Summary of the content on the page No. 1
KD-S6350
KD-S590
CD RECEIVER
RECEPTOR CON CD
RECEPTEUR CD
KD-S6350/KD-S590
KD-S6350
FM
DIRECT TRACK ACCESS
CD
SSM
S
AM
MO RPT RND
MODE SCM
KD-S590
DIRECT TRACK ACCESS
78 9 10 11 12
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Re
Summary of the content on the page No. 2
INFORMATION (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarante
Summary of the content on the page No. 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit .................................. 2 Selecting CD playback modes ................... 12 How to use the MODE button ...................... 3 Prohibiting CD ejection .............................. 13 LOCATION OF THE BUTTONS ...............4 SOUND ADJUSTMENTS .................
Summary of the content on the page No. 4
LOCATION OF THE BUTTONS Control panel ; a s dfg h j k l Display window 5 12 34 6789 FM DIRECT TRACK ACCESS CD SSM AM MO RPT RND MODE SCM q w r t y p e u io 1 (Standby/On/Attenuator) button Display window 2 +/– button ; SCM (Sound Control Memory) indicator 3 LOUD (Loudness) button a CD indicator 4 SEL (Select) button s Band indicators 5 Loading slot FM1, FM2, FM3 6 AM button AM 70 (Eject) button d Tuner reception indicators 8 CD button MO (Monaural), ST (Stereo) 9 FM button f RND (Random) indicat
Summary of the content on the page No. 5
4 Selects the sound mode. Remote controller Each time you press the button, the mode changes. (only for KD-S6350) 5 Selects the source. Each time you press the button, the source This section is only for KD-S6350. changes. 6 • Searches stations while listening to the radio. • Fast -forwards or reverses the track if pressed and held while listening to a CD. • Skips to the beginning of the next tracks or goes back to the beginning of the current (or previous tracks) if pressed briefly while listen
Summary of the content on the page No. 6
2 Place the battery. Preparing the remote controller Slide the battery into the holder with the + This section is ONLY FOR KD-S6350. side facing upwards so that the battery is fixed in the holder. Before using the remote controller: Lithium coin battery • Aim the remote controller directly at the remote (product number: sensor on the main unit. Make sure there is no CR2025) obstacle in between. Remote sensor 3 Return the battery holder. Insert again the battery holder pushing it until you hear a
Summary of the content on the page No. 7
BASIC OPERATIONS 1 FM CD SSM 2 AM MO RPT RND MODE SCM 3 Turning on the power 4 Adjust the sound as you want (see pages 14 – 16). 1 Turn on the power. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and Note on One-Touch Operation: the volume level will drop in a moment. When you select a source in step 2 below, the To resume the previous volume level, press the power automatically comes on. You do not have button briefly again. t
Summary of the content on the page No. 8
RADIO OPERATIONS FM CD SSM AM MO RPT RND MODE SCM To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune in to a particular station. Searching a station manually: Manual search Searching a station automatically: Auto search 1 Select the band (FM 1 – 3, AM). 1 Select the band (FM 1 – 3, AM). FM FM1 FM2 FM FM1 FM2 FM3 FM3 AM AM AM AM Lights up when receiving an N
Summary of the content on the page No. 9
Storing stations in memory 3 Tune in to a station you want while “M” is flashing. You can use one of the following two methods to store broadcasting stations in memory. Press ¢ to search • Automatic preset of FM stations: SSM (Strong- stations of higher station Sequential Memory) frequencies. • Manual preset of both FM and AM stations Press 4 to search FM station automatic preset: SSM stations of lower frequencies. You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3). • If
Summary of the content on the page No. 10
Notes: Manual preset • A previously preset station is erased when a new station You can preset up to 6 stations in each band (FM1, is stored in the same preset number. FM2, FM3 and AM) manually. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example, Ex: Storing an FM station of 88.3 MHz into the during battery replacement). If this occurs, preset the preset number 1 of the FM1 band. stations again. 1 Select the band (FM1 – 3, AM) you want to store F
Summary of the content on the page No. 11
CD OPERATIONS FM CD SSM AM MO RPT RND MODE SCM All tracks will be played repeatedly until you stop Playing a CD playback. 1 Insert a disc into the loading slot. To stop play and eject the CD The unit turns on, draws a CD and starts Press 0. playback automatically. CD play stops and the CD automatically ejects from the loading slot. Note: If you change the source, the CD play also stops When a CD is inserted (without ejecting the CD this time). upside down, the CD automatically ejects. Notes: • I
