Summary of the content on the page No. 1
CD RECEIVER
РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ
ПРИЙМАЧ З ПРОГРАВАЧЕМ КОМПАКТ-ДИСКІВ
KW-XG707
В соответствии с Законом Российской Федерации “О защите прав потре бителей” срок службы (годности) данного
товара “по истечении которого он может представлять опасность для жизни, здоровья потребителя, причинять вред
его имуществу или окружающей среде” составляет семь (7) лет со дня производства. Этот срок является временем,
в течение которого потребитель данного товара может безопасно им поль
Summary of the content on the page No. 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical
Summary of the content on the page No. 3
How to use the MODE button CONTENTS If you press MODE, the unit goes into functions mode, then the number buttons and 5/∞ buttons INTRODUCTIONS work as different function buttons. Preparation ...................................... 4 OPERATIONS Basic operations ................................ 5 [Within 5 seconds...] • Using the control panel ................ 5 • Using the remote controller (RM-RK50) ................................... 6 Listening to the radio ......................... 8
Summary of the content on the page No. 4
Preparation Cancel the display demonstration and set the clock • See also pages 27 and 28. When the power is turned off: Check the current clock time When the power is turned on: Change the display information ~ Turn on the power. Ÿ Enter the PSM settings. ! ] ⁄ Cancel the display demonstrations Select “DEMO,” then “DEMO OFF.” Set the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the minute. Select “24H/12H,” then “24H” (hour) or “12H” (hour). @
Summary of the content on the page No. 5
Basic operations Using the control panel 1 • DAB: Select DAB service. 8 Select the bands. • CD/USB/CD-CH: Select folder. 9 Reset button • IPOD/D.PLAYER: Enter the main menu/Pause or p • FM/AM/DAB: Select preset station/DAB service. stop playback/Confirm selection. • CD/USB/CD-CH: Select folder/track/disc (for CD • BT-PHONE/BT-AUDIO: Enter setting menu/ changer). Confirm selection. • BT-PHONE: Select preset phone number. 2 • Turn on the power. q Enter functions mode. • Turn off the power [H
Summary of the content on the page No. 6
Display window 1 Playback source indicators q Clock indicator 2 Track information indicators w Analyzer indicator 3 RDS indicators e Bluetooth indicator 4 Main display (Menu, playback information) r Track indicator 5 Tuner reception indicators t Source display/Preset No./Track No./Folder No./ 6 Playback mode/item indicators Disc No. (Random/Repeat) y Status of Bluetooth device 7 • Spectrum analyzer meter (Device number, [1 – 5]; signal strength, [0 – 3]*; • Volume level indicator battery remin
Summary of the content on the page No. 7
Installing the lithium coin battery (CR2025) 1 • Turns the power on if pressed briefly or attenuates the sound when the power is on. • Turns the power off if pressed and held. 2 • Changes the FM/AM/DAB bands with 5 U. • Changes the preset stations (or DAB services) with D ∞. • Changes the folder of the MP3/WMA/AAC/WAV. • While playing an MP3 disc on an MP3-compatible CD changer: – Changes the disc if pressed briefly. Warning: – Changes the folder if pressed and held. To prevent acciden
Summary of the content on the page No. 8
Listening to the radio Select preset station. Change the display information ~ Select “FM/AM.” Ÿ Select the bands. Lights up when receiving an FM stereo broadcast with sufficient signal strength. ! Search for a station to listen—Auto Search. Manual Search: Hold either one of the buttons until “M” Note: FM1 and FM2: 87.5 MHz – 108.0 MHz flashes on the display, then press it repeatedly. FM3: 65.00 MHz – 74.00 MHz When an FM stereo broadcast is hard FM station automatic presetting — to receive
Summary of the content on the page No. 9
Manual presetting 2 Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. 1 3 Searching for FM RDS programme — PTY Search Change the display information Station name (PS) = Station frequency = PTY = (back to the beginning) ~ Activate PTY Search. Ÿ Select one of the PTY codes (programme types). See page 10 for details. ! Start searching. If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in. Continued on the
Summary of the content on the page No. 10
Storing your favorite programme types You can store your favorite PTY codes into the number Preset PTY codes in the number buttons (1 to 6): buttons. 1 Select a PTY code (see right column). 2 Select a preset number. PTY codes (available with the control dial): NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, 3 Repeat steps 1 and 2 for storing other OTHER M (music), WEATHER, FINANCE, CHILDREN, PTY
Summary of the content on the page No. 11
