Summary of the content on the page No. 18
Accessories/ Installation Procedure with the ignition, connect the ignition wire to a power Accessories source that can be turned on and off with the ignition key. • Use a commercially available conversion connector if the connector does not fit in the vehicle connector. 1 • Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. ..........1 • If the console has a lid, make
Summary of the content on the page No. 19
Connecting Wires to Terminals KDC-W5641U/W5541U/W5141U/W5041U Steering remote control (Light Blue/Yellow) REMO.CONT LR Rear/Subw Rear preout/SubW oofer proofer pr eput eout To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required. KDC-W4141/W4041 When this terminal is not in use, leave its cap on. L Rear/Subwoofer preput Rear/SubWoofer preout R FM/AM antenna input (JASO) (KDC-W5641U/W5541U/W5141U/W5041U) FM/AM antenn
Summary of the content on the page No. 20
Connecting Wires to Terminals Connector Function Guide 2WARNING Pin Numbers for Cable Colour Functions Connecting the ISO Connector ISO Connectors The pin arrangement for the ISO connectors depends on External Power the type of vehicle you drive. Make sure to make the proper Connector connections to prevent damage to the unit. A-4 Yellow Battery The default connection for the wiring harness is described in A-5 Blue/White Power Control 1 below. If the ISO connector pins are set as described i
Summary of the content on the page No. 1
CD-RECEIVER
KDC-W5641U
KDC-W5541U
KDC-W5141U
KDC-W5041U
KDC-W4141
KDC-W4041
INSTRUCTION MANUAL
© B64-3958-00/00 (EW/E2W)
Summary of the content on the page No. 2
Contents Before use 3 Appendix 15 Basic Operation 4 Accessories/ Installation Procedure 18 General functions Connecting Wires to Terminals 19 Tuner functions Disc & Audio file play functions Installation/Removing the Unit 21 General Operation 6 Troubleshooting Guide 22 Audio Control Audio Setup Specifications 24 Speaker Setting Display Switching Tuner Operation 8 PTY (Program Type) Program Type preset Changing Language for PTY Function Direct Access Tuning Music disc/Audio file Operation 9 Play
Summary of the content on the page No. 3
Before use • If you experience problems during installation, 2WARNING consult your Kenwood dealer. To prevent injury or fire, take the following • When you purchase optional accessories, check with precautions: your Kenwood dealer to make sure that they work • To prevent a short circuit, never put or leave any with your model and in your area. metallic objects (such as coins or metal tools) inside • The characters which can be displayed by this unit the unit. are A-Z 0-9 @ " ‘ ` % & * + –
Summary of the content on the page No. 4
Basic Operation Display Auxiliary input [TI] Release Release [M.JOG] Display Disc slot Disc slot Auxiliary input [ ] [ ] Control knob [SRC] [1] [2] [3] [4] [5] [6] USB Terminal Control knob USB Terminal damaged by shocks or jolts. General functions • Keep the faceplate in its faceplate case while detached. • Do not place the faceplate (and the faceplate case) in areas Power/Source select button [SRC] exposed to direct sunlight, excessive heat or humidity. Also Turns on the power. avoid place
Summary of the content on the page No. 5
: Indicates the button etc. to operate. Tuning Control knob Pause and play [38] Changes the frequency when pushing toward left or Switches between pause and play each time this right. button is pressed. ⁄ Disc ejection [0] • During reception of stereo stations the “ST” indicator is ON. ⁄ • You can eject the disc for 10 minutes after switching off the Traffi c information [TI] engine. Turns ON or OFF the Traffi c Information function. When the function is turned ON, “TI” indicator is O
Summary of the content on the page No. 6
