Summary of the content on the page No. 1
CASSETTE RECEIVER
RECEPTOR-REPRODUCTOR DE CASSETTE
RADIOCASSETTE
KS-FX220
S.BASS
SEL
DISP
7 89 10 11 12
MO/RND SCM
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
INSTRUCTIONS
reference.
MANUAL DE
Summary of the content on the page No. 2
How to reset your unit Press and hold both the SEL (Select) and (Standby/On/Attenuator) buttons at the same time for several seconds. This will reset the built-in microcomputer. (Standby/On/Attenuator) SEL (Select) Note: • Your preset adjustments — such as preset channels or sound adjustments — will also be erased. 2 ENCOVER-19-KS-FX220[J]-F 4 6/11/02, 9*25 ENGLISH
Summary of the content on the page No. 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit .............................. 2 OTHER MAIN FUNCTIONS ............... 12 Setting the clock ....................................... 12 LOCATION OF THE BUTTONS ........... 4 Detaching the control panel ..................... 13 Control panel....................................
Summary of the content on the page No. 4
LOCATION OF THE BUTTONS Control panel u i o ; a s d Display window 1234 5 6 7 89pq S.BASS SEL DISP 7 89 10 11 12 MO/RND SCM w e r t y 1 (Standby/On/Attenuator) button Display window 2 S.BASS (Super Bass) button u Band indicators 3 SEL (Select) button FM1, FM2, FM3, 4 DISP (Display) button AM 5 0 (Eject) button i CD-CH (CD Changer) indicator 6 Cassette compartment o Sound mode indicators 71 / ¡ (PROG : program) buttons BEAT, SOFT, POP 8 CD-CH button ; MO (Monaural) indicator 9 AM button ST (Stere
Summary of the content on the page No. 5
BASIC OPERATIONS S.BASS SEL DISP 89 7 10 11 12 MO/RND SCM 1 3 2 Turning on the power 4 Adjust the sound as you want (see pages 10 – 11). 1 Turn on the power. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and Note on One-Touch Operation: the volume level will drop in a moment. • When you select a source in step 2 below, the To resume the previous volume level, press the power automatically comes on. You do not button briefly aga
Summary of the content on the page No. 6
RADIO OPERATIONS S.BASS SEL DISP 7 89 10 11 12 MO/RND SCM To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune in to a particular station. Searching a station manually: Note: When a cassette is in the cassette compartment, you Manual search cannot select the tuner. Be sure to eject the cassette from the cassette compartment to listen to the radio. 1 Select th
Summary of the content on the page No. 7
3 Tune in to a station you want while Storing stations in memory “M” is flashing. You can use one of the following two methods to To tune in to stations store broadcasting stations in memory. of higher frequencies • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations To tune in to stations of lower frequencies FM station automatic preset: SSM You can preset 6 local FM stations in each FM band • If you release your finger from the bu
Summary of the content on the page No. 8
4 Repeat the above procedure to store Manual preset other stations into other preset You can preset up to 6 stations in each band (FM1, numbers. FM2, FM3 and AM) manually. Ex.: Storing an FM station of 88.3 MHz into the Notes: • A previously preset station is erased when a new station preset number 1 of the FM1 band is stored in the same preset number. • Preset stations are erased when the power supply to 1 Select the band (FM1 – 3, AM) you the memory circuit is interrupted (for example, during
Summary of the content on the page No. 9
TAPE OPERATIONS S.BASS SEL DISP 7 89 10 11 12 MO/RND SCM To stop play and eject the cassette. Listening to a cassette Press 0. You can playback type I (normal) tapes. Tape play stops and the cassette automatically ejects from the cassette compartment. The source changes to the previously selected one. 1 Turn on the power. • You cannot change the source if the cassette is still in the cassette compartment. To change source, you must eject the cassette first. • You can also eject the cassette by p
Summary of the content on the page No. 10
SOUND ADJUSTMENTS Turning on/off the super bass Adjusting the sound function You can adjust the sound characteristics to your preference. The super bass function allows you to maintain the richness and fullness of the bass sound regardless of how low you set the volume. 1 Select the item you want to adjust. Each time you press S.BASS, the function turns on and off alternately. Each time you press the button, SEL the adjustable items change as S.BASS follows: (Bass) (Treble) (Fader) (Balance) (Vo
Summary of the content on the page No. 11
