Summary of the content on the page No. 1
CD RECEIVER KD-SH99
RECEPTOR CON CD KD-SH99
RECEPTEUR CD KD-SH99
ATT
ANGLE
EQ
CD
DAB
DISC
FM
PRESET PRESET
AM R D
CH
DISC
AUX SEL
VOLUME
RM-RK100
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
INSTRUCTIONS
Retain this information
Summary of the content on the page No. 2
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Summary of the content on the page No. 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 SOUND ADJUSTMENTS .................. 21 Adjusting the sound ................................. 21 LOCATION OF THE BUTTONS ............ 4 Reinforcing the bass sound ...................... 21 Control panel .....................................
Summary of the content on the page No. 4
LOCATION OF THE BUTTONS Control panel 1 2 3 4 5 6 7 8 9 p q y t r e w 10 (eject) button q MP3 INPUT jack 2 Control dial w (control panel release) button 3 SEL (select) button e Remote sensor 4 EQ (equalization) button r Number buttons 5 S.BASS (S) (super bass) button • MO (monaural) button 6 DISP (D) (display) button • LO (local) button 7 BAND (B) button • INT (intro scan) button 8 MODE (M) button • RPT (repeat) button • RND (random) button 9 4/¢ buttons • Also function as SSM buttons when pres
Summary of the content on the page No. 5
4 Selects the sound modes. Remote controller Each time you press the button, sound modes change. 5 • Searches for stations while listening to the radio. ATT 1 3 • Fast-forwards or reverses the track/file if ANGLE pressed and held while listening to any disc. EQ 4 • Skips to the beginning of the next track/file or goes back to the beginning of the current (or CD 5 previous) track/file if pressed briefly while DAB listening to any disc. (See pages 12 and 17.) DISC 6 FM 6 • Changes the preset chann
Summary of the content on the page No. 6
2. Place the battery. Preparing the remote controller Slide the battery into the holder with the + side facing upwards so that the battery is fixed in Before using the remote controller: the holder. • Aim the remote controller directly at the remote Lithium coin battery sensor on the main unit. Make sure there is no (product number: obstacle in between. CR2025) 3. Return the battery holder. Insert again the battery holder pushing it until you hear a clicking sound. Remote sensor (back side) • Do
Summary of the content on the page No. 7
BASIC OPERATIONS Note: When you use this unit for the first time, set the built-in clock correctly, see page 24. 2 1 1 Turn on the power and select the 2 Adjust the volume. source. To increase the volume. When you press the button for the first time, the power comes on. Then each time To decrease the volume. you press the button, the source changes as follows: * ** FM TUNER CD PLAY CD CHANGER Volume level appears. or AM TUNER AUX INPUT LINE INPUT Volume level indicator * If a disc is not in the
Summary of the content on the page No. 8
RADIO BASIC OPERATIONS To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune into a particular station. To tune into FM stations only with strong signals 1 Press MODE (M) to enter the functions mode Searching a station automatically: while listening to an FM broadcast. Auto search 2 Press LO (local) while still in the functions mode, so that the LOCAL indicato
Summary of the content on the page No. 9
2 Press and hold ¢ or 4 until Storing stations in memory “M” (manual) starts flashing on the display. You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3). 3 Tune into a station you want while “M” is flashing. 1 Select the FM band (FM1 – 3) y
Summary of the content on the page No. 10
Manual preset Tuning into a preset station You can preset up to 6 stations in each band You can easily tune into a preset station. (FM1, FM2, FM3 and AM) manually. Remember that you must store stations first. If Ex.: Storing an FM station of 88.3 MHz into the you have not stored them yet, see “Storing preset number 1 of the FM1 band stations in memory” on page 9. 1 Select the band (FM1 – 3, AM) you 1 Select the band (FM1 – 3, AM). want to store stations into (in this 1 Press SOURCE example, FM1
Summary of the content on the page No. 11
CD OPERATIONS When playing an MP3 disc, refer also to Notes: “MP3 OPERATIONS” on pages 16 to 20. • When a disc is in the loading slot, selecting “CD” as the source by pressing SOURCE starts CD play. Playing a CD • When a disc is inserted upside down, the disc automatically ejects. 1 Open the loading slot. • When you play a CD Text, the disc title and The control panel moves down, performer appear on the display. Then the current and the loading slot appears. track title appears on the display, f
Summary of the content on the page No. 12
