Metra Electronics 99-7610HG user manual

Summary of the content on the page No. 1

INSTALLATION INSTRUCTIONS FOR PART 99-7610
INSTALLATION INSTRUCTIONS FOR PART 99-7610
APPLICATIONS
2007-up
Nissan Versa
2011 Nissan Juke
99-7610B
99-7610HG
KIT FEATURES
• DIN head unit provisions with pocket
• ISO DIN head unit provision with pocket
• Double DIN mount radio provision
• B = Matte Black
• HG = Gloss Black
KIT COMPONENTS
A) Radio Housing • B) ISO Brackets • C) Trim Plate • D) DDIN Trim Plate
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
• 70-7552 - 2007-up Nissan Harness

Summary of the content on the page No. 2

INSTALLATION INSTRUCTIONS FOR PART 99-7610 TABLE OF CONTENTS Dash Disassembly - Nissan Versa 2007-up..............................................................................1 - Nissan Juke 2011....................................................................................2 Kit Assembly - DIN Mount Radio Provision with Pocket .................................................. 3 - ISO Mount Radio Provision with Pocket ............................................... 4-5 - Double DIN Mount

Summary of the content on the page No. 3

99-7610 DASH DISASSEMBLY 2007-UP NISSAN VERSA 1. Unclip and remove the panel above the radio. (Figure A, B) 2. Remove (2) Phillips screws securing the radio trim panel then unclip and remove the entire panel surrounding the radio and a/c controls. (Figure C) 3. Remove (4) Phillips screws securing radio, unplug and remove radio. (Figure D) Continue to kit assembly. Figure C PRESET A-B-C CD RADIO LOAD DISP CLOCK 6CD CHANGER RPT SCRL 1 4 RDM SEEK TUNE PUSH TRACK AUDIO 2 5 AUX FF-REW PWR FILE

Summary of the content on the page No. 4

99-7610 DASH DISASSEMBLY 2011 NISSAN JUKE 1. Unclip and remove the climate control panel. (Figure A) 2. Remove (2) Phillips screws securing the radio trim panel. (Figure B) 3. Remove (4) Phillips screws securing radio, unplug and remove radio. (Figure C) Continue to kit assembly. Figure A Figure B Figure C 2

Summary of the content on the page No. 5

99-7610 DIN HEAD UNIT PROVISION Note: You will need to remove the after- Nissan Juke market radio’s trim ring if equipped. 1. Cut and remove the appropriate tabs not necessary for your application. Nissan Versa (Figure A) 2. Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure B) Nissan Juke 3. Slide the aftermarket head unit into Figure A the cage and secure. (Figure C) 4. Locate the factory wiring harness and antenna plug in the dash. Metr

Summary of the content on the page No. 6

99-7610 ISO MOUNT RADIO PROVISION Note: The following modification will need to be made to both ISO brackets when using the ISO mount radio provision. Cut or trim the area shown from the ISO bracket. (Figure A) 1. Cut and remove the appropriate tabs not necessary for your application. (Figure B) Continued on page 5. FRONT FACE- RIGHT SIDE BRACKET Figure A Nissan Juke Nissan Versa Nissan Juke Figure B 4

Summary of the content on the page No. 7

99-7610 1. Mount the ISO Brackets to the head unit with the screws supplied with the unit. (Figure C) 2. Slide the head unit into the radio opening until the side clips engage. (Figure D) 3. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 4. Attach the trim plate supplied with the kit to the front of the radio Figure C housing assembly. (Figure D) 5. Reassemble dash in reverse order of disasse

Summary of the content on the page No. 8

99-7610 DOUBLE DIN MOUNT RADIO PROVISION 1. Mount the factory brackets (removed from factory radio during disassembly) to the sides of the double DIN radio using screws supplied with the double DIN radio. (Figure A) 2. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 3. Place the DDIN trim plate on the front of the DDIN radio. (Figure B) Figure A 4. Reassemble dash in reverse order of disassemb

Summary of the content on the page No. 9

99-7610 NOTES

Summary of the content on the page No. 10

99-7610 NOTES

Summary of the content on the page No. 11

99-7610 NOTES

Summary of the content on the page No. 12

INSTALLATION INSTRUCTIONS FOR PART 99-7610 ™ METRA. THE WORLD’S BEST KITS. 1-800-221-0932 metraonline.com © COPYRIGHT 2011 METRA ELECTRONICS CORPORATION REV. 7/26/11