Summary of the content on the page No. 1
KD-SX850
KD-SX750
CD RECEIVER KD-SX850/SX750
RECEPTOR CON CD KD-SX850/SX750
RECEPTEUR CD KD-SX850/SX750
KD-SX850
45Wx4 CD CHANGER CONTROL
MO
SCM RND
SSM
DISP
RPT
COMPACT
VCR
DIGITAL AUDIO
SCAN
71 8 90 11 12 EXT
BBE FM/AM C D
KD-SX750
45Wx4 CD CHANGER CONTROL
MO
SCM RND
SSM
DISP
RPT
COMPACT
DIGITAL AUDIO
SCAN
718901112
BBE FM/AM C D
COMPACT
DIGITAL AUDIO
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’ins
Summary of the content on the page No. 2
INFORMATION (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarante
Summary of the content on the page No. 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS BASIC OPERATIONS.................................................... 4 RADIO OPERATIONS................................................... 5 Listening to the radio ..................................................................... 5 Storing stations in memory ..................................
Summary of the content on the page No. 4
BASIC OPERATIONS 1 3 Note: When you use this unit for the 2 first time, set the built-in clock correctly, see page 19. 1 Turn on the power. "HELLO" appears on the display. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. FM/AM To operate the tuner, see pages 5 – 9. To operate the CD player, see pages 10 – 12. To operate the CD changer, see pages 27 – 29. To oper
Summary of the content on the page No. 5
RADIO OPERATIONS Listening to the radio 2 1 1 FM/AM Select the band (FM1, FM2, FM3 or AM). You can select any one of FM1, FM2, and FM3 to listen to an FM station. FM1 FM2 FM3 AM Audio level indicator selected band appears To search 2 stations of higher Start searching a station. frequencies. When a station is received, searching stops. SSM To search stations of lower frequencies. To stop searching before a station is received, press the same button you have pressed for searching. To tune in a pa
Summary of the content on the page No. 6
Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong-station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3). 2 1 1 FM1 FM2 FM3 AM FM/AM Select the FM band number (FM1, FM2 or FM3) you want to store FM stations into. 2 Press and hold the both buttons for more than 2 seconds
Summary of the content on the page No. 7
Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 2 1 3 1 FM/AM Select the FM1 band. 2 Tune into a station of 88.3 MHz. See page 5 to tune into a station. SSM 3 Press and hold the button for more than 2 seconds. “P1” flashes for a few seconds. 4 Repeat the above procedure to store other stations into other preset numbers. Notes: • A previously preset station is erased wh
Summary of the content on the page No. 8
Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 6 and 7. 2 1 1 FM/AM Select the band (FM1, FM2, FM3 or AM) you want. FM1 FM2 FM3 AM 2 Select the number (1 – 6) for the preset station you want. 8 EN 05-09.KD-SX850[J] 8 00.1.19, 9:16 AM ENGLISH
Summary of the content on the page No. 9
Other convenient tuner functions MO/RND ¢ Control dial 4 SEL SCAN Scanning broadcast stations When you press SCAN while listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes on the display), and you can check what program is now being broadcasted. If you want to listen to that program, press the same button again to stop scanning. Selecting FM reception sound When an FM stereo broadcast is hard to re
Summary of the content on the page No. 10
CD OPERATIONS Playing a CD 1 0 1 Insert a disc into the loading slot. The unit turns on, draws a CD and starts playback automatically. • When a CD is inserted upside down, "NO DISC" appears on the display and the CD automatically ejects. Total playing time of Total track number Elapsed playing Current track the inserted disc of the inserted disc time Note on One-Touch Operation: When a CD is already in the loading slot, pressing CD turns on the unit and starts playback automatically. CAUTION on
Summary of the content on the page No. 11
Locating a track or a particular portion on a CD ¢ 4 Number buttons To fast forward or reverse the track Press and hold ¢, while playing a CD, to fast forward the track. SSM Press and hold 4, while playing a CD, to reverse the track. To go to the next track or the previous track Press ¢ briefly, while playing a CD, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning of the next tracks is located and played back. SSM Press 4 briefly,
Summary of the content on the page No. 12