Selecting CD playback modes Locating a track or particular portion on a CD To play back tracks at random (Random Play) 1 Press MODE (M) while To fast-forward or reverse the track playing a disc. The unit enters the functions mode. Press and hold ¢ 2 Press RND (random) while still while playing a disc, to in the functions mode, so that fast-forward the track. the RND indicator lights up on Press and hold 4 the display. while playing a disc, to Then, each time you press reverse the track. RND, t
Summary of the content on the page No. 13
To play back only intros (Intro scan) Prohibiting disc ejection You can play back the first 15 seconds of each track sequentially. You can prohibit disc ejection and can lock a disc in the loading slot. 1 Press MODE (M) while playing a disc. The unit enters While pressing SEL (select), the functions mode. press and hold 0 for more than 2 2 Press INT (intro scan) while still seconds. in the functions mode, so that “NO EJECT” flashes on the the “INT” appears on the display. display for about 5 sec
Summary of the content on the page No. 14
MP3 INTRODUCTION What is MP3? How are MP3 files recorded and played back? MP3 is an abbreviation of Motion Picture Experts Group (or MPEG) Audio Layer 3. MP3 is simply a MP3 “files (tracks)” can be recorded in file format with a data compression ratio of 1:10 “directories (folders)”—in PC terminology. (128 Kbps*). That means, by using MP3 format, During recording, the files and directories can be one CD-R or CD-RW can contain 10 times as arranged in a way similar to arranging files and much data
Summary of the content on the page No. 15
MP3 directory/file configuration ROOT 1 2 4 8 1 2 3 4 3 5 9 10 11 20 21 5 6 6 7 12 13 22 23 24 7 8 9 14 15 16 17 18 19 Notes: • In compliance with ISO 9660, the maximum number of hierarchy ROOT : Root levels is eight, including the root directory. • When a multi-session disc is loaded, you can only play back the : Directories 1 contents of the last session. : MP3 files MP3 playback/search order (page 17) • The numbers in circles next to the MP3 files ( ) indicate the playback order and search or
Summary of the content on the page No. 16
MP3 OPERATIONS Refer also to “CD OPERATIONS” on pages 11 to Playback starts automatically from the first file 13. of the first directory once file check is completed. Then, the display changes to show the Playing an MP3 disc following: • When “TAG ON” is selected (initial 1 Open the loading slot. setting: see page 27) The control panel moves down, and the loading slot appears. Album name/performer name (directory name)* = Track title (file name)* = Elapsed playing time 2 Insert an MP3 disc into
Summary of the content on the page No. 17
To change the display information Locating a file or particular While playing back an MP3 file, you portion on an MP3 disc can change the file information shown on the display. To fast-forward or reverse the file Each time you press DISP (D), the display changes to show the Press and hold ¢ following: while playing an MP3 disc, to fast-forward the file. • When “TAG ON” is selected (initial Press and hold 4 setting: see page 27) while playing an MP3 disc, Album name/ to reverse the file. Perfor
Summary of the content on the page No. 18
To skip to the next directory—either on To go to a particular directory directly the same hierarchy level or on a different IMPORTANT: hierarchy level To directly select the directories using the On the control panel: number button(s), it is required that directories 1 Press MODE (M) while are assigned 2 digit numbers at the beginning of playing an MP3 disc. The unit their directory names. (This can only be done enters the functions mode. during the recording of CD-Rs or CD-RWs.) 2 Press ¢ brie
Summary of the content on the page No. 19
To skip to the next directory on the same To skip to the directories on the lower hierarchy level hierarchy levels On the remote controller: On the remote controller: PRESET Each time you press the button Each time you press the button consecutively, the next directory consecutively, a directory on the DISC on the same hierarchy level is lower hierarchy level is located located (and the first file in the (and the first file in the directory directory starts playing, if starts playing, if recorde
Summary of the content on the page No. 20
To play back only intros (Intro scan) Selecting MP3 playback modes You can play back the first 15 seconds of each file sequentially. To play back files at random (Random Play) 1 Press MODE (M) while 1 Press MODE (M) while playing an MP3 disc. The unit playing an MP3 disc. The unit enters the functions mode. enters the functions mode. 2 Press INT (intro scan) while still 2 Press RND (random) while in the functions mode, so that still in the functions mode, so “INT” appears on the display. that th
