Summary of the content on the page No. 1
CD RECEIVER KD-SX870/KD-SX770
RECEPTOR CON CD KD-SX870/KD-SX770
RECEPTEUR CD KD-SX870/KD-SX770
KD-SX870
SCM
DISP
4V OUT
INT
7 8 9 10 11 12 SCAN MO
KD-SX770
SCM
DISP
INT
7 8 9 10 11 12 SCAN MO
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the
Summary of the content on the page No. 2
INFORMATION (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarante
Summary of the content on the page No. 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit .................................................................... 2 BASIC OPERATIONS ....................................................5 RADIO OPERATIONS ...................................................6 Listening to the radio .......................................
Summary of the content on the page No. 4
CD CHANGER OPERATIONS ......................................29 Playing CDs ................................................................................... 29 Selecting CD playback modes...................................................... 31 EXTERNAL COMPONENT OPERATIONS ..................... 32 Playing an external component ................................................... 32 MAINTENANCE.........................................................33 Handling CDs .............................
Summary of the content on the page No. 5
BASIC OPERATIONS 1 Note: When you use this unit for the first time, set the built-in clock correctly, see page 20. 32 1 Turn on the power. “HELLO” appears on the display. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. To operate the tuner, see pages 6 – 10. To operate the CD player, see pages 11 – 14. To operate the CD changer, see pages 29 – 31. To operate th
Summary of the content on the page No. 6
RADIO OPERATIONS Listening to the radio 12 1 Select the band (FM1, FM2, FM3 or AM). You can select any one of FM1, FM2, and FM3 to listen to an FM station. FM1 FM2 FM3 AM Audio (see page 23) or Selected band appears. volume level indicator. 2 To search stations Start searching a station. of higher frequencies. While searching stations, “SEEK” appears on the display. When a station is received, searching stops. To search stations of lower frequencies. To stop searching before a station is receive
Summary of the content on the page No. 7
Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong-station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3). 12 1 Select the FM band number (FM1, FM2 or FM3) you want to store FM stations into. FM1 FM2 FM3 AM 2 Press and hold both buttons for more than 2 seconds. “SSM” appe
Summary of the content on the page No. 8
Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 32 1 1 Select the FM1 band. 2 Tune into a station of 88.3 MHz. See page 6 to tune into a station. 3 Press and hold the number button (in this example, 1) for more than 2 seconds. Selected band and “MEMO” flash alternately for a while. 4 Repeat the above procedure to store other stations into other preset numbers. Notes: •
Summary of the content on the page No. 9
Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 7 and 8. 2 1 1 Select the band (FM1, FM2, FM3 or AM) you want. FM1 FM2 FM3 AM 2 Select the number (1 – 6) for the preset station you want. 9 EN06-10.KD-SX870.S770[J]5 9 15/12/2000, 03:41 PM ENGLISH
Summary of the content on the page No. 10
Other convenient tuner functions SCAN/RPT MO/RND Scanning broadcast stations When you press SCAN/RPT (Scan/Repeat) while listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds (“SCAN” flashes on the display), and you can check what program is now being broadcast. If you want to listen to that program, press the same button again to stop scanning. Selecting FM reception sound When an FM stereo broadcast is hard to receive: Press MO/R
Summary of the content on the page No. 11
CD OPERATIONS Playing a CD 1 1 Open the control panel. 2 1. Insert a disc into the loading slot. The unit turns on, draws a CD and starts playback automatically. 2. Close the control panel by hand. Total playing time of Total track number Elapsed the inserted disc of the inserted disc playing time Current track Notes: • When a CD is inserted up side down, “PLEASE” and “EJECT” appear on the display alternately. When you open the control panel by pressing 0, the CD automatically ejects. Note on On
Summary of the content on the page No. 12