General Operation Audio Control Audio Setup You can adjust following Audio Control items; You can set Sound system , such as follows; Adjustment Item Display Range Adjustment Item Display Range Front High Pass Filter* “HPF F” Through/80/100/120/ 150/180 Rear volume* “R-VOLUME” 0 — 35 Hz Subwoofer level “SUB-W L” –15 — +15 Rear High Pass Filter* “HPF R” Through/80/100/120/ 150/180 Bass Boost** “B.BOOST-L” “L1”/”L2”/“OFF” (The Hz indicator turns on according to Low Pass Filter “LPF SW” 60*1/80
Summary of the content on the page No. 7
Speaker Setting Display Switching Fine-tuning so that the System Q value is optimal Changes displayed information on each source when setting the speaker type as follows; following; Speaker type Display In Tuner source OFF “SP SEL OFF” Information Display For 5 & 4 in. speaker “SP SEL 5/4” Program Service name or Frequency “FREQUENCY/PS” For 6 & 6x9 in. speaker “SP SEL 6*9/6” Radio text, Program Service name or Frequency “RADIO TEXT” For the OEM speaker “SP SEL OEM” Clock “CLOCK” 1 Enter Standb
Summary of the content on the page No. 8
Tuner Operation is displayed. Select another Program Type. PTY (Program Type) 4 Exit PTY mode Selecting the Program Type below and searching Press the [38] button. for a station; No. Program Type Display 1. Speech “SPEECH” 2. Music “MUSIC” Program Type preset 3. News “NEWS” Putting the Program Type in the Preset button 4. Current Affairs “AFFAIRS” 5. Information “INFO” memory and quick recall. 6. Sport “SPORT” 7. Education “EDUCATE” Presetting the Program Type 8. Drama “DRAMA” 1 Select the Pro
Summary of the content on the page No. 9
Music disc/Audio fi le Operation Function of remote control Play Functions of Disc Changer Direct Access Tuning While a disc in the disc changer is being played, the following play functions can be used. Entering the frequency and tuning. Playing the Current Song or Disc Repeatedly. 1 Enter Direct Access Tuning mode (Repeat play) Press the [DIRECT] button on the remote Press the [4] button. control. Pressing the button repeatedly selects Track Repeat "– – – –" is displayed. play on (“TRAC REP
Summary of the content on the page No. 10
Music disc/Audio fi le Operation Function of disc changers with remote control Function of KDC-W5641U/KDC-W5541U Function of iPod Direct Disc Search iPod Select Searchs the disc by entering the disc number. Search for the song you want to listen to by 1 Enter the disc number selecting the same menu item as that of iPod. Press the number buttons on the remote 1 Enter Multi Jog Select mode control. Press the [M.JOG] button. 2 Search the disc “MULTI JOG ON” is displayed. Press the [FM] or [AM] but
Summary of the content on the page No. 11
Menu Operation Menu System Display Setting Setting overview Source 3 “RUSSIAN”* ON*/OFF Selects Russian as the display Set up the following functions; language. Display Setting Setting overview Source — “SCROLL” AUTO/ Scrolls the screen once when the “SECURITY Refer to Sets security code MANUAL* displayed text changes. SET” page 12 “AUX” OFF/ON1*/ Sets whether to display AUX “CLOCK Refer to Sets the clock. ON2 during source selection. ADJUST” page 12 “POWER OFF” --- – 20M* Turns off the power
Summary of the content on the page No. 12
Menu Operation and the input prohibition periods shown in the table Security Code below is generated. When Security Code is set, possibility of theft After the input prohibition time lapses, “CODE” is is reduced because input of Security Code is displayed, and you can reenter the code. prompted to turn on the unit once it is turned off. Number of times the Input prohibited time incorrect code was input ⁄ 1— • When you activate the Security Code function, it cannot be 2 5 minutes released. 3
Summary of the content on the page No. 13
Auxiliary Input Display Setting Selects the display below when changing to Auxiliary input source; • “AUX” • “DVD” • “PORTABLE” • “GAME” • “VIDEO” • “TV” 1 Select Auxiliary input display setting item during Menu mode Select the “NAME SET” display. For how to select menu items, refer to