To change the Network-Tracking Reception Automatic station selection— setting, see “AF-REG” on page 28. Programme Search • When the DAB tuner is connected, refer to “Tracing the same programme—Alternative Frequency Usually when you press the number buttons, the preset Reception” on page 22. station is tuned in. If the signals from the FM RDS preset station are not Programme A broadcasting on different frequency sufficient for good reception, this unit, using the AF areas (01 – 05) data, tu
Summary of the content on the page No. 12
To stop play and eject the disc Prohibiting disc ejection • Press SOURCE to listen to another playback source. To cancel the prohibition, repeat the same procedure. Pressing (or holding) the following buttons allows you to... 1 Disc type * 2 (Number buttons) * Press: Select track Select folder Locate particular folder MP3/WMA/ 3 Hold: Reverse/fast-forward directly * AAC track Press: Select track Locate particular track directly Audio CD/ Hold: Reverse/fast-forward — CD Text track 1 * This un
Summary of the content on the page No. 13
Listening to the USB device 1 You can connect a USB mass storage class device such as a USB memory, Digital Audio Player * , portable HDD, etc. to the unit. 1 * You can connect both MTP (Media Transfer Protocol) devices and USB mass storage class devices. Attaching a USB memory USB input terminal USB memory 1 2 This unit can play MP3/WMA/WMA-DRM10 * /AAC * /WAV tracks stored in a USB device. 1 * See page 34. 2 * This unit can play back AAC files encoded using iTunes. This unit cannot play back
Summary of the content on the page No. 14
Using the Bluetooth ® devices For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD changer jack on the rear of this unit. See also page 25. • Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device. • Refer to the list (included in the box) to see the countries where you may use the Bluetooth® function. To use a Bluetooth device through the unit (“BT-PHONE” and “BT-AUDIO”) for the first time, you need to establish B
Summary of the content on the page No. 15
2 Select a device you want to connect. 5 Use the Bluetooth device to search and connect. On the device to be connected, enter the same PIN code you have just entered for this unit. “CONNECT” flashes on the display. 3 Use “OPEN’ or “SEARCH’ to connect. Now connection is established and you can use the device through the unit. To connect/disconnect a registered device The device remains registered even after you 1 Select “BT-PHONE” or “BT-AUDIO.” disconnect the device. Use “CONNECT“ (or act
Summary of the content on the page No. 16
Using the Bluetooth cellular phone Return to the device list menu ~ Select “BT-PHONE.” Ÿ Enter Bluetooth menu. ! Make a call or settings using the Bluetooth menu. (See pages 17, 30, and 31.) When a call comes in.... When an SMS comes in.... The source is automatically changed to “BT-PHONE.” If the cellular phone is compatible with SMS (Short Message Service) and “MSG INFO” (message info) is set When “AUTO ANS” (answer) is activated.... to “AUTO” (see pages 30 and 31), the unit rings and The
Summary of the content on the page No. 17
Making a call You can make a call using the following methods. Select “BT-PHONE,” then follow the following steps to make a call: 12 3 (unless mentioned otherwise) Call history Display the Dial Select a call history. Select a name (if it is acquired) or Menu. REDIAL, RECEIVED, MISSED phone number. Phone book Select “PH BOOK.” Select a name from the list. The list of phone number appears. Direct dialing Select “NUMBER.” Enter the phone number. Voice 1 “SAY NAME” appears on the display. command
Summary of the content on the page No. 18
Presetting the phone number You can preset up to six phone numbers. 3 Select a phone number. 1 Display the Dial Menu. 4 2 Select “PH BOOK,“ “MISSED,” or “RECEIVED” whichever you want to use. Using the Bluetooth audio player Pause/start play back* Reverse skip/forward skip Enter setting menu (Device list) ~ Select “BT-AUDIO.” If playback did not start automatically, operate the Bluetooth audio player to start playback. • Refer also to page 15 for connecting/disconnecting/deleting a registere
Summary of the content on the page No. 19
Listening to the CD changer Change the display information (see page 11) It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. See also page 25. • You can only play conventional CDs (including CD Text) and MP3 discs. Preparation Make sure “CHANGER” is selected for the external input setting, see page 29. ~ Select “CD-CH.” Ÿ Select a disc to start playing. Press: For selecting disc number 1 – 6. Hol
Summary of the content on the page No. 20
After pressing MODE, press the following buttons to... Disc type Skip 10 tracks (within TRK RPT: FLDR RND: the same folder) Repeat current track Randomly play all tracks of FLDR RPT: current folder, then tracks of Repeat all tracks of current folder next folders DISC RPT: DISC RND: Repeat all tracks of the current Randomly play all tracks of disc current disc MAG RND: Randomly play all tracks of the inserted discs Skip 10 tracks TRK RPT: DISC RND: Repeat current track Randomly play all
