Kenwood KDC-W7037 user manual

Summary of the content on the page No. 7

General features ATT VOL Release button FNC SRC Control knob ATT indicator Function icon SRC Select mode 2: Power Press the [SRC] button. Turning ON the Power Source required Display Press the [SRC] button. Tuner "TUNER" ⁄ USB device (iPod)* "USB" ("iPod") • When the power is ON, the (page 27) is CD "Compact Disc" displayed as "CODE ON" or "CODE OFF". External disc (Optional accessory) "CD Changer" Turning OFF the Power Auxiliary input "AUX" Press the [SRC] button for at least

Summary of the content on the page No. 8

General features Volume ⁄ About System Q • You can recall the best sound setting preset for different Increasing Volume types of music. Turn the [VOL] knob clockwise. • Change each setting value with the (page 9). First, select the speaker type with the Speaker Decreasing Volume setting. Turn the [VOL] knob counterclockwise. • "USER": The ranges selected lastly for Bass level, Middle level, and Treble level are recalled automatically. 5 Exit Audio Control mode Attenuator P

Summary of the content on the page No. 9

• Dual Zone System Subwoofer Output Main source and sub source (Auxiliary input) output Turning the Subwoofer output ON or OFF. Front channel and Rear channel separately. - Set up the channel of sub source by (page 30). 2 seconds. - Select Main source by [SRC] button. Each time you push the knob, Subwoofer output - Adjust the volume of Front channel by [VOL] knob. switches ON and OFF. - Adjust the volume of Rear ch

Summary of the content on the page No. 10

General features Function Control mode Display Type Selection To set up various functions of this unit, select tree- Changing the display mode. structured function items. 1 Enter Display Type Selection mode 1 Enter Function Control mode Using the Control knob, select "DISP" > "TYPE". Press the [FNC] button. For the operation method, refer to (page 10). 2 Select your desired setup item Select a setup item using the Control knob. 2 Select the display Type Turn the Control

Summary of the content on the page No. 11

Display Type A/ Display Type B ⁄ Graphic Display Selection • To change the information by the Display Type, refer to the page on the following table for the methods to Changing the graphic Display. alternate by the Display Type. Display Type AB C D E 1 Enter Graphic Display Selection mode Graphic 1 11 11 — — — Using the Control knob, select "DISP" > Status 2 11 11 — — — "GRAPH". Text 3 — 12 ——— For the operation method, refer to (page 10). Middle 5

Summary of the content on the page No. 12

General features Text Display Selection Text Display Selection —Display Type B&E— — Display Type C&D— Selecting the text display. Changing the text display. 1 Enter Text Dispaly Selection mode 1 Enter Text Display Selection mode Using the Control knob, select "DISP" > "TEXT". Using the Control knob, select "DISP" > "TEXT". For the operation method, refer to (page 10). Control mode> (page 10). 2 Select the text 2 Select the tex

Summary of the content on the page No. 13

• In the middle text display part, the Kenwood logo is In Auxiliary input source displayed if the contents of the information cannot be Information Display Condition displayed. 34 Auxiliary input name "Source Name" • In the lower text display part, no information is displayed Clock "Clock" 34567 when display without information is selected. 34567 Date "Date" Blank "Blank" 567 The text display In Tuner source Information Display Condition 34 Program Service name (FM) "Frequency/PS" 34567 Radi

Summary of the content on the page No. 14

General features Theft Deterrent Faceplate External Display Selection The faceplate of the unit can be detached and taken Changing the display in the connected External with you, helping to deter theft. Display. Removing the Faceplate 1 Enter External display select mode Using the Control knob, select "DISP" > "DOUT". 1 Press the Release button. For the operation method, refer to (page 10). 2 Drawing the faceplate to left side pull it to "DISP

Summary of the content on the page No. 15

Tuner features AME FM AM 1 - 6 FNC SRC Control knob ST indicator Frequency display Band display Preset station number Function icon Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. Refer to (page 7). 2 Select the band Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Push the Control knob towards [4] or [¢]. ⁄

Summary of the content on the page No. 16

Tuner features Function of remote control Cancelling the Preset Memory mode Press the [FNC] button. Direct Access Tuning ⁄ Entering the frequency and tuning. • This function can be operated with [1] — [6] button. - Press the desired [1] — [6] button for at least 2 seconds. 1 Select the band Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote Auto Memory Entry control. Putting stations with good reception in the memory "– – – –" is displayed

Summary of the content on the page No. 17

RDS features TI FM AM FNC 1 - 6 SRC Control knob Program Service name Radio text Function icon Traffic Information ⁄ • Traffic information can be switched when it is on the Changing to traffic information automatically when Tuner Source. However, you cannot switch the Traffic a traffic bulletin starts even when you are not information during reception of the Traffic bulletin listening to the radio. switched from the source other than the Tuner. Press the [TI] button. Each time you press t

Summary of the content on the page No. 18

RDS features PTY (Program Type) ⁄ • Speech and Music include the Program type shown Selecting the Program Type and searching for a below. station. Music: No.12 — 17, 26 — 30 Speech: No.3 — 11, 18 — 25, 31 1 Enter PTY mode • You can put the Program Type in the [1] — [6] button Press the Control knob. memory and for quick recall. Refer to the (page 18). ⁄ • You can change the display language. Refer to

Summary of the content on the page No. 19

Changing Language for PTY Function Selecting the Program Type display language. 1 Enter PTY mode Refer to (page 18). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Turn the Control knob or push it towards up or down. Each time you push the knob, the language alternates between the languages shown in the table below. Language Display English "English" Spanish "Spanish" French "French" Dutch "Dutch" Norwegian "Norwegian" Portuguese "Portuguese"

Summary of the content on the page No. 20

M.RDM REP CD/USB device/Audio file/External disc control features FNC SCAN RDM/ Release button SRC Control knob S.MODE A.RDM IN indicator Folder number File number Play time Function icon Playing CD & Audio file When a disc is inserted Press the [SRC] button. When there is no disc inserted Select the "Compact Disc" display. Refer to (page 7). 1 Drop open the faceplate Press the Release button. Pause and play Press the Control knob. 2 Insert a disc. Each time you press t