Summary of the content on the page No. 1
CD/SD RECEIVER
ПРИЕМНИК С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ И SD-КАРТ
KD-LHX557
В соответствии с Законом Российской Федерации “О защите прав
потре бителей” срок службы (годности) данного товара “по истечении
которого он может представлять опасность для жизни, здоровья
потребителя, причинять вред его имуществу или окружающей среде”
составляет семь (7) лет со дня производства. Этот срок является
временем, в течение которого потребитель данного товара может
безопасно им пользоваться при условии
Summary of the content on the page No. 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direc
Summary of the content on the page No. 3
Contents How to reset your unit ........................... 2 Sound adjustments ................ 24 How to forcibly eject a disc ................... 2 Setting the basic sound selection How to read this manual ........................ 4 menu—SEL ..................................... 24 How to change the display pattern Selecting preset sound modes during playback .................................. 4 (i-EQ: intelligent equalizer) ............... 25 Storing your own sound modes ............. 25
Summary of the content on the page No. 4
How to read this manual How to change the display pattern during playback The following methods are used to made the explanations simple and easy-to-understand: Some related tips and notes are explained in “More about this receiver” (see pages 46 – 49). Button and touch panel operations are mainly explained with the illustrations as follows: Source operation screen Press briefly. RDS Radiotext (RT) or DLS screen is shown when the source is “TUNER” or “DAB” (see pages 15 and 44)*. Pr
Summary of the content on the page No. 5
Control panel — KD-LHX557 Parts identification 1 (standby/on attenuator) button 5 0 (eject) button 2 Remote sensor 6 T/P (traffic programme/programme type) DO NOT expose the remote sensor to button strong light (direct sunlight or artificial 7 MENU button lighting). 8 Reset button 3 VOLUME + / – button 9 (control panel release) button 4 Touch panel p DISP (display) button Main touch panels Make sure to touch the area inside the key icon boundary when operating the touch panel. Source Sel
Summary of the content on the page No. 6
Remote controller — RM-RK300 Installing the lithium coin battery Main elements and features (CR2025) When operating, aim the remote controller directly at the remote sensor on the 1 (standby/on/attenuator) button receiver. Make sure there is no obstacle in Turns on and off the power and also between. attenuates the sound. 2 SOURCE button Warning: Selects the source. Store the battery in a place where children 3 5 (up) / ∞ (down) buttons cannot reach to avoid risk of accident.
Summary of the content on the page No. 7
Getting started Basic operations To drop the volume in a moment (ATT) ~ To restore the sound, press it again. Ÿ Select the source. To turn off the power Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. You can also select the source by.... Voice support system (VSS) You can select either “Beep” or “Voice” for the VSS. ! If “Voice” is se
Summary of the content on the page No. 8
3 Adjust the hour. Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: Interval]—see page 30. 4 Select “Clock Min” (minute), then 1 adjust the minute. 2 Select “Off.” 3 Exit from the setting. 5 Select “24H/12H,” then select “24Hours” or “12Hours.” To activate the display demonstration In step 2 above, select “All Time” or “Interval.” 6 Exit from the setting. For more details, see page 30. Setting the clock 1 To chec
Summary of the content on the page No. 9
Radio operations Listening to the radio To tune in to a station manually ~ Select “TUNER.” In step ! on the left... 1 2 Select the desired station frequencies. Ÿ Select the band (FM/AM). When an FM stereo broadcast is hard to receive 1 ! Start searching for a station. 2 Select “MONO On.” Reception improves, but stereo effect will When a station is received, searching be lost. stops. To stop searching, press the same icon 3 Exit from the setting. again. To restore the stereo effect, repeat th
Summary of the content on the page No. 10
Manual presetting Storing stations in memory Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. You can preset six stations for each band. 1 FM station automatic presetting — SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 – FM3) 2 you want to store into. 2 Holding or can display the Preset Station List (see step 5 below). 3 3 4 Appears only for FM. 5 Local FM stations with the strongest signals are searched and stored automatically in th
Summary of the content on the page No. 11