Summary of the content on the page No. 12
Locating a track or a particular Selecting CD playback modes portion on a CD To play back tracks at random (Random Play) 1 Press MODE to enter the functions mode To fast-forward or reverse the track while playing a CD. This unit enters the Press and hold ¢, functions mode. while playing a CD, to fast 2 Press RND (Random), while still in the functions forward the track. mode, so that the RND indicator lights up on the display. Press and hold 4 , Then, each time you press the button, CD while p
Summary of the content on the page No. 13
Prohibiting CD ejection You can prohibit the CD ejection and can lock a CD in the loading slot. Press and hold CD and 0 for more than 2 seconds. CD “EJECT” flashes on the display for about 5 seconds, and the CD is locked and cannot be ejected. To cancel the prohibition and “unlock” the CD, press and hold CD and 0 again for more than 2 seconds. “EJECT” appears on the display, and the CD ejects from the loading slot. 13 EN11-13-KD-S6350/S590[J]f 13 10/9/02, 3:28 PM ENGLISH
Summary of the content on the page No. 14
SOUND ADJUSTMENTS Adjusting the sound 2 Adjust the level You can adjust the sound characteristics to your To increase the level. preference. 1 Select the item you want to adjust. To decrease the level. Each time you press the button, the adjustable items change as follows: Bass level indicator Treble level indicator Indication To do: Range BAS Adjust the bass. –06 (min.) Note: (Bass) | Normally the + and – buttons work as the volume +06 (max.) control. So you do not have to select “VOL” to adj
Summary of the content on the page No. 15
Recalling the sound modes Using the Sound Control When “SCM LINK” is set to “LINK ON,” Memory (SCM) select the source. You can select and store a preset sound adjustment FM suitable to each playback source. (Advanced SCM) CD Selecting and storing the sound modes Once you select a sound mode, it is stored in AM memory. It will be recalled every time you select the same source and will be shown on the display. A sound mode can be stored for each of the Each time you change the playback source, the
Summary of the content on the page No. 16
Storing your own sound 5 To turn on/off the loudness function. See page 14 for details. adjustment You can adjust the sound modes (BEAT, SOFT, POP: see page 15) to your preference and store your own adjustments in memory. • There is a time limit in doing the following procedure. If the setting is cancelled before you 6 Press and hold SCM until the sound finish, start from step 1 again. mode you have selected in step 1 flashes on the display. 1 Call up the sound mode you want Your adjustment made
Summary of the content on the page No. 17
OTHER MAIN FUNCTIONS To Cancel Advanced SCM Setting the clock You can cancel the Advanced SCM (Sound Control 1 Press and hold SEL (Select) for more Memory), and unlink the sound modes and the than 2 seconds. playback sources. “CLOCK H”, “CLOCK M”, “SCM LINK” or When shipped from the factory, a different sound “LEVEL” appears on the display. mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources. LINK ON: Advanced SCM (different SCM for
Summary of the content on the page No. 18
Selecting the level display 3 Select the desired mode — “VOL 1”, “VOL 2” or “OFF”. You can select the level display according to your preference. When shipped from the factory, “VOL 2” is selected. VOL 1 : Shows the volume level indicator. VOL 2 : Alternates “VOL 1” setting and illumination display. OFF : Erase the volume level indicator. 4 Press SEL (select) to finish the setting. 1 Press and hold SEL for more than 2 seconds. “CLOCK H”, “CLOCK M”, “SCM LINK” or “LEVEL” appears on the display. 2
Summary of the content on the page No. 19
How to attach the control panel Detaching the control panel You can detach the control panel when leaving the car. 1 Insert the left side of the control panel When detaching or attaching the control panel, be into the groove on the panel holder. careful not to damage the connectors on the back of the control panel and on the panel holder. How to detach the control panel Before detaching the control panel, be sure to turn off the power. 1 Unlock the control panel. 2 Press the right side of the co
Summary of the content on the page No. 20
MAINTENANCE Moisture condensation Handling CDs Moisture may condense on the lens inside the CD player in the following cases: This unit has been designed to reproduce CDs • After starting the heater in the car. and CD-Rs. • If it becomes very humid inside the car. Should this occur, the CD player may • Other discs cannot be played back. malfunction. In this case, eject the CD and leave the unit turned on for a few hours until the This unit is not compatible with MP3. moisture evaporates. How to
