Summary of the content on the page No. 1
KDC-BT7043U
KDC-MP6043U
CD-RECEIVER
INSTRUCTION MANUAL
© B64-4316-00/00 (MW/M0)
Summary of the content on the page No. 2
Contents Before use 3 Audio Adjustments 18 Audio Control Basic Operation 4 Adjusting the detail of Audio Control Audio Setup Function Control 6 Speaker Setting Audio Preset Memory ⁄ • Read through this page first for the setting of each Audio Preset Recall function. Favorite Control 21 Display Settings 9 Preset Memory Text Display Selection Preset Recall Auxiliary Input Display Setting Preset Memory Delete Name Setting Music disc/Audio file Operation 10 Music Search Bluetooth Setup 23 Music Se
Summary of the content on the page No. 3
Before use • If you experience problems during installation, 2WARNING consult your Kenwood dealer. To prevent injury or fire, take the following • When you purchase optional accessories, check with precautions: your Kenwood dealer to make sure that they work • To prevent a short circuit, never put or leave any with your model and in your area. metallic objects (such as coins or metal tools) inside • The characters which can be displayed by this unit the unit. are A-Z 0-9 @ “ ‘ ` % & * + –
Summary of the content on the page No. 4
Basic Operation Release Microphone Disc slot [ ] [ ] [AUTO] [ ] [AUD] [SEARCH] [FAVORITE] [SRC] Auxiliary input USB Terminal Faceplate release: Release General functions Releases the faceplate lock so that it can be removed. Power/Source Select button: [SRC] Refer to the following diagram when reattaching the Turns on the power. faceplate. When the power is on, the source switches between Tuner (“TUNER”) , USB or iPod (“USB” or “iPod”), CD (“CD”) , Auxiliary input (“AUX”), and Standby (
Summary of the content on the page No. 5
Function Control : [SEARCH] Disc ejection: [0] Press this button for 1 second allows you to set ⁄ various functions using the [AUD] knob. Refer to • You can eject the disc for 10 minutes after switching off the (page 6). engine. Category Function of setup item USB device/iPod play: USB Terminal AUTO MEMORY Putting stations with good reception in the memory Connecting a USB device starts playback. automatically. ⁄ iPodCTRL Allows you to set up iPod Control by Hand Mode.
Summary of the content on the page No. 6
Function Control Functions in the table below can be set up by using Function Control. Category Item Setting Entry Setting overview Condition Page Memorizes 6 stations with good reception automatically. AUTO “AUTO MEMORY” 13 MEMORY When set to “ON”, allows you to operate iPod with the iPodCTRL “iPodCTRL” “ON”/ “OFF”* 11 control on the iPod. When set to “ON”, plays the intro of the music in the PLAY “FILE SCN” “ON”/ “OFF”* — folder successively. MODE* When set to “ON”, plays the music in the
Summary of the content on the page No. 7
Category Item Setting Entry Setting overview Condition Page MENU “NR LEVEL”* “–2” – “0”* Reduces the noises generated by the surrounding — * environment without changing the microphone – “+2” volume. Specify the voice output speaker. “SP SEL”* “FRONT”*/ * “F-R”/ “F-L ” Output a beep from the speaker when a call comes in. “CALL BEEP”* “ON”*/ “OFF” * Display the firmware version and update the firmware. “BT F/W UPDATE”* 25 1 sec. Setting the operation check sound (beep sound) ON/ “BEEP”*
Summary of the content on the page No. 8
Function Control Displayed item is depending on currently selected 1 Enter Function Control mode source or mode. The mark in Condition column Press the [SEARCH] button for at least 1 second. shows the condition to which the item is displayed. ”FUNCTION” is displayed. : Can be set in other than standby state. 2 Select your desired setup item : Can be set in standby state. : Can be set while Audio file source of CD/USB/iPod. Operation type Operation : Can be set while Audio file source o
Summary of the content on the page No. 9
Display Settings Information Display Text Display Selection Music title “TITLE***” Changes displayed information on each source Folder name “FLD***” following; File name “FILE***” In Tuner source Information Display Frequency “FREQUENCY” Clock “CLOCK” Auxiliary Input Display Setting Selects the display when changing to Auxiliary In CD & External disc source input source. Information Display Disc title “DISC TITLE” 1 Select Auxiliary input display setting item Track title “TRACK TITLE” during
Summary of the content on the page No. 10
Music disc/Audio file Operation Function of Audio file/ Internal CD source Function of iPod Music Search Music Search for iPod Selecting the music you want to listen to from the Search for the song (in iPod) you want to play. device or media being played now. 1 Enter Music Search mode 1 Enter Music Search mode Press the [SEARCH] button. Press the [SEARCH] button. “SEARCH” is displayed. “SEARCH” is displayed. 2 Search for music Displays the current Audio file name. Operation type Operation 2 Sea
Summary of the content on the page No. 11
