Summary of the content on the page No. 1
KD-SH707
CD RECEIVER KD-SH909/KD-SH707
RECEPTOR CON CD KD-SH909/KD-SH707
RECEPTEUR CD KD-SH909/KD-SH707
KD-SH909
ATT
EB D B M
ANGLE
KD-SH909
MOSFET 200W E-BASS DISP BAND MODE ATT
EQ
MP3
CD INPUT
DAB
DISC
FM
PRESET PRESET
AM R D
CH
KD-SH707
DISC
AUX SEL
EB D B M
VOLUME
MOSFET 200W E-BASS DISP BAND MODE ATT
MP3
INPUT
RM-RK100
• This unit is equipped with the display demonstration. To cancel it, see page 9.
• Esta unidad está equipada con demostración en la pantalla. Para cancelarla, consulte la
Summary of the content on the page No. 2
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Summary of the content on the page No. 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 MP3 OPERATIONS ........................ 20 How to use the MODE (M) button ............ 4 Playing an MP3 disc ................................. 20 How to change the display patterns ......... 4 Locating a file or particular portion on an MP3
Summary of the content on the page No. 4
How to use the MODE (M) button: If you press MODE (M), the unit goes into functions mode and the number, 4/¢ and DISP (D) work as different function buttons. During functions mode: MODE Time countdown indicator lights up To use these buttons for their original function (ex. as the number buttons) again after pressing MODE (M), wait for 5 seconds without pressing any of these buttons until the functions mode is cleared. • Pressing MODE (M) again also clears the functions mode. How to change th
Summary of the content on the page No. 5
LOCATION OF THE BUTTONS Control panel Display window o u i ; a sdf RPT DIRECTORY ST FILE DISC RND STATION MO TRACK LOCAL g hj kl / 1 2 3 4 5 6 7 8 9 p q EB D B M BAND MODE MOSFET 200W E-BASS DISP ATT MP3 INPUT w e t y KD-SH909 KD-SH707 r 10 (eject) button t Remote sensor 2 Control dial y (control panel release) button 3 SEL (select) button 4 EQ (equalization) button 5 E-BASS (EB) (Extended Bass) button Display window 6 DISP (D) (Display) button u MP3 indicators 7 BAND (B) button DIRECTORY, FI
Summary of the content on the page No. 6
5 • Searches for stations while listening to the Remote controller radio. • Fast-forwards or reverses the track/file if pressed and held while listening to any disc. (See pages 15 and 22.) ATT 1 3 • Skips to the beginning of the next track/file or ANGLE goes back to the beginning of the current EQ 4 (or previous) track/file if pressed briefly while listening to any disc. (See pages 15 and 22.) CD 5 DAB DISC 6 6 • Changes the preset channel number while FM listening to the radio. PRESET PRESET 2
Summary of the content on the page No. 7
2. Place the battery. Preparing the remote controller Slide the battery into the holder with the + side facing upwards so that the battery is fixed in Before using the remote controller: the holder. • Aim the remote controller directly at the remote Lithium coin battery sensor on the main unit. Make sure there is no (product number: obstacle in between. CR2025) 3. Return the battery holder. Insert again the battery holder pushing it until you hear a clicking sound. Remote sensor (back side) • Do
Summary of the content on the page No. 8
BASIC OPERATIONS Note: EB E-BASS DISP BAND MODE When you use this unit for the first time, set the built-in MP3 clock correctly, see page 9. INPUT The control panel illustrations in this manual is of KD-SH909. 2 Adjust the volume. Turning on the power To increase the volume. 1 Turn on the power and select the source. To decrease the volume. When you press the button for the first time, the power comes on. Then each time Volume level appears. you press the button, the source changes as follows: F
Summary of the content on the page No. 9
Setting the clock Canceling the display demonstration 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM When shipped from the factory, display items appears on the display. demonstration has been activated, and starts (See page 31.) automatically when no operations are done and no sound comes in for about 3 minutes. To cancel the display demonstration, follow the procedure below. 2 Set the hour. 1 Select “CLOCK H (hour)” if not shown on 1 Press and hold SEL (select) fo
Summary of the content on the page No. 10
RADIO BASIC OPERATIONS EB E-BASS DISP BAND MODE MP3 INPUT Listening to the radio 2 Start searching a station. Press ¢ to search You can use either automatic searching or manual stations of higher searching to tune in to a particular station. frequencies. Press 4 to search Searching a station automatically: stations of lower Auto search frequencies. 1 Select FM or AM. When a station is received, searching stops. 1 Press SOURCE repeatedly to select To stop searching before a station is received
Summary of the content on the page No. 11
• If you release your finger from the button, Searching a station manually: the manual mode will automatically turn off Manual search after 5 seconds. • If you hold down the button, the frequency 1 Select FM or AM. keeps changing until you release the 1 Press SOURCE button. repeatedly to select FM or AM as the source. When an FM stereo broadcast is hard to receive: 2 If necessary, press BAND (B) repeatedly 1 Press MODE (M) to enter the to select the FM band BAND functions mode while listening
Summary of the content on the page No. 12
Local FM stations with the strongest signals are Storing stations in memory searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). You can use one of the following two methods to These stations are preset in the number buttons store broadcasting stations in memory. — No.1 (lowest frequency) to No.6 (highest • Automatic preset of FM stations: SSM (Strong- frequency). station Sequential Memory) When automatic preset is over, the station stored • Manual preset of
Summary of the content on the page No. 13
2 Tune in to a station (in this example, Tuning in to a preset station of 88.3 MHz). You can easily tune in to a preset station. Press ¢ to tune Remember that you must store stations first. If in to stations of higher you have not stored them yet, see “Storing frequencies. stations in memory” on page 12. Press 4 to tune in to stations of lower 1 Select the band (FM1 – 3, AM). frequencies. 1 Press SOURCE repeatedly to select FM or AM as the source. 2 If necessary, press 3 Press and hold the nu
Summary of the content on the page No. 14
CD OPERATIONS EB E-BASS DISP BAND MODE MP3 INPUT Total track number of the inserted disc When playing an MP3 disc, refer also to “MP3 OPERATIONS” on pages 20 to 26. Playing a CD Total playing time of the inserted disc 1 Open the control panel. Current track The control panel moves down, and the loading slot appears. Note: Elapsed playing time When an external component is connected to the MP3 INPUT jack, be careful of handling a disc. Notes: • When a disc is in the loading slot, selecting “CD” a
Summary of the content on the page No. 15
To return the control panel to its previous To go to the next or previous tracks position, press 0 again. Press ¢ briefly while • If you keep the loading slot open for one playing a disc, to go ahead minute (or 30 seconds when you have ejected to the beginning of the next a disc with the ignition key turned to “OFF”), a track. Each time you press beep sounds and the control panel returns to the button consecutively, the its previous position. beginning of the next tracks Be careful not to get t
Summary of the content on the page No. 16
Selecting CD playback modes Playing a CD Text To play back tracks at random (Random Play) In a CD Text, some information about the disc (its disc title, performer and track title) is recorded. You can play back all tracks on the disc at You can show these disc information on the random. display. 1 Press MODE (M) while playing a disc. This unit MODE Select text display mode while playing a enters the functions mode. CD Text. Each time you press the button, D 2 Press RND (random) while DISP the
Summary of the content on the page No. 17
To play back the current track repeatedly Prohibiting disc ejection (One Track Repeat Play) You can play back the current track repeatedly. You can prohibit disc ejection and can lock a disc in the loading slot. 1 Press MODE (M) while playing a disc. The unit MODE While pressing SEL (select), enters the functions mode. press and hold 0 for more than 2 seconds. 2 Press RPT (repeat) while still “NO EJECT” flashes on the in the functions mode, so display for about 5 seconds, and that the “REPEAT”
Summary of the content on the page No. 18
MP3 INTRODUCTION Precautions when recording MP3 files What is MP3? on a CD-R or CD-RW MP3 is an abbreviation of Motion Picture Experts This unit can only read MP3 files that are recorded Group (or MPEG) Audio Layer 3*. MP3 is simply a in the format that is compliant with ISO 9660 Level 1, file format with a data compression ratio of 1:10 Level 2 or Joliet. (128 Kbps**). That means, by using MP3 format, one CD-R or CD-RW can contain 10 times as How are MP3 files recorded much data volume as a reg
Summary of the content on the page No. 19
MP3 directory/file configuration ROOT 01 02 04 08 1 2 3 4 03 05 09 10 11 20 21 5 6 06 07 12 13 22 23 24 7 8 9 14 15 16 17 18 19 Note: There is no limit to the number of hierarchy levels (nested ROOT : Root directories). However, up to 8 hierarchy levels is recommended for stable operations. : Directories 01 : MP3 files MP3 playback/search order (page 22) • The numbers in circles below the MP3 files ( ) indicate the playback order and search order of the MP3 files. Normally this unit plays back M
Summary of the content on the page No. 20
MP3 OPERATIONS EB E-BASS DISP BAND MODE MP3 INPUT Refer also to “CD OPERATIONS” on pages 14 to Playback starts automatically from the first file 17. of the first directory once file check is completed. Then, the display changes to show the Playing an MP3 disc following: • When “TAG DISP” is set to “ON” (initial 1 Open the control panel. setting: see page 34) The control panel moves down, and the loading slot appears. Directory name & File name 2 Insert an MP3 disc into the loading slot. The unit