Locating a track or a particular portion on a CD ¢ Number buttons 4 To fast-forward or reverse the track Press and hold ¢ , while playing a CD, to fast-forward the track. Press and hold 4 , while playing a CD, to reverse the track. To go to the next tracks or the previous tracks Press ¢ briefly, while playing a CD, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning of the next tracks is located and played back. Press4 briefly, whil
Summary of the content on the page No. 13
Selecting CD playback modes SCAN/RPT MO/RND To play back tracks at random (Random Play) You can play back all tracks on the CD at random. MO Each time you press MO/RND (Mono/Random) while playing a CD, CD random play mode turns on and off alternately. When the random mode is turned on, the RND indicator lights up on the display and a track randomly selected starts playing. To play back tracks repeatedly (Repeat Play) You can play back the current track repeatedly. SCAN Each time you press SCAN/R
Summary of the content on the page No. 14
INT To play back only intros (Intro Scan) Each time you press INT (Intro) briefly while playing a CD, CD intro scan mode turns on and off alternately. INT When the intro scan mode is turned on, “INT” appears on the display for 5 seconds and the track number flashes. The first 15 seconds of each track are played sequentially. Track number of the currently playing track Prohibiting CD ejection You can prohibit CD ejection and can lock a CD in the loading slot. While pressing CD, press and hold for
Summary of the content on the page No. 15
SOUND ADJUSTMENTS Adjusting the sound You can adjust the sound characteristics to your preference. 2 1 Equalization pattern indicator 1 Select the item you want to adjust. Indication To do: Range BAS Adjust the bass –06 (min.) — +06 (max.) (Bass) TRE Adjust the treble –06 (min.) — +06 (max.) (Treble) FAD Adjust the front and rear speaker R06 (rear only) — F06 (front only) (Fader)* balance BAL Adjust the left and right speaker L06 (left only) — R06 (right only) (Balance) balance VOL Adjust the
Summary of the content on the page No. 16
II Turning on/off the BBE function II The BBE * function restores the brilliance and clarity of the original live sound in recording, broadcasts, etc. When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing II high-frequency sounds to take longer to reach the ear than low frequency sounds. The BBE function adjusts the phase relationship between the low, mid and high frequencies by adding a progressively longer delay time to the low and mid frequencies, so that
Summary of the content on the page No. 17
Using the Sound Control Memory (SCM) You can select and store a preset sound adjustment suitable to each playback source. (Advanced SCM) Selecting and storing the sound modes Once you select a sound mode, it is stored in memory, and will be recalled every time you select the same source. A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM, CD and external components. • If you do not want to store the sound mode separately for each playback source, but want to use the
Summary of the content on the page No. 18
Recalling the sound modes 1 1 Select the source while the “SCM” indicator is lit on the display. The “SCM” indicator starts flashing, and the sound mode stored in memory for the selected source is recalled. Sound mode indicator Notes: • You can adjust each sound mode to your preference, and store it in memory. If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” on page 19. II • To adjust the bass and treble reinforcement levels or to turn on/off the
Summary of the content on the page No. 19
Storing your own sound adjustments You can adjust the sound modes (BEAT, SOFT, POP: see page 17) to your preference and store your own adjustments in memory. 2 2 1,3 2 1 SCM Call up the sound mode you want to adjust. See page 18 for details. Within 5 seconds 2 2 To adjust the bass or treble level 1 1 Select “BAS” or “TRE.” Within 5 seconds 2 Adjust the bass or treble level. II To turn on or off the BBE function See page 16. Within 5 seconds 3 Press and hold SCM (Sound Control Memory) SCM until t
Summary of the content on the page No. 20
OTHER MAIN FUNCTIONS Setting the clock 2,3 1,4 DISP 2,3 1 Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears on the display. 2 1 2 Set the hour. 1 Select “CLOCK H (Hour)” if not shown on the display. 2 Adjust the hour. 3 1 2 Set the minute. 1 Select “CLOCK M (Minute).” 2 Adjust the minute. 4 Finish the setting. To check the current clock time while the unit is turned off, press DISP. The power turns on, the clock time is shown for 5 seconds, then the power t