Selecting CD playback modes MO/RND RPT To play back tracks at random (Random Play) You can play back all tracks on the CD at random. MO Each time you press MO/RND (Mono/Random) while playing a CD, CD RND random play mode turns on and off alternatively. When the random mode is turned on, the RND indicator lights up on the display and a track randomly selected starts playing. To play back tracks repeatedly (Repeat Play) You can play back the current track repeatedly. RPT Each time you press RPT (R
Summary of the content on the page No. 13
SOUND ADJUSTMENTS Adjusting the sound You can adjust the sound characteristics to your preference. 2 Equalization pattern indicator 1 Select the item you want to adjust. Indication To do: Range BAS Adjust the bass –06 (min.) — +06 (max.) (Bass) TRE Adjust the treble –06 (min.) — +06 (max.) (Treble) FAD Adjust the front and rear speaker R06 (rear only) — F06 (front only) (Fader)* balance BAL Adjust the left and right speaker L06 (left only) — R06 (right only) (Balance) balance VOL Adjust the vol
Summary of the content on the page No. 14
II Turning on/off the BBE function II The BBE * function restores the brilliance and clarity of the original live sound in recording, broadcasts, etc. When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing II high-frequency sounds to take longer to reach the ear than low frequency sounds. The BBE function adjusts the phase relationship between the low, mid and high frequencies by adding a progressively longer delay time to the low and mid frequencies, so that
Summary of the content on the page No. 15
Using the Sound Control Memory You can select and store a preset sound adjustment suitable to each playback source. (Advanced SCM) Selecting and storing the sound modes Once you select a sound mode, it is stored in memory, and will be recalled every time you select the same source. A sound mode can be stored each of the following sources — FM1, FM2, FM3, AM, CD, CD changer and external components. • If you do not want to store the sound mode separately for each playback source, but want to use t
Summary of the content on the page No. 16
Recalling the sound modes 1 1 Select the source while the “Link” indicator is lit on the display. The “Link” indicator starts flashing, and the sound mode FM/AM stored in memory for the selected source is recalled. Equalization pattern of the Sound mode selected sound mode appears indicator BBE Notes: • You can adjust each sound mode to your preference, and store it in memory. If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” on page 18. II • To
Summary of the content on the page No. 17
Canceling Advanced SCM You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes and the playback sources. When shipped from the factory, a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources. LINK ON: Advanced SCM (different SCMs for different sources) LINK OFF: Conventional SCM (one SCM for all sources) 2 3 1 Press and hold SEL for more than 2 seconds. “CLOCK H”, “CLOCK M”, “SCM LINK”, “LEVE
Summary of the content on the page No. 18
Storing your own sound adjustments You can adjust the sound modes (BEAT, SOFT, POP: see page 15) to your preference and store your own adjustments in memory. 3 22 1 SCM Call up the sound mode you want to adjust. See page 15 for details. Within 5 seconds 2 To adjust the bass or treble sound level Select “BAS” or “TRE.” II To turn on or off the BBE function BBE See page 14 Within 5 seconds 3 Adjust the bass or treble level. See page 13 for details. Within 5 seconds 4 Press and hold SCM until the s
Summary of the content on the page No. 19
OTHER MAIN FUNCTIONS Setting the clock 2,3 2,3 1 Press and hold SEL for more than 2 seconds. “CLOCK H”, “CLOCK M”, “SCM LINK”, “LEVEL”, “BEEP**”, “AREA” or “LINE IN*” appears on the display. * Displayed only when one of the following sources is selected — FM, AM and CD. (ONLY FOR KD-SX750) ** (ONLY FOR KD-SX850) 1. 2 Set the hour. SSM 1. Select “CLOCK H” if not shown on the 2. display. 2. Adjust the hour. * (ONLY FOR KD-SX750) ** (ONLY FOR KD-SX850) 1. 3 Set the minute. SSM 1. Select “CLOCK
Summary of the content on the page No. 20
To check the current clock time (changing the display mode) Press DISP repeatedly. Each time you press the button, the display mode changes as follows. During tuner operation: During CD operation: Elapsed Clock Frequency Clock playing time During external component operation: During CD changer operation: Elapsed Disc Clock playing time number LINE IN Clock • If the unit is not in use when you press DISP, the power turns on, the clock time is shown for 5 seconds, then the power turns off. 20 EN