Preset Station List Listening to a preset station The lists show either the station frequency or PS name (the first 8 characters). 1 Appears only for FM. 2 Select a preset station (1 – 6) you want. Holding or can display the Preset Station List (see below). To select a preset station using the Preset Station List 1 2 3 Appears only for FM. 4 Select a preset number. 11 EN08-15_LHX557[EE]f.indd 11 EN08-15_LHX557[EE]f.indd 11 1 12/29/04 9:55:31 AM 2/29/04 9:55:31 AM ENGLISH
Summary of the content on the page No. 12
FM RDS operations Searching for your favorite FM RDS programme You can tune in to a station broadcasting your What you can do with RDS favorite programme by searching for a PTY code. RDS (Radio Data System) allows FM To store your favorite programme, see page stations to send an additional signal along 13. with their regular programme signals. By receiving the RDS data, this receiver can do the following: ~ Programme Type (PTY) Search (see the left column) Temporarily switches to
Summary of the content on the page No. 13
6 Repeat steps 3 to 5 to store other Storing your favorite programmes PTY codes into other preset numbers. You can store six favorite programme types. 7 Exit from the setting. Preset programme types: 1 Using the standby receptions 2 TA Standby Reception TA Standby Reception allows the receiver to switch temporarily to Traffic Announcement (TA) from any source other than AM. If a station starts broadcasting a traffic announcement, “Traffic News” appears on the 3 Select a PTY code. dis
Summary of the content on the page No. 14
If the PTY indicator lights up, PTY To deactivate the TA Standby Reception Standby Reception is activated. The TP indicator goes off. If the PTY indicator flashes, PTY Standby Reception is not yet activated. To activate PTY Standby Reception, tune in to another station (or service) providing these signals. The PTY indicator will stop PTY Standby Reception flashing and remain lit. PTY Standby Reception allows the receiver To deactivate the PTY Standby Reception to switch temporarily
Summary of the content on the page No. 15
To show the RDS Radiotext (RT) Using the message service— information RDS Radiotext (RT) While listening to a station that supports RT.... What is RDS Radiotext RDS Radiotext is part of the RDS data signal to transmit various text information (e.g. programme information, phone numbers, e-mail and web addresses, artist/title information and news headlines). The text service is part of the RDS broadcast. One message may contain up to 64 characters. The message service is an optional servi
Summary of the content on the page No. 16
Disc/SD card operations Playing a disc in the receiver All tracks will be played repeatedly until you change the source or eject the disc. When inserting an audio CD or a CD Text About MP3 and WMA tracks disc: ® Total playing time MP3 and WMA (Windows Media Audio) “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” When an MP3 or a WMA folder includes an image file edited by Image Converter (Wide Ver 1.2)—supplied in the CD-ROM, you can show
Summary of the content on the page No. 17
Playing discs in the CD changer When the current disc is an MP3 disc: About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your receiver. You can also connect other CH-X series CD changers (except CH-X99 and CH-X100). However, they are not 1 Current folder* compatible with MP3 discs, so you cannot play back MP3 discs. You cannot use the KD-MK series CD changers with this receiver. Disc text information recorded in the CD Text can be displayed when a
Summary of the content on the page No. 18
Playing an SD card To eject the SD card, press the SD card About the SD card again. You can play back MP3/WMA tracks recorded on the SD card and show the stored image on the display during playback— ! Attach the control panel. ImageLink. (See pages 16, 30, and 48 for details.) The required SD recording format is FAT 12/16 and the recommended storage type is 8 MB to 512 MB. You cannot use MMC or mini SD with this receiver. Before detaching the control panel, turn off the power. ⁄ The
Summary of the content on the page No. 19
If an SD card has been loaded.... Operation screens used for the following operations is of MP3 playback in the receiver. To fast-forward or reverse the track To go to the next or previous tracks To go to the next or previous folders (only for MP3 and WMA tracks) For MP3 tracks: For WMA tracks: * The album name/performer with indicator and the track title with indicator will appear if “Tag” is set to “On” (see page 32). If you hold the icon, the Folder List will appear on the dis
Summary of the content on the page No. 20
To select a disc during playback Other main functions Selecting a disc/folder/track on the list 1 If you hold the icon, the Disc List will 2 Select a disc (only for the CD appear on the display (see the right column). changer). Prohibiting disc ejection You can lock a disc in the loading slot. 1 * 1 2 * 2 If the selected disc is an MP3/WMA disc, its Folder List appears. “No Eject” flashes, and the disc cannot be ejected. Select a folder (only for MP3/WMA disc or SD card). To