4 To turn on or off the Super Bass. Storing your own sound Each time you press S.BASS, the super bass function turns on and off alternately. See page adjustments 10 for details. You can adjust the sound modes (BEAT, SOFT, S.BASS POP) to your preference and store your own adjustments in memory. • There is a time limit in doing the following procedure. If the setting is canceled before you 5 Repeat steps 2 and 3 to adjust the finish, start from step 1 again. other items. 1 Call up the sound mode y
Summary of the content on the page No. 12
OTHER MAIN FUNCTIONS To check the current clock time or change Setting the clock the display mode. 1 Press and hold SEL (Select) for more Press DISP (display) repeatedly. DISP than 2 seconds. Each time you press the button, “CLOCK H” or “CLOCK M” the display mode changes as SEL appears on the display. follows: • During tuner operation: 2 Set the hour. Frequency Clock 1 Select “CLOCK H” if not shown on the display. 2 Adjust the hour. • During tape operation: 12 Play mode (tape direction) Clock
Summary of the content on the page No. 13
Attaching the control panel Detaching the control panel 1 Insert the left side of the control You can detach the control panel when leaving panel into the groove on the the car. panel holder. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. 1 Unlock the control panel. 2 Press the right side of the control pa
Summary of the content on the page No. 14
CD CHANGER OPERATIONS S.BASS SEL DISP 7 89 10 11 12 MO/RND SCM We recommend that you use one of the CH-X To check the elapsed playing time. series with your unit (except for JVC MP3- compatible CD changer). Press DISP (display) If you have another CD changer, consult repeatedly. DISP your JVC car audio dealer for connections. Each time you press the • For example, if your CD changer is one of the KD- button, the display mode MK series, you need a cord (KS-U15K) for connecting changes as follows.
Summary of the content on the page No. 15
To go to a particular disc directly Selecting CD playback modes 7 89 10 11 12 To playback tracks at random (Random Play) Each time you press MO/RND (Mono/Random) while playing a CD, CD random play mode changes as follows: Press the number button corresponding to the MO/RND disc number to start its playback. • To select a disc number from 1 – 6: RND1 RND2 Canceled Press 1 (7) – 6 (12) briefly. • To select a disc number from 7 – 12: Press and hold 1 (7) – 6 (12) for more than 1 second. Mode RND Pl
Summary of the content on the page No. 16
MAINTENANCE This unit requires very little attention, but you will CAUTIONS: be able to extend the life of the unit if you follow • Do not play the tapes with peeling labels; the instructions below. otherwise, they can damage the unit. • Tighten tapes to remove slack since loose tape To clean the heads may become entangled with the mechanism. • Do not leave a cassette in the cassette compartment after use, as the tape may become slack. • Clean the heads after every 10 hours of use using a wet-ty
Summary of the content on the page No. 17
TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • A cassette tape cannot be You have tried to insert a Insert the cassette with the inserted. cassette in the wrong way. exposed tape facing right. • Cassette tapes become hot. This is not a malfunction. • Tape sound is at very low The tape head is dirty. Clean it with a head cleaning level and sound quality is tape. degraded. • Sound is sometimes
Summary of the content on the page No. 18
SPECIFICATIONS AUDIO AMPLIFIER SECTION CASSETTE DECK SECTION Maximum Power Output: Wow & Flutter : 0.15% (WRMS) Front : 45 W per channel Fast-Wind Time : 190 sec. (C-60) Rear : 45 W per channel Frequency Response : 50 to 14 000 Hz Continuous Power Output (RMS): (normal tape) Front : 17 W per channel into 4 Ω , 40 Hz Signal-to-Noise Ratio : 52 dB to 20 000 Hz at no more than Stereo Separation : 40 dB 0.8% total harmonic distortion. Rear : 17 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more
Summary of the content on the page No. 19
ENCOVER-19-KS-FX220[J]-F 4 6/11/02, 9*25
Summary of the content on the page No. 20
Cómo reposicionar su unidad Pulse y mantenga pulsado los botones SEL (Selección) y (En espera/Encendido/ Atenuador) al mismo tiempo durante varios segundos. Esto hará que se reposicione el microcomputador incorporado. (En espera/Encendido/Atenuador) SEL (Selección) NOTA: • También se borrarán los ajustes preestablecidos por usted — como por ejemplo los canales preajustados o los ajustes de sonido. 2 SP02-18-KS-FX220[J]-F 4 6/11/02, 9*28 ESPAÑOL
