Summary of the content on the page No. 1
CD RECEIVER KD-S36
RECEPTOR CON CD KD-S36
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Still having trouble??
USA ONLY
Call 1-800-252-5722
http://www.jvc.com
For canceling the display demonstration, see page 4.
Para cancelar la demostración en pantalla, consulte la página 4.
We can help you!
For installation and connections, refer to the separate manual.
For customer Use:
Para la instalación y las conexiones, refiérase al manual separado.
Enter
Summary of the content on the page No. 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
Summary of the content on the page No. 3
How to reset your unit CONTENTS How to reset your unit ................................. 3 How to forcibly eject a disc ........................... 3 Attaching the control panel ......................... 3 Detaching the control panel ......................... 3 Canceling the display demonstration ........... 4 Setting the clock .......................................... 4 OPERATIONS • Your preset adjustments will also be erased (except the registered Bluetooth device, see pages 12 and 13). Bas
Summary of the content on the page No. 4
Canceling the display demonstration 1 Turn on the power. 4 Select “DEMO OFF.” 5 2 (Initial setting) 6 Finish the procedure. 3 Setting the clock 1 Turn on the power. 2 (Initial setting) 3 Select “CLOCK.” 4 Select “CLOCK SET.” 5 Adjust the hour. 6 Adjust the minute. 7 Finish the procedure. 4 EN02-11_KD-S36[J]_1.indd 4 EN02-11_KD-S36[J]_1.indd 4 8 8/7/09 1:50:56 PM /7/09 1:50:56 PM ENGLISH
Summary of the content on the page No. 5
Basic operations Using the control panel 1 • FM/AM: Select preset station. e When the power is turned off: Check the current • HD RADIO: Select channel. clock time when “CLOCK DISP” is set to • SIRIUS/XM: Select category. “CLOCK OFF,” (see page 26). • CD/USB/CD-CH: Select folder. When the power is turned on: Change the display • IPOD: Enter the main menu/Pause playback/ information of the current source. Confirm selection. r • Return to the previous menu. • BT-PHONE/BT-AUDIO: Enter/go
Summary of the content on the page No. 6
6 * You can use this function only when “IPOD MODE” is available for the connected iPod (see pages 33 and 34). 7 * You can still adjust the volume during pause when the selected source is CD/USB/USB-IPOD. Before resume playback, check to be sure that you have not raise the volume level too much. Display window 1 Bluetooth indicator p Menu hierarchy position indicator— (bottom), 2 Tr (track) indicator (top), (middle) 3 Source display / Disc number / Track number / q Status of Bluetooth device
Summary of the content on the page No. 7
Before using the remote controller: 3 Adjusts the volume level. • Aim the remote controller directly at the remote 4 Selects the sound mode. sensor on the unit. 5 Selects the source. • DO NOT expose the remote sensor to bright light 6 For Bluetooth cellular phone: (direct sunlight or artificial lighting). – Answers calls if pressed briefly. – Rejects calls if pressed and held. 7 • Searches for stations if pressed briefly. • Fast-forwards or reverses the track if pressed and held. • Changes t
Summary of the content on the page No. 8
Listening to the radio Select “FM” or “AM.” 1 Search for a station to listen—Auto Search. 2 When a station is tuned in, searching stops. To stop searching, press the same button again. • You can also search for a station manually—Manual Search. Hold either one of the buttons until “M” flashes on the display, then press it repeatedly. • When receiving an FM stereo broadcast with sufficient signal strength, the ST indicator lights up on the display. Improving the FM reception Storing stations
Summary of the content on the page No. 9
Manual presetting (FM/AM) 3 You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number “04.” Selecting preset station 1 or 2 Select preset number “04.” [Turn] = [Press] Disc/USB operations Playing a disc Turn on the power. 1 Insert a disc. 2 All tracks will be played repeatedly until you change the source or eject the disc. Caution on volume setting: Prohibiting disc ejection Digital devices (CD/USB) produce very little noise co
Summary of the content on the page No. 10
Playing a file on a USB device This unit can play MP3/WMA files stored on a USB mass storage class device. You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, portable HDD, etc. to the unit. • You can also connect an Apple iPod/iPhone to the USB input jack. For details of the operations, see pages 20 – 22. Turn on the power. 1 Connect a USB. 2 All tracks will be played repeatedly until you change the source or disconnect a device. USB memory If a USB de
Summary of the content on the page No. 11