Function of iPod ⁄ 1 iPod Control by Hand Mode • * Skip Search: The number of songs to be skipped is determined by the ratio of the total number of songs Allows you to operate iPod with the control on the in the list which is selected now. Set the ratio with iPod. “SKIP SRCH” in (page 6). Keep pushing [AUD] knob for 3 seconds or longer skips Enter iPod Control by Hand Mode songs at 10% irrespective of the setting. Select “iPodCTRL” . • The time of search by alphabet m
Summary of the content on the page No. 12
Music disc/Audio file Operation Function of disc changers with remote control Direct Disc Search Searchs the disc by entering the disc number. 1 Enter the disc number Press the number buttons on the remote control. 2 Search the disc Press the [FM+] or [AM–] button. Cancelling Direct Disc Search Press the [38] button. ⁄ • Direct Disc Search cannot be performed during playing of Random play or scan play. • Input “0” to select disc 10. Basic Operation of Disc Changer (Optional) Selecting CD chan
Summary of the content on the page No. 13
Tuner Operation Function of remote control Auto Memory Entry Direct Access Tuning Putting stations with good reception in the memory automatically. Entering the frequency and tuning. 1 Enter Auto Memory Entry mode 1 Enter Direct Access Tuning mode Select “AUTO MEMORY” . Press the [DIRECT] button on the remote For how to select Function Control items, refer to control. (page 6). “– – – –” is displayed. 2 Open Auto Memory Entry 2 Enter the frequency Turn the [AUD] knob to sel
Summary of the content on the page No. 14
Function of KDC-BT7043U Operation of hands-free phoning Adjusting the Voice Volume during a Call Before Use Turn the [AUD] knob. • For details on the Bluetooth cell-phone with the hands-free function, see (page 30). • You need to register your cell-phone before using Call waiting it with this unit. For more details, see (page 23). Answering Another Incoming Call with the • If you have registered two or more cell-phones, Current Call Sus
Summary of the content on the page No. 15
Making a call 5 Press the [AUD] knob. Phone number is displayed. 1 Enter dialing method mode 6 Make a call Press the [ ] button. Press the [AUD] knob for at least 1 second. 2 Select a dialing method ⁄ Press the [AUD] knob. • You need to register the preset dial number. (page 16) “NUMBER DIAL” » “PHONE BOOK1” » “PHONE BOOK2” » “OUT-CALL” » “IN-CALL” » “MISSED CALLS” Methods of operations in the above modes are described below. Calling a number in the Phone Book 3 Exit the dialing method mode 1
Summary of the content on the page No. 16
Function of KDC-BT7043U Operation of hands-free phoning Calling a number in the call log Registering to the Preset Dial Number List 1 Enter dialing method mode Press the [ ] button. 1 Enter the phone number you wish to register Enter the phone number with reference to the 2 Select the call log mode following: Press the [AUD] knob. Dial a number/ Calling a number in the call log/ Select the “OUT-CALL” (outgoing call), “IN-CALL” Calling a number in the Phone Book (incoming call), or “MISSED CA
Summary of the content on the page No. 17
Other Functions Activating Security Code Deactivating Security Code To deactivate the Security Code function. ⁄ • You can set the Security Code with a 4 digit number of your 1 Select Security Code item during Menu choice. mode (In Standby mode) • The Security Code cannot be displayed or referenced. Make Select the “SECURITY CLR” display. a note of the Security Code and treasure it up. For how to select Function Control items, refer to 1 Select Security Code item during Menu
Summary of the content on the page No. 18
Other Functions Audio Adjustments Manual Clock Adjustment Audio Control You can adjust following Audio Control items ; 1 Select Clock Adjustment item during Menu mode Adjustment Item Display Range Select the “CLOCK ADJUST” display. Rear volume “R-VOLUME” 0 — 35 For how to select Function Control items, refer to Subwoofer level “SUB-W L” –15 — +15 (page 6). Bass Boost “B.BOOST” “STEP1”/”STEP2”/“OFF” (The indicator turns on 2 Enter Clock adjustment mode according to the sett
Summary of the content on the page No. 19
Adjusting the detail of Audio Control Audio Setup You can adjust the following Basic Audio Items in You can set Sound system , such as follows; datail: Bass level, Middle level, and Treble leval. Adjustment Item Display Range Front High Pass Filter “HPF F” Through/40/60/80/100/120/ Bass level 150/180/220 Hz Adjustment Item Display Range Rear High Pass Filter “HPF R” Through/40/60/80/100/120/ Bass Center Frequency “BASS F” 40/50/60/70/80/100/ 150/180/220 Hz 120/150 Hz Low Pass Filter “LPF SW”
Summary of the content on the page No. 20
Audio Adjustments Speaker Setting 6 Exit Audio Preset mode Press the [SERACH] button twice. Fine-tuning so that the System Q value is optimal ⁄ when setting the speaker type as follows; • Register 1 pair of Audio Preset Memory. You cannot Speaker type Display register by the source. OFF “SP SEL OFF” • When you press the Reset, all the sources will be the For 5 & 4 in. speaker “SP SEL 5/4” setting value which is registered. For 6 & 6x9 in. speaker “SP SEL 6x9/6” • The following items cannot be
