player, or tape mode to radio. Each time the button is press
Summary of the content on the page No. 10
RADIO OPERATION 2 4 1 3 SELECTING RADIO MODE ........................................ 1 Press the BND button to switch from CD player or tape mode to the radio. Each time the BND button is pressed, the selected band changes as shown below. FMI FMII AM RADIO TUNING ........................................................ 2 Automatic tuning ............ Press the FF + or - REW button for more than 0.5 second until it beeps twice if the beep tones are on. When the button is released, the sys
Summary of the content on the page No. 11
ATP (AUTO TRAVEL PRESET) OPERATION................4 The Auto Travel Preset function searches for and memorizes the 6 strongest stations in one of the two bands (FM, AM) in the order of signal strength. This feature is useful when you are driving in an unfamiliar location and want to memorize local stations without changing the standard preset stations. A total of 12 stations (6 FM and 6 AM) can be programmed. To set the stations............................... 1 Select the desired band. 2 Pr
Summary of the content on the page No. 12
TAPE OPERATION 3 5 4 2 1 9 8 7 6 LOADING AND EJECTING THE TAPE......................... 1, 2 Insert a cassette into the tape slot and the tape player will start. Press the eject button to eject a tape. CAUTION Only cassette tapes that play no longer than 90 minutes should be used. Tapes exceeding 90 minutes are thin and may easily break. SELECTING TAPE MODE .......................................... 3 Inserting a cassette into the tape slot as start the tape player. If radio, CD player is
Summary of the content on the page No. 13
LOCATING THE BEGINNING OF A PROGRAM (AMSS) ....................................................................4, 5, 6 This system is equipped with a function that allows you to skip forward or backward to locate the beginning of a particular selection on the tape. (Automatic Music Select System : AMSS) 1 Press the AMSS button . "AMSS TAPE" is displayed. 2 Press the FF + button to skip forward up to 9 selections from the current location on the tape. e.g.) With "AMSS TAPE" displayed, pres
Summary of the content on the page No. 14
CD OPERATION 2 5 4 1 3 6 7 8 LOADING AND EJECTING THE CD ............................ 1, 2 Insert a disc into the CD slot and the CD player will start playing. Press the eject button to eject a disc. CAUTION This CD player is not designed for 8 cm CDs. Please do not use an 8 cm CD nor 8 cm CD adaptor. If the unit is already loaded with a CD, please do not attempt to insert another disc, which may result in damage to both of the discs and the unit. SWITCHING TO CD MODE...................
Summary of the content on the page No. 15
SKIPPING TRACKS...................................................4, 5 Press the FF + button to skip to the beginning of the next track. Press the - REW button to skip to the beginning of the track currently playing. Press the - REW button twice to skip to the beginning of the previous track. Press and hold the FF + or - REW button for more than 0.5 seconds to search quickly (with sound) in the forward or reverse direction. When the button is released, the CD resumes normal play. SHUFFLE
Summary of the content on the page No. 16
ERROR SIGNS CD Player If a problem should occur while operating the built-in CD player, one of the following error signs may be displayed: Error Sign Cause Remedy Abnormal mechanism function. Press the eject button. Turn the power off and then on again. If it is not corrected, contact the place of purchase. The disc is inserted incorrectly. Eject the disc and insert it properly. The disc is dirty. Clean the disc. The disc is defective. Use another disc. Leave the disc player off for an hour
Summary of the content on the page No. 17
CLOCK 2 1 3 4 DISPLAY MODE CHANGE..........................................1 The display on the unit can be changed by pressing DISP button . Press the DISP button to switch between the clock and audio display. When a radio, tape and CD function is performed while the time display is selected, the audio display will appear for 5 seconds, then the display will return to the time mode. ADJUSTING THE TIME ..............................................1, 2, 3 To adjust the time, press the DISP
Summary of the content on the page No. 18
HINTS FOR PROPER AND SAFE OPERATION • Condensation Moisture can condense on the optical lens of the CD player during humid or rainy days, or after the car heater is turned on. If this occurs the disc player may not function properly. To remedy the situation, remove the disc from the unit and wait approximately one hour. This should allow the moisture to evaporate and restore normal operation. Temperature Consideration The unit may not operate correctly in extremely hot or cold temperatures.
Summary of the content on the page No. 19
TROUBLESHOOTING Sometimes a simple operational error or a mistake in the wiring can appear to be a problem with the unit. Before having the unit serviced, refer to the troubleshooting chart below. Symptom Cause Solution The compact disc does not play The volume control is turned Turn up the volume control. when inserted into the unit. down. The power connections are not Check the +12V and ground wired correctly. connections. No sound is coming out. The speaker code connection is Check the conn
Summary of the content on the page No. 20
ACCESSORIES AND HARDWARE Mounting Bracket Rear Strap Screw M5 x 14 Hex bolt M5 x 8 (Half Sleeve) x 1 (Brace) x 1 x 1 x1 Unlock Levers Screw M2 x 8 Removable Trim Ring x 2 x 1 x 1 INSTALLATION 1. BEFORE INSTALLATION When mounting the unit in a car, keep the unit as level as possible. If the unit must be mounted at an angle, due to the design of the vehicle, make sure the unit does not tilt by more
