JVC KDX40 user manual

Summary of the content on the page No. 1

ENGLISH
ESPAÑOL
FRANÇAIS
KD-X40
DIGITAL MEDIA RECEIVER / RECEPTOR DE MEDIOS
DIGITALES / RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE
For canceling the display demonstration, see page 4. /
Para cancelar la demostración en pantalla, consulte la página 4. /
Pour annuler la démonstration des affichages, référez-vous à la page 4.
For installation and connections, refer to the separate manual. For Customer Use:
Para la instalación y las conexiones, refiérase al manual separado. Enter below the
Model No. and Serial

Summary of the content on the page No. 2

Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. For U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can r

Summary of the content on the page No. 3

Warning: Contents Stop the car before operating the unit. Preparation ............................................................ 4 Caution: Canceling the display demonstration Adjust the volume so that you can hear sounds Setting the clock outside the car. Driving with the volume too high may cause an accident. Basic operations ................................................... 4 Avoid using the USB device or iPod/iPhone if it Radio ...........................................................

Summary of the content on the page No. 4

Preparation Preparation Canceling the display Setting the clock demonstration 1 (Hold) The display demonstration is always turned on unless you cancel it. 2 Select . 1 (Hold) 2 3 Select . (Initial setting) 3 Select . 4 Adjust the hour. 4 Press MENU to exit. 5 Adjust the minute. 6 Press MENU to exit. Basic operations Display information Changes the display information. (Press) Scrolls the current display information. (Hold) Source Display Radio Frequency Clock USB Alb

Summary of the content on the page No. 5

Basic operations Control panel Remote controller Display window Control dial Front AUX input jack Remote sensor USB input terminal Aim the remote controller directly at the sensor. DO NOT expose to bright sunlight. When you press or hold the following button(s)... Remote Control panel General function controller Turns on. Turns off. (Hold) — /SOURCE Press the /SOURCE button on the control panel and turn the control dial within 2 seconds to select the source. SOURCE Press repeatedly to sele

Summary of the content on the page No. 6

Radio Radio Searching for a station A B Select or . Auto search. (Press) Manual search. (Hold) “M” flashes, then press the button repeatedly. “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength. Storing stations in memory Setting the Radio Timer You can tune in to a preset station at a specific Manual presetting time regardless of the current source. You can preset up to 18 stations for FM and 6 stations for AM. 1 (Hold) While listening to a station...

Summary of the content on the page No. 7

USB USB Playing a USB device USB input terminal USB 2.0 cable (not supplied) The source changes to “USB” and playback starts. This unit can play MP3/WMA files stored in USB mass storage device (such as a USB memory and Digital Audio Player). Make sure all important data has been backed up. We shall bear no responsibility for any loss of data in USB mass storage class device while using this system. Selecting a folder/track Selecting the playback modes You can select one of the following playba

Summary of the content on the page No. 8

iPod/iPhone Playing an iPod/iPhone USB input terminal USB 2.0 cable (accessory of the iPod/iPhone) The source changes to “USB” “USB-IPOD” and playback starts. 3 Select the desired track. Selecting the control mode // Repeat this step until the desired track is selected. HEAD Controls iPod playback through this If the selected menu contains many tracks, you can fast search for the desired track by turning MODE unit. the control dial quickly. IPOD Controls iPod

Summary of the content on the page No. 9

iPod/iPhone Searching the registered station Pandora internet radio from the list Preparation 1 1 Search for “Pandora” in the Apple iTunes App Store to find and install the most current version of the Pandora 2 Select the station list display mode. application onto your device. 2 In the application on your device, log in and create an account with Pandora. If you are not a registered user, an account BY DATE According to the registration date can also be created at www.pandora.com. A - Z Alph

Summary of the content on the page No. 10

External components External components For details, refer also to the instructions supplied with the external components. Playing an external component from Front/Rear AUX 1 Connect to F-AUX on the control panel and/or R-AUX on the rear panel. 3.5 mm (1/8") stereo mini plug (not supplied) 2 Set the source as necessary. (Hold) Portable audio / player, etc. or Press MENU to exit. 3 Select or . 3.5 mm (1/8") stereo mini plug

Summary of the content on the page No. 11

Illumination color adjustments All zone All zone: Includes both Button zone and Display zone. Button zone Display zone Selecting the preset color Storing your own adjustments You can select a preset color for , , and and separately. separately. 1 (Hold) 1 (Hold) 2 Select . 2 Select . 3 3 Select a primary BUTTON color

Summary of the content on the page No. 12

Brightness adjustments Brightness adjustments You can select your preferred brightness for