Disc/file operations Selecting a track/folder Selecting the playback modes You can use only one of the following playback modes at a time. 1 [Turn] = [Press] 2 [Turn] = [Press] • For MP3/WMA discs, select the desired folder, REPEAT Ô RANDOM then the desired track by repeating the control dial procedures. 3 • To return to the previous menu, press BACK. [Turn] = [Press] Pressing (or holding) the following buttons allows you to... TRACK RPT : Repeats current track [Press] Pause/resume playb
Summary of the content on the page No. 12
Using the Bluetooth ® devices For Bluetooth operations, it is required to connect the Registering using “OPEN” Bluetooth adapter (KS-BTA200) (not supplied) to the Preparation: Operate the device to turn on its CD changer jack on the rear of this unit. Bluetooth function. • Refer also to the instructions supplied with the 1 Select “BT-PHONE” or “BT-AUDIO.” Bluetooth adapter and the Bluetooth device. • Refer to the list (included in the box) to check the countries where you may use the Blueto
Summary of the content on the page No. 13
5 Use the Bluetooth device to search and 5 For available devices... connect. 1 Enter the specific PIN code of the device to the On the device to be connected, enter the same unit. PIN code you have just entered for this unit. Refer to the instructions supplied with the “CONNECTED” appears on the display. device to check the PIN code. Now connection is established and you can use the 2 Use the Bluetooth device to connect. device through the unit. Now connection is established and you can
Summary of the content on the page No. 14
Using the Bluetooth cellular phone Select “BT-PHONE.” 1 Enter the Bluetooth menu. 2 Make a call or setting using the Bluetooth setting menu. 3 — (See the following and page 25.) When a call comes in.... Making a call The source is automatically changed to “BT-PHONE.” You can make a call using the following methods. • The display will flash in blue (see “RING COLOR” Select “BT-PHONE,” then follow the following steps to on page 28 for setting). make a call: When “AUTO ANSWER” is activated....
Summary of the content on the page No. 15
Direct dialing: Using the Bluetooth audio 1 Select “NUMBER.” player Select “BT-AUDIO.” If playback does not start, operate the Bluetooth audio player to start 2 Select a number. playback. • Operate the Bluetooth audio player to pause (if playback does not pause when you change the source). 3 Move to the next (or previous) number position. Reverse skip/forward skip Pause/start playback* 4 Repeat steps 2 and 3 until you finish entering the phone number. 5 Enter the Bluetooth menu (
Summary of the content on the page No. 16
Listening to the HD Radio ™ Broadcast Before operating, connect HD Radio tuner box, Searching for HD Radio stations KT-HD300 (not supplied) to the CD changer jack on the only rear of the unit. What is HD Radio Technology? HD Radio Technology can deliver high-quality digital sound—AM digital will have FM-like quality (in stereo) Changing HD Radio reception mode and FM digital will have CD-like quality—with static- While receiving an HD Radio broadcast, the unit free and clear reception. F
Summary of the content on the page No. 17
Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer (not supplied) with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs. Preparation: Make sure “CH/IPOD” is selected in the “SRC SELECT” = “EXT IN” setting, see page 29. Select “CD-CH.” 1 Enter the list mode. 2 Select a disc, folder, then the track. 3 Playback starts automatically. [Turn] = [Press] • If t
Summary of the content on the page No. 18
Listening to the satellite radio Before operating, connect either one of the following (not supplied) to the CD changer jack on the rear of this unit. • JVC SIRIUS satellite radio System, SC-C1 and KS-SRA100, PnP, SC-VDOC1 and KS-SRA100, for listening to the SIRIUS Satellite radio. • XM satellite radio System, JVC Smart Digital Adapter–XMDJVC100, CNP2000UC and CNPJVC1 for listening to the XM Satellite radio. GCI (Global Control Information) update • If channels are updated after subscription,
Summary of the content on the page No. 19
Select “SIRIUS” or “XM.” 1 Select a category. 2 SIRIUS: If you select “ALL,” you can tune in to all the channels of all categories. Select a channel to listen. 3 • Holding the button changes the channels rapidly. • While searching, invalid and unsubscribed channels are skipped. XM: If you do not select a channel within 15 seconds, category selected in step 2 is canceled. You can select all channels of all categories now (including non- categorised channels). Storing channels in memory Checking
Summary of the content on the page No. 20
Listening to the iPod/iPhone You can connect the iPod/iPhone using the following cable or adapter: Cable/adapter To operate USB 2.0 cable (supplied with the iPod/iPhone) to the See “When connected with the USB cable” below. USB input jack on the control panel Interface adapter for iPod, KS-PD100 (not supplied) to See “When connected with the interface adapter” on the CD changer jack on the rear of the unit page 21. • Disconnecting the iPod/iPhone will stop playback. Press SRC to listen to anoth