, separately. 1 3 (Hold) 2 BUTTON ZONE BUTTON 00 to 31 DISP ZONE DISP 00 to 31 / 4 Press MENU to exit. Sound adjustments This unit memorizes sound settings adjusted for each individual source. Pro Equalizer Selecting the preset sound 1 You can select a preset sound mode, for each (Hold) individual source, suitable for the music genre. 2

Summary of the content on the page No. 13

Remote controller Remote controller Warning: Preparing Do not install any battery other than CR2025 or When you use the remote controller for the first its equivalent. time, pull out the insulation sheet. Do not leave the remote controller in places (such as dashboards) exposed to direct sunlight for a long time. Store the battery in places out of reach of Insulation sheet children. For USA-California Only: Do not recharge, short, disassemble, heat the This product contains a CR Coin Cell Li

Summary of the content on the page No. 14

Menu operations Menu operations 1 3 Repeat step 2 if necessary. (Hold) To return to the previous menu, press . To exit from the menu, press DISP or MENU. If no operation is done for about 60 seconds, the operation will be canceled. 2 Menu item Selectable setting (Initial: [XX]) DEMO For settings, page 4. CLOCK COLOR For settings, page 11. COLOR SETUP DIMMER SET Selects the display and button illumination adjusted in the / setting. [AUTO]: Changes between the Day an

Summary of the content on the page No. 15

Menu operations Menu item Selectable setting (Initial: [XX]) SUB. W *5 OFF: Cancels. (Subwoofer) [ON]: Turns on the subwoofer output. SUB.W LPF *6 LOW 55Hz/MID 85Hz/[HIGH 120Hz]: Audio signals with frequencies (Subwoofer low- lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer. pass filter) SUB.W LEVEL *6 00 — 08 [08]: Adjusts the subwoofer output level. (Subwoofer level) HPF *6 ON: Activates the High Pass Filter. Low frequency signals are cut off from (High-pass filter) the front/rear speak

Summary of the content on the page No. 16

Additional information Additional information About audio files About USB device When connecting a USB cable, use the USB 2.0 Playable files cable. File extensions: MP3(.mp3), WMA(.wma) You cannot connect a computer or portable Bit rate: HDD to the USB input terminal of the unit. MP3: 8 kbps - 320 kbps Connect only one USB device to the unit at a WMA: 32 kbps - 192 kbps time. Do not use a USB hub. Sampling frequency: USB devices equipped with special functions MP3: 48 kHz, 44.1 kHz, 32 kH

Summary of the content on the page No. 17

Additional information About iPod/iPhone Trademark and license notice iPod/iPhone that can be connected to this unit: Microsoft and Windows Media are either - iPod touch (4th generation) registered trademarks or trademarks of - iPod touch (3rd generation) Microsoft Corporation in the United States - iPod touch (2nd generation) and/or other countries. - iPod touch (1st generation) “Made for iPod” and “Made for iPhone” mean - iPod classic that an electronic accessory has been designed - iPod wi

Summary of the content on the page No. 18

Troubleshooting Troubleshooting Symptom Remedy/Cause General No sound, sound interrupted or Check the cords, antenna and cable connections. static noise. Check the condition of the connected device and recorded tracks. “MISWIRING CHK WIRING THEN Ensure the terminals of the speaker leads are properly insulated RESET UNIT”/“WARNING CHK with tape before resetting the unit. ( page 3) WIRING THEN RESET UNIT” If the message does not disappear, consult your JVC car audio appears on the display and n

Summary of the content on the page No. 19

Specifications Specifications AUDIO AMPLIFIER SECTION Power Output 20 W RMS x 4 Channels at 4Ω and ≤ 1% THD+N Load Impedance 4Ω (4Ω to 8Ω allowance) Frequency Response 40 Hz to 20 000 Hz Signal-to-Noise Ratio 80 dBA (reference: 1 W into 4Ω) Line-Out, Subwoofer-Out Level/Impedance 2.5 V/20 kΩ load (full scale) Output Impedance ≤ 600Ω TUNER SECTION FM Frequency Range 200 kHz step: 87.9 MHz to 107.9 MHz 50 kHz step: 87.5 MHz to 108.0 MHz Usable Sensitivity 9.3 dBf (0.8 μV/75Ω) 50 dB Quieting Sensit

Summary of the content on the page No. 20

Muchas gracias por la compra de un producto JVC. Como primer paso, por favor lea detenidamente este manual para comprender a fondo todas las instrucciones y obtener un máximo disfrute de esta unidad. Para EE.UU. Este equipo se ha sometido a todo tipo de pruebas y cumple con las normas establecidas para dispositivos de Clase B, de conformidad con la Parte 15 de las reglas de la FCC (Comisión Federal de Comunicaciones). Estas reglas están diseñadas para asegurar una protección razonable contra est